Printed Circuit Board Connectors Explained: Types, Board-to-Board Methods, Headers, and Sourcing Guide

What Are the Main Types of PCB Connectors and What Connection Problems Do They Solve?

The core types of printed circuit board (PCB) connectors typically include board-to-board, wire-to-board, card-edge, FFC/FPC, terminal block, and header/socket connectors. Although wire-to-wire connectors are not necessarily mounted on a PCB, they are often used in conjunction with PCB wiring harness systems and can therefore be discussed as part of system-level interconnection solutions. Classification should first be based on the type of mating interface, followed by considerations of mounting method, pitch, orientation, and locking mechanism.

Connection Object → Connector Type → Typical Application Scenarios

To help engineers quickly establish a mapping relationship between"connection objects → connector types → practical scenarios", the table below classifies the most common printed circuit board connectors by mating interface and provides typical application examples. You can use this table directly as your primary reference for selection.

Connection Object Typical Connector Types Common Engineering Application Scenarios
Board-to-Board (BTB) Board-to-board connectors, mezzanine connectors, floating connectors Stacked PCB modules (e.g., motherboard + daughter card), memory modules, and backplanes
Wire-to-Board (WTB) Wire-to-Board connectors, PCB header + wire housing with crimp terminals Sensor harness connection to the control board, power cable connection to PCB, and fan power supply
Wire-to-Wire (WTW) Wire-to-wire connectors, in-air connectors Wire harness extension, battery pack to device, lighting daisy chain
FFC/FPC Flexible flat cable connectors, flip-type/slide-type connectors Laptop display flex cables, camera modules, and foldable smartphones
Card Edge PCB edge fingers + card-edge connectors PCIe slots, memory slots, and game cartridges
Terminal Block Terminal blocks, barrier-style, screw-clamp, spring-clamp, or pluggable terminal blocks Industrial PLCs, power modules, variable-frequency drives
Header / Socket Pin headers, socket headers, female headers / machined-pin sockets Development board peripheral expansion (Arduino), pluggable modules/development modules

The first rule of classification: First, look at what is on the other end of the interface---is it another PCB, a wire (discrete cable), or a flexible flat cable?

What exactly is the difference between a Connector, Header, Socket, Terminal, and Pad?

In practical engineering communication, many people use terms like "connector", "pin header", "socket", "terminal,", and even "pad" interchangeably, leading to errors in procurement or assembly. The table below thoroughly clarifies the distinctions between these five core terms from three perspectives: precise definitions, typical forms, and common misuses.

Term Precise Definition Typical Form Common Misuses
Connector Refers generally to any component that provides a detachable electrical connection Includes the complete structure, such as the housing, terminals, and latches Referring to all connectors as "plugs"
Header Typically refers to a male pin-type connector soldered onto a PCB and designed to mate with a socket, jumper, or wire-end housing Single-row/double-row pin headers, shrouded headers, right-angle headers Treating the header as synonymous with the entire connector
Socket The female counterpart that pairs with a header, typically containing spring contacts IC sockets, female headers, RJ45 sockets Believing that a socket is used only for chips
Terminal An individual conductive contact in a connector, or each pole in a terminal block Crimp terminals, screw terminals Mistaking "Terminal" for "Connector"
Pad An exposed copper pad on a PCB; not necessarily a connector Test points, button gold fingers, antenna feed points Referring to a "Pad" as a "Connector"

Clarifying Common Misconceptions

Misconception 1: Many people refer to all PCB connectors simply as "headers".

In fact, headers are just one type of male connector. Especially in wire-to-board applications, it is more common to use a latch-type housing with crimp terminals rather than traditional pin headers.

Misconception 2: Board-to-Board (BTB) and Wire-to-Board (WTB) are interchangeable.

In reality, their structures and applications differ. BTB connects directly to PCB pads or through-holes at both ends; WTB connects to a PCB at one end and a wire harness at the other. Due to differences in stress distribution, vibration resistance requirements, and current-carrying capacity, these two types of connectors are generally not interchangeable.

Misconception 3: FFC/FPC is merely a special type of cable and does not qualify as a connector.

Structurally speaking, FFC/FPC cables are flexible interconnect media; the PCB-mounted FFC/FPC connector or receptacle is the connector component.

Misconception 4: Terminal blocks cannot be considered connectors.

This statement is inaccurate. Terminal blocks are one of the most common types of PCB connectors in industrial equipment, typically used for wire-to-board or wire-to-wire connections, with an emphasis on reliable wiring and ease of maintenance.

Three Engineering Dimensions for Selecting "Connector Types"

Selection should not be based solely on the objects being connected; it also requires in-depth consideration of installation methods, pitch, locking mechanisms, and typical failures. The table below uses the three most common connector types (Board-to-Board, Wire-to-Board, and FFC/FPC) as examples to compare their key dimensions in engineering practice, helping you make quick decisions.

Dimension Board-to-Board Wire-to-Board FFC/FPC
Installation Method Primarily SMT (Surface Mount Technology), with some through-hole SMT or through-hole PCB header + crimped wire housing SMT, flip-top/slide-in/rear-lock
Pitch 0.4 mm to 2.54 mm; 0.35 mm for high-density applications 1.0 mm to 5.08 mm; larger for power applications 0.30 mm to 1.25 mm for many fine-pitch FFC/FPC connector families
Locking Mechanism Mechanical friction, metal latch, floating lock Pre-lock, secondary lock, TPA Flip-cover compression, slide-lock
Common failures SMT solder-joint defects; mating misalignment; insufficient coplanarity or retention Terminal pin pull-out, poor crimping Gold finger lifting, flex cable tear

● What Are the Most Common Types of PCB Connectors?

The most common types of PCB connectors are board-to-board, wire-to-board, wire-to-wire, edge-mounted, FFC/FPC, terminal blocks, and pin headers/socket headers. For PC-focused identification, this guide to types of connectors on motherboard maps these connector concepts to power, storage, fan, USB, and front-panel headers.

The comparison table below provides a one-sentence definition for each of these seven major connector categories and directly lists typical electrical and mechanical applications to help you quickly identify the most suitable use case for each type.

Connector Type One-Sentence Definition Typical Electrical & Mechanical Applications
Board-to-Board Connector Directly connects two PCBs, allowing them to be stacked or placed side-by-side without cables Modular electronics (e.g., motherboard + daughter card), high-density stacking; commonly used pitch ranges from 0.4--1.27 mm, prioritizing low profile and high signal integrity.
Wire-to-Board Connector Connects discrete wires or wire harnesses to a PCB, enabling pluggable wire-to-board interconnects. Sensor harnesses, fan power supply, and internal power distribution require vibration-resistant locking mechanisms (e.g., TPA, pre-locking). The current rating depends on the connector series, terminal size, wire gauge, temperature rise, and datasheet limits.
Wire-to-Wire (Wire-to-Wire Connector) Direct connection between two wires or wire harnesses, bypassing the PCB. Wire harness extensions, in-air connections between battery compartments and devices, are commonly found in home appliances and automotive wire harnesses.
Card Edge (Card Edge Connector) Gold fingers on the PCB edge are inserted directly into the connector slot, eliminating the need for an additional male connector PCIe slots, memory modules, and game cartridges can support high-speed differential signals when the connector, footprint, PCB stack-up, and standard are designed for the required data rate.
FFC/FPC Connector (Flexible Flat Cable/Flexible Printed Circuit Connector) Micro-sockets used to connect flexible flat cables (FFC) or flexible printed circuits (FPC), often featuring a flip-cover or slide-lock mechanism. Laptop display cables, camera modules, foldable smartphones; pitch 0.30--1.25 mm, ultra-low profile (≤2 mm).
Terminal Block A connector that secures wires using screws or spring clips, commonly used for field wiring in industrial applications. PLCs, inverters, power modules; supports field wiring; current and temperature ratings depend on terminal block series, conductor size, and datasheet derating.
Pin Header / Socket The most basic PCB male pin headers and their matching female sockets are used for board-to-board or wire-to-board connections. Development board expansion interfaces (Arduino), test fixtures, and low-cost board-to-board connections; straight posts, right-angle posts, square pins, or machined contacts, with 2.54 mm pitch being the most common.

Additional Classification Notes: The above types are not mutually exclusive — for example, a male pin header paired with a female socket can function as a board-to-board connector or, when combined with a terminal-equipped housing, as a wire-to-board connector. The true classification criteria should first consider the mating relationship (board-to-board, wire-to-board, wire-to-wire, flexible-to-board), followed by the installation technology (SMT, through-hole, crimp, solderless).

Common approaches for high-density, high-speed, low-profile, and fine-pitch projects

High-density pin scenarios: Prioritize board-to-board connectors. Common solutions include dual-row or quad-row configurations with 0.4 mm pitch; if assembly tolerances are significant, consider floating connectors to improve alignment tolerance.

High-speed signal scenarios: For interfaces such as PCIe, USB, and SerDes, edge-mounted connectors or specialized high-speed board-to-board connectors are more suitable, including models with 0.50 mm pitch and a differential-pair shielding structure. Impedance control is particularly critical in these applications.

Applications with Low-Profile Constraints: If Z-axis space is limited, FFC/FPC connectors can be selected, with typical mated heights kept within 1.0 mm; ultra-low-profile wire-to-board connectors, such as side-insertion or horizontal-mount configurations, can also be used.

Fine-pitch wiring scenarios: For connection requirements at 0.3--0.5 mm pitch, FFC/FPC or board-to-board connectors are common choices, but special attention should be paid to SMT placement accuracy and the design details of pads and solder mask.

Additional Note: Connectors Are Not Classified by Appearance Alone

Many engineers tend to assume that the connector type can be determined simply by looking at its form factor. In reality, professional selection requires considering three dimensions simultaneously: mating relationship, mounting technology, and locking mechanism.

Mating Relationship: Whether the mating surface is a PCB, wire, or flexible cable.

Mounting Technology: SMT is suitable for high-density, automated assembly; through-hole is better suited to withstand mechanical stress; crimping is suitable for solderless applications and field repairs; and solderless structures are commonly found in spring clips or screw terminals.

Locking Mechanism: Non-locking designs are suitable for low-vibration, easy-disassembly scenarios; friction locks are suitable for general vibration environments; snap-lock mechanisms are better suited for high-vibration applications; and secondary locking (TPA) is commonly found in automotive-grade connectors.

Only by considering the form factor, mating interface, and mounting method together can one accurately determine whether a PCB connector is suitable for a specific application.

● What Are the Connection Points, Sockets, and Interfaces on a PCB Called?

Not all "connection points" on a PCB can be directly referred to as connectors. Based on function and structure, common terms include connector, pin header, socket receptacle, terminal block, pad, test point, and edge finger.

Among these, "connector" typically refers to a fully structured, reusable connector assembly; "pin header" and "socket receptacle" are common male-female mating pairs. "Terminal block" is primarily used in wiring applications, while "pad" and "test point" are simply soldering or testing locations and cannot be considered connectors on their own; "edge finger" refers to the gold fingers on the board edge, used to form an electrical connection with a mating socket.

Terminology Reference Table

To prevent engineers from confusing terms such as"connector", "pin header", "socket," and "pad" during communication, the table below clarifies the precise meaning of each term from four perspectives: term name, one-sentence definition, and typical form.

Term Definition Typical Form
Connector (Complete Assembly) A complete assembly comprising a housing, terminals, latches, etc., designed to provide a detachable electrical connection USB receptacles, pin header + socket pairs, wire-to-board housings
Pin Header Male pin headers soldered onto a PCB, typically featuring straight or circular pins with pitch sizes of 2.54/1.27/2.00 mm Single-row/double-row straight or angled pin headers
Socket / Socket Receptacle The female counterpart to a pin header, containing spring contacts Socket, IC Socket, RJ45 Socket
Terminal Block Industrial connectors that secure wires with screws or spring clips, typically green or black Rail-type terminals, spring-clamp terminals
Pad Exposed copper rings or copper surfaces on a PCB, used for soldering components or as connection points Round/square pads, with a tin-plated or gold-plated surface
Test point Specially reserved pads or small holes used for probe testing of voltage/signals Circular pads with holes, often labeled TP1, TP2
Gold Finger Gold-plated parallel copper traces along the PCB edge, designed to be inserted directly into a card slot connector PCIe gold fingers, memory module gold fingers

Key distinction: A pin header and a socket receptacle are merely components of a connector; they form a complete board-to-board connector only when paired. A pin header can be purchased as a connector component, but a complete detachable interconnect requires a mating socket, jumper, or wire-end housing; in engineering terms, it is typically referred to as a "connector pair" consisting of a header and a socket.

Example of a drawing naming box

Recommended naming format: [Function Description] + [Pitch] + [Number of Rows] + [Mounting Method] + [Number of positions] + [Term Type]

Correct Example: 2.54 mm Single-row Through-hole Pin Header 1 x 4 P

Correct Example: 1.00 mm dual-row SMT socket receptacle, 2 x 10 positions

Correct example: 0.50 mm flip-cover FFC/FPC connector footprint, 30 positions

Incorrect example: CONN1 (missing information), Socket (pitch and number of rows not specified)

When annotating on the PCB layout:

For connector footprints: Label them as "J1" or "CN1" on the silkscreen layer, and list the center coordinates and polarity markings for the connector footprint / FFC connector footprint separately on the assembly drawing.

For test points: Label as "TP1" and reserve a cutout.

For gold fingers: Label as "EDGE1" and specify the gold plating thickness.

Incorrect Terminology vs. Correct Terminology

In actual project communication, many incorrect terms can lead to procurement errors or assembly issues. The table below lists the five most common misuses along with their correct terminology, accompanied by explanations of the reasons, to help engineering teams establish a consistent naming convention.

Incorrect Terminology (Prone to Confusion) Correct Terminology Explanation
The pad on the PCB is called a connector Pad or Test Point Since the pad lacks a mechanical plug-and-play structure and housing, it cannot be called a connector.
This pin header is a connector A pin header is only half of a connector; a complete connector requires a socket receptacle or wire terminal housing. A pin header alone cannot be paired with a wire or another board.
The pads on this FFC socket are called a connector The pads are the FFC/connector footprint, while a connector refers to the assembled unit consisting of a plastic housing, terminals, and a cover. Distinguish between the "package pads" and the "actual component".
Refer to terminal blocks as "terminal sockets" "Terminal Block" is a more general term; it should be specified as screw-type or spring-type. Terminal socket is colloquial or ambiguous; formal BOMs should use "terminal block" and specify screw-type, spring-clamp, or pluggable style.
All sockets on a PCB are called "sockets." "Socket" specifically refers to a female connector; "Connector" is a general term; "Header" refers to a male connector. Avoid using "socket" as a generic term for all connectors.

Golden rule of engineering: When communicating, first specify the connection type (board-to-board/wire-to-board/flat cable), then the terminal type (male/female), and finally the mounting method and package pads. For example: "I need a board-to-board connector with a 2.54 mm vertical pin header (male) and an SMT socket receptacle (female). Please send me the FFC/connector footprints for verification."

Why is the connector footprint not the same as the actual connector?

Many novice engineers, when designing PCBs, habitually label the connector package pads simply as "connector". As a result, during procurement, they receive only the copper layout from the Gerber files and never receive the physical connectors. In practice, it is essential to clearly distinguish between:

FFC/connector footprint: The copper pattern and silkscreen markings in the PCB design files are used for soldering the actual connector.

Actual connector: The physical component purchased from a supplier, comprising the complete assembly including the plastic housing, metal terminals, locking mechanism, and other parts.

Procurement example: The BOM lists "FFC/FPC connector, 30-position, 0.50 mm pitch, flip-top"; the "CONN1" annotation on the PCB design is merely a reference design for the package pads, not the procurement item itself.

Key Points: When labeling PCB connection points, prioritize the description format "Function + Pitch + Number of Rows + Mounting Method", and strictly distinguish between complete connectors, pin headers/sockets, pads/test points, and package pads. Remember: pin headers and socket receptacles are used in pairs; FFC/connector footprints are merely placeholders for soldering positions in PCB layout files, not purchasable physical parts.

How Should You Connect Two PCBs or Connect Wires to a PCB?

The most common methods for interconnecting two PCBs include board-to-board connectors, edge connectors, mezzanine connectors, and board-to-board pin header/socket stacking solutions. When connecting wire harnesses to a PCB, wire-to-board connectors, terminal blocks, IDC (Insulation Displacement) connectors, or crimp housing systems are typically used.

When selecting a solution, the key parameters for both board interconnect and wire termination paths should be considered: current load, signal transmission speed, inter-board height, vibration environment, mating frequency, assembly process, and ease of maintenance. These factors determine the suitability of a specific solution.

Scenario---Recommended Connector---Reasons for Non-Recommendation Comparison Table

The table below maps common engineering scenarios to recommended connector types and explains why other solutions are not recommended. You can quickly identify your specific application scenario and directly refer to the recommended solution.

Application Scenario Recommended Connector Type Not Recommended and Reasons
Two PCBs stacked parallel to each other (main board + daughter card) Board-to-Board (BTB) connectors, Mezzanine connectors WTB connectors are generally unsuitable as the primary solution for direct board-to-board alignment and high-density inter-board signaling.
Two PCBs placed side-by-side on the same plane Edge connectors (gold fingers + slots) or flexible cables + FFC/FPC Board-to-board connectors (may become unsuitable when board spacing or alignment exceeds the connector's supported range, and they occupy too much space)
Peripheral expansion for development boards (e.g., Arduino) Pin headers + socket headers (2.54 mm board-to-board stacking) IDC connectors may be less suitable for frequent module swapping, depending on connector design, cable routing, and rated mating cycles.
Sensor/fan harnesses connected to the PCB Wire-to-Board connectors (with latch-type crimp housings) Board-to-board connectors (cannot be directly terminated with wire harnesses)
Industrial PLC field wiring Terminal blocks (spring-loaded or screw-type) Crimp-type wire-to-board (cannot be crimped on-site; highly tool-dependent)
High-vibration environments (automotive, drones) Wire-to-board with TPA or CPA locks, or floating BTB Unlocked pin headers (prone to loosening), standard edge clips (poor vibration resistance)
Ultra-high density, confined spaces (laptop internal displays) FFC/FPC connectors (flip-up/slide-out type) Through-hole or wide-pitch connectors are usually unsuitable for very confined spaces.
Test points requiring frequent plugging and unplugging Test probe sockets, guided BTB or round-hole female headers Standard pin headers may have limited mating-cycle life unless rated otherwise.

How to Choose a Connection Method: A 5-Step Selection Guide

The following 5-step selection process proceeds in the order of "Interconnection objects → Electrical/mechanical interface → Mounting technology → Locking mechanism → Maintainability". Each step provides clear decision criteria, making it suitable for direct application during the design phase to ensure no critical decision points are overlooked. (The values below are for preliminary screening only; final determinations should be based on specific connector datasheets, temperature rise tests, mechanical life tests, and system-level validation.)

Step 1: Identify the Interconnection Targets

  • Two PCBs → Proceed to the board-to-board interconnect path
  • wire harness-to-PCB connection → Follow the wire termination path

Step 2: Determine Electrical and Mechanical Boundary Conditions

  • Rated current (per pin): ≤1 A? 1--5 A? >5 A?
  • Signal speed: Low speed (<1 MHz)? High speed (>1 Gbps)? Differential pairs?
  • Board-to-board height (BTB only): 0.50 mm? 5.00 mm? 20.00 mm?
  • Vibration rating: Consumer grade? Industrial grade? Automotive-grade high-vibration environment?
  • Mating cycles: <50 cycles (single-use assembly)? >1,000 cycles (frequent maintenance)?

Step 3: Select Mounting Technology (SMT vs. Through-Hole)

  • SMT: SMT generally has lower mechanical retention than through-hole unless reinforced with board locks or anchors.
  • Through-hole: Through-hole generally provides higher solder-joint strength and is often suitable for higher mechanical loads, larger currents, vibration-prone environments, or manual assembly.

Step 4: Determine the Locking Mechanism and Misinsertion Prevention Design

  • No locking mechanism → Limited to low-vibration, low-insertion-cycle applications
  • Friction Lock → Commonly used in consumer electronics
  • Snap-lock or secondary lock (TPA) → often used in automotive and industrial connector applications
  • Misinsertion prevention → Polarized pins, keyed design, asymmetrical housing

Step 5: Verify maintainability and assembly process

  • Does it require field termination? → Consider field-installable terminal blocks, IDC connectors, or approved field-crimp systems.
  • Do daughter boards require separate testing? → Select detachable BTB or pin-to-pin connectors
  • Pre-terminated wires? → Crimp housing + pre-installed terminals

Design Checklist (for Schematic & Layout Stages)

During the schematic and layout phases, checking the items in the table below can effectively prevent board revisions or reliability issues caused by connector selection oversights. It is recommended to print this out as a checklist for design reviews.

Check Item Yes/No Remarks
1. Connection type is clearly defined (board-to-board / wire-to-board / wire-to-wire) □
2. Current capacity: derate current per pin according to the datasheet and temperature-rise data; 80% may be used as an initial estimate of the rated value in the specification sheet □
3. Signal integrity: High-speed signals have been impedance-matched and grounded to a reference ground □
4. Mechanical Clearance: No interfering components around the connector □
5. Latching Mechanism: Meets product vibration rating □
6. Mating Cycle: should meet the expected number of mating cycles over the product's lifecycle and be verified against datasheet ratings. □
7. Misinsertion prevention design: Polarization, keying, or different pin counts □
8. Mounting Process: SMT/through-hole/crimping compatible with factory equipment □
9. Serviceability: Is the pluggable module easy to install and remove? □
10. Alternatives: at least one verified pin-compatible or functionally equivalent model □

Examples of Common Development Scenarios

Development Board Socketization (Arduino/STM32 Nucleo)

Using 2.54 mm male header pins + female headers as the inter-board connection solution. Advantages include low cost, high versatility, and ease of manual insertion and removal; disadvantages include the lack of a locking mechanism and poor vibration resistance, which make it unsuitable for mass-production environments.

Stacking of daughter boards (drone flight controller + ESC board)

Select board-to-board connectors with 1.27 mm or 0.80 mm pitch, equipped with metal latch locking mechanisms. The key is to precisely control the height between boards to prevent solder joint cracking caused by assembly stress.

Sensor Harness Connection Board (External Temperature/Humidity Sensors)

Use the required pitch and series based on the mating part; for example, JST XH is typically 2.50 mm, and JST ZH is 1.50 mm, so verify the exact series before specifying, paired with pre-crimped terminal wires. Use crimping for wire termination to avoid manually soldering wires to the connectors.

High-Density Signal Acquisition Board (128-Channel ADC Daughter Card)

Use 0.50 mm pitch floating board-to-board connectors where the datasheet-specified alignment tolerance meets the assembly requirement.

Through-Hole vs. SMT: Impact on Mechanical Strength and Assembly

Through-hole and SMT are two mainstream connector mounting technologies. The table below compares them across four dimensions---mechanical strength, suitable applications, assembly processes, and repair difficulty---to help you make an informed choice based on your specific needs.

Characteristics Through-Hole SMT
Mechanical Strength High (solder fills the hole walls, providing high tensile and bending strength) Lower; relies mainly on surface pads unless reinforced, with delamination risk depending on pad design and mechanical load.
Applications High current, high vibration, frequent cable insertion/removal High-density, thin-profile products, automated reflow soldering
Assembly Process Wave soldering or manual soldering Reflow soldering, high efficiency
Difficulty in repair Difficult to desolder (requires a desoldering pump or heating station) Relatively easy (a hot air gun suffices)

Selection Recommendations: For wire termination connectors (such as wire-to-board power connectors) that must withstand long-term wire tension, prioritize through-hole versions to enhance mechanical strength. For board-to-board connectors handling high-speed signals, prioritize SMT processes to shorten signal stubs and improve signal integrity.

● What Are the Common Ways to Connect Two PCBs and Which Structure Fits Each One?

The most common methods for connecting two PCBs include mezzanine connectors, stacking headers, stacking sockets, card-edge connectors, and board-in connectors. Board-in connectors are typically used when a daughter board or small PCB is inserted into a main board terminal or socket and usually require additional mechanical support. These methods are suitable for various mechanical configurations, including parallel stacking, vertical insertion, removable modular designs, and expansion card connections. When selecting a solution, a comprehensive evaluation based on inter-board height, signal speed, insertion/removal cycle life, alignment tolerance, and mechanical support strength is required.

Structural Comparison Table: Connection Methods vs. Applicable Structures vs. Key Parameters

The table below lists five common inter-board connection methods and their corresponding typical mechanical structures, inter-board height, mating cycles, signal capabilities, alignment tolerances, and typical applications. This facilitates a quick comparison of the advantages and disadvantages of different solutions and helps you identify candidate connector types based on project requirements.

Connection Method Typical Mechanical Structure Board-to-Board Height Range Mating Cycle Life Signal Capability Alignment Tolerance Typical Applications
Mezzanine connector (board-to-board connector) Parallel stacking (main board + daughter board), fixed height 3 mm to 20 mm 50--500 cycles High-speed (>10 Gbps) ±0.3--0.5 mm (floating type) Communication backplanes, FPGA daughter cards, servers
Stacking header (stacking pin header) + socket Parallel stacking, low cost, low profile 4 mm to 18 mm (depending on pin length) 50--100 cycles Low speed (<100 MHz) ±0.2 mm (rigid) Development boards, HMI modules, control boards
stacking socket Parallel stacking, specifically designed for stacking 2 mm to 10 mm 100--500 cycles Medium speed (≤1 Gbps) ±0.3 mm Portable devices, IoT nodes
Card-edge connector Expansion card type (vertical insertion into motherboard slot) Not defined by parallel stacking height; key parameters include PCB thickness, slot height, insertion depth, guide structure, and board edge keepout 50--200 cycles High-speed (PCIe/memory) guided by the slot; alignment tolerance depends on slot geometry, PCB thickness, guide rails, and plating design. PCIe cards, memory modules, industrial control cards
Board-in connector The daughterboard is inserted vertically or at an angle into the motherboard No fixed parallel stacking height; the daughterboard usually stands upright or at an angle. 50--150 cycles Medium to low speed Requires additional mounting brackets Power modules, display driver boards

Note: Parallel stacking types (mezzanine/stacking header) require the two boards to be strictly parallel; expansion card types (card edge) allow vertical insertion; board-in types support 30°--90° insertion.

Scenario Priorities: High Speed, Low Height, High MTBF

Actual projects often involve multiple constraints. The table below lists preferred, secondary, and avoidable connection methods based on four typical priorities: "high-speed signals", "height constraints", "high insertion/removal cycles," and "vibration/shock resistance" to help you make quick decisions when facing conflicting requirements.

Priority Scenario Preferred Connection Method Second Choice Avoid
High-Speed Signals (>1 Gbps, e.g., PCIe/USB) Card edge connector or high-speed mezzanine connector Shielded floating BTB Stacking headers (no impedance control, poor signal quality)
Height-restricted (≤5 mm between boards) Ultra-low-profile mezzanine connector (0.5--2 mm stacking height) Stacking socket Standard stacking header (limited pin length)
High mating-cycle requirement (for example, > 500 cycles, if required by the application) Card edge connector (gold plating thickness ≥0.38 µm) or floating mezzanine connector Board-to-board with guide pins standard pin-to-pin connectors with limited rated mating cycles unless specified otherwise
Vibration/shock resistant Mezzanine connector with locking mechanism Through-hole soldering + screw-fastened stacking header Non-locking stacking header, unless additional screws, standoffs, or retention features are used

List of Selection Steps (for engineering implementation)

The following 5-step selection process narrows down options in the order of "Mechanical Structure → Board-to-Board Height → Electrical Requirements → Alignment Tolerance → Mating Cycle Life". You can follow these steps directly in design documents or review meetings to ensure no critical parameters are overlooked.

Step 1: Determine the mechanical structure

  • Parallel stacking of two boards → mezzanine connector/stacking header/stacking socket
  • Two boards stacked vertically or at an angle → card edge connector / board-in connector

Step 2: Determine Board-to-Board Height (Applicable to Parallel Stacking)

  • ≤2.00 mm → Ultra-thin mezzanine (0.50 mm/0.80 mm pitch)
  • 2--10 mm → stacking socket or short-pin stacking header
  • 10--20 mm → long-pin stacking header or custom mezzanine

Step 3: Evaluate electrical requirements

  • High-speed differential pairs (>1 Gbps) → Card edge or shielded high-speed mezzanine
  • Higher current requirements → select a connector with adequate per-contact current rating, wire/PCB current capacity, and temperature-rise data.

Step 4: Calculate alignment tolerances

  • Multi-connector support → Rigid mating, requiring high coplanarity (<0.10 mm)
  • Single connector + screw mounting → Floating mezzanine (±0.50 mm alignment tolerance)

Step 5: Verify Mating Cycle Life

  • Frequent assembly/disassembly (>200 cycles) → Card edge or mezzanine with guide pins
  • One-time assembly (<10 cycles) → Any cost-effective solution

Engineering selection guidelines (can be directly included in design documents or BOM notes)

This design adopts a parallel stacking structure with an inter-board height of 8mm, a signal rate ≤100MHz, and an insertion/removal cycle count <50.Therefore, a stacking header (stacking pin header) + socket solution was selected, featuring a 2.54 mm pitch dual-row design with through-hole soldering. If future upgrades to high-speed signals are required, it is recommended to replace this with a mezzanine connector (board-to-board connector) and add a floating alignment feature.

For the expansion card solution, a card edge connector is selected, with gold-plated contacts at a thickness of 0.38 µm; the slot design must include guide slots and a locking mechanism. This solution is superior to the stacking header because the latter cannot meet the signal integrity requirements of PCIe Gen3.

Inter-board connections require more than just pitch consideration

Many engineers focus solely on pitch when selecting connectors, but they often overlook these three critical issues:

  • Coplanarity: When using multiple connectors, all pads must lie in the same plane, with deviations controlled within 0.1 mm; otherwise, cold solder joints may occur on some pins.
  • Alignment tolerance: Standard stacked connectors require extremely precise alignment and typically require guide pins or alignment holes; floating mezzanine connectors, however, can compensate for deviations of ±0.5 mm.
  • Mechanical support: The connector alone cannot withstand vibration, especially for large daughter boards; screws or snap-fit supports should be added around the edges.

Best practice: Clearly specify during PCB layout: "After selecting the connector, mechanical stacking simulation should be performed to verify that coplanarity and alignment tolerances meet requirements".

The connection solution for two PCBs primarily depends on the mechanical structure (parallel stacking, vertical insertion, or expansion card type), electrical requirements (high-speed, low-speed, or high-current), and the operating environment (vibration intensity, insertion/removal frequency). Typically, mezzanine connectors are preferred for high-speed floating-alignment scenarios, stacking headers are suitable for low-cost, low-speed stacking applications, and card-edge connectors are designed for expansion-card structures. When selecting a connector, it is essential to verify coplanarity, alignment tolerances, and mechanical support strength to prevent solder cracking or poor contact issues during mass production.

● Which Connector Should You Choose When Connecting Wires, Modules, or External Devices to a PCB?

When connecting wire harnesses to a PCB, the choice of solution depends primarily on the application scenario: crimp-to-housing systems (wire-to-board connectors) are the standard choice, offering high assembly efficiency and good reliability.

For industrial field wiring, terminal blocks are the preferred choice, as they offer intuitive wiring and support screw fastening. For flat cables or ribbon cables, use IDC (Insulation Displacement) connectors, which pierce the insulation directly without requiring stripping. For flexible flat cables, select FFC/FPC connectors, which save space and provide excellent signal integrity. In high-vibration environments or applications involving frequent plugging and unplugging, latching housing systems should be used to ensure long-term stability. Direct soldering of jumper wires is suitable only for extremely low-cost, low-volume prototypes or single-use products that require no maintenance; it should be avoided for mass-produced products or equipment that require maintenance.

Application Scenario Table: Preferred Solutions vs. Alternative Solutions vs. Not Recommended Solutions

The table below maps common wiring scenarios (discrete harnesses, field wiring, flat cables, high vibration, high current, etc.) to preferred, alternative, and non-recommended solutions, helping you quickly identify the most suitable connector type for your specific application.

Application Scenario Preferred Solution Alternative Solution Not Recommended Solution (and Reasons)
Discrete Wiring Harnesses (1--20 wires) to Board, Consumer/Industrial Wire-to-Board crimp housing + terminals (e.g., JST XH, ZH, PH series) Pin headers + DuPont wires (prototypes only) Direct soldering (non-removable, difficult to repair)
Field wiring (PLC, power modules) Terminal blocks (spring-loaded or screw-type) Plug-in terminal blocks (removable) Crimp housing (terminals cannot be crimped on-site)
Multi-conductor flat ribbon cables (10--64 conductors) IDC connector (Insulation Displacement Connector) (piercing type, no stripping required) Crimp-type D-sub Individual Soldering (Extremely Low Efficiency, Prone to Short Circuits)
Flexible flat cable (FFC, pitch 0.5--1.25 mm) FFC/FPC connectors (flip-top or slide-in) Soldering FPC to board (non-removable) Crimp housing (incompatible with flat ribbon cables)
Frequent insertion and removal (>500 cycles, e.g., test interfaces) Wire-to-board or terminal block with latches/clips Friction-lock housing with guides Unlocked pin headers (prone to loosening, short lifespan)
High-vibration environments (automotive, drones) Wire-to-board or terminal blocks with TPA (Terminal Position Assurance) or screws Secondary-locking housing Non-locking crimp housing (risk of terminal pin disengagement)
High current (>5A per wire) Wide-pitch terminal blocks or high-power wire-to-board (e.g., 5.08 mm pitch) Soldered terminal strips Fine-pitch crimp housing (excessive temperature rise)
Very low-cost, single-use products (toys) Direct soldering of jumper wires (acceptable only in this scenario) Low-cost pierce-type IDC Any pluggable connector (too expensive)

Key Distinctions:

  • Crimp housing: Terminals are crimped onto the wire in advance, suitable for mass-production wire harness assembly.
  • IDC connector (Insulation Displacement Connector): No wire stripping required; the cable is pressed directly into the cutting blades. The preferred choice for the quick termination of flat cables.
  • Terminal block: Wires are connected on-site using a screwdriver; no special tools are required, making it the most convenient option for small batches or maintenance.
  • Soldered wire: Wires are soldered directly to PCB pads; non-removable; suitable only for prototype testing or designs intended for permanent disposal.

Key Selection Criteria Checklist (Pitch, Current Rating, Wire Range, Locking Type)

After determining the application scenario, you must verify four core parameters: pitch, current rating, wire range, and locking mechanism. The table below lists typical values and selection recommendations for each parameter — these are essential technical verification steps that must not be skipped during the engineering selection process.

Parameter Description Typical Values and Recommendations
Pitch Center-to-center distance between adjacent pins Small-signal: 1.0--1.25 mm; Power/signal mixed: 2.0--2.54 mm; High-current: 3.5--7.62 mm
Current Rating Maximum Continuous Current per Terminal Derating should generally be performed based on the current rating in the datasheet, temperature rise curves, ambient temperature, and the simultaneous current-carrying conditions of adjacent terminals. When detailed temperature rise data is unavailable, 80% may be used as a preliminary conservative estimate to be verified through temperature rise testing. Example: 2.54 mm crimp terminals typically handle 3A; 5.08mm terminals can handle up to 15A
Wire Range Compatible wire AWG or cross-sectional area Common: 26--22 AWG (signal), 18--14 AWG (power). Mismatch may result in poor crimping or terminal damage
Locking Type Mechanical design to prevent loosening No Lock (Prototype Only), Friction Lock (Consumer), Snap Lock (Industrial), TPA/CPA (Automotive/High Vibration)

When selecting a terminal, first check the current rating to ensure that no single wire exceeds 80% of the terminal's current-carrying capacity; then select a pitch that matches the wiring density; finally, confirm that the wire range matches the harness specifications and choose a locking type suitable for the vibration level.

Procurement and Engineering Collaboration Tips (Avoiding Mis-purchases)

Many project delays stem from a lack of alignment between engineering and procurement regarding the definition of "connectors". Below are several key pieces of information that should be clearly defined in the BOM and purchase orders, along with best practices for engineering and procurement collaboration.

  • Complete part number ( ): For example, "Molex 5264 Series, 2.54 mm, 2x1-pin, locking housing, with 5263 terminals"
  • Compatibility: The housing, terminals, and sleeving should be from the same series
  • Pre-crimped status: Should you buy a finished harness or purchase loose parts to crimp yourself?
  • Common pitfalls: Specifying only "JST XH connector" without clarifying whether it refers to the PCB-side header or the wire-side housing, let alone the pitch and pin count

Recommended approach: Engineering should provide a complete connector list (PCB end + wire end + terminals + crimping tool model). Procurement should place a single order to avoid missing housings or purchasing the wrong terminals.

Why is "direct soldering" usually not a good choice?

Although direct soldering is still used in some extremely low-cost prototypes, it has obvious drawbacks such as a lack of maintainability, low efficiency, and poor reliability. The table below summarizes four core issues that help explain why direct soldering should be avoided in mass-production designs.

Issue Description
Unserviceable Once soldered, the PCB and wire harness cannot be separated; repairs require cutting the wires and re-soldering, which damages the pads
Low Production Efficiency Manual soldering of each wire incurs significantly higher costs than crimping the housing. Automatic or semi-automatic crimping
Poor Reliability The wire breaks easily at the base of the solder joint due to harness bending, and there is a lack of stress relief
Not suitable for mass production In mass production, the assembly speed of crimp housings and terminals is 5--10 times faster than soldering

The only acceptable scenarios are prototype debugging, extremely low production volumes (<10 units), and applications where the product will never be disassembled during its lifecycle, and cost is extremely critical. Even in these cases, consider using IDC connectors or terminal blocks as alternatives.

Summary Comparison: Comparison of Three Mainstream Wire Harness Termination Methods

Finally, we have compared the four termination methods (crimp housing, IDC, terminal blocks, and direct soldering) across four dimensions---applicable wire types, tooling requirements, reusability, and recommended scenarios---to help you make a final decision during solution evaluation.

Termination Method Applicable Wire Types Tool Requirements Reusability Recommended Scenarios
Wire-to-Board (Crimp Housing) Discrete Wire (Single-strand/Multi-strand) Crimping pliers Yes (with lock) Mass-produced electronics, pre-assembled in wire harness factories
IDC connector Flat ribbon cable Specialized IDC crimping jigs, crimping stations, or manufacturer-recommended crimping tools Yes Internal computer cables, drive interfaces
Terminal block Discrete wires (solid/stranded) Screwdriver (spring-loaded type can be used by hand) Yes Industrial environments, power input, PLC
Direct soldering Any wire Soldering iron No Prototypes or one-off products only

For the vast majority of wire-to-PCB designs, wire-to-board crimp housing systems are the most balanced choice. For flexible field wiring, use terminal blocks; for flat ribbon cables, use IDC connectors. Always verify the current rating and allow for derating.

What Are the Key Differences Among Headers, Sockets, Board Locks, and Mounting Flanges?

Header connectors and socket connectors describe the electrical connection and mating relationship (male/female); board locks and mounting flanges describe mechanical retention methods (enhancing PCB retention or securing the connector to an external enclosure). These are distinct categories but often coexist on the same connector. Board locks enhance mechanical retention with additional locking tabs or latches, preventing the connector from detaching from the PCB; mounting flanges secure the connector to an enclosure or panel with screws, absorbing cable pull or vibration stress.

Comparison Table: Functional Dimension vs. Implementation Method vs. Typical Form

The table below compares four easily confused terms---Header, Socket, Board Lock, and Mounting Flange---based on four aspects: category, core function, typical form, and whether they exist independently, helping you quickly understand their fundamental differences.

Term Dimension Core Function Typical Form Can Exist Independently
Header connector Electrical connection + pairing relationship Provides male pins, soldered to the PCB, and paired with a socket connector Straight or angled pin headers, single or dual rows, SMT or through-hole Yes, should be paired with a socket or wire-end housing
Socket connector Electrical connection + mating relationship Provides female spring contacts to receive headers or flat cable terminals Header sockets, IC sockets, RJ45 sockets Yes, should be paired with a header or plug
Board lock Mechanical retention (PCB side) Enhances mechanical retention between the connector and the PCB, preventing solder peel Harpoon pins, hook pins, latches, plastic solder tabs No, attached to the connector body
Mounting flange Mechanical retention (external structure) Secures the connector to the chassis/panel via a flange and screws, absorbing external pulling forces Metal or plastic tabs with screw holes No, attached to the connector housing

Headers and sockets address "whether electrical continuity and mating are possible"; board locks and flanges address "whether solder joints will be pulled out or the housing will wobble".

Terminology Clarification Box: Functional Mating vs. Mechanical Retention

Engineers often confuse the concepts of "functional mating" and "mechanical retention". The table below compares them side-by-side across three dimensions---definition, typical implementation, and failure consequences---to clarify their respective roles.

Concept Definition Typical Implementation Consequences of Failure
Functional Mating Functional Mating Achieving electrical contact and signal transmission between the male and female ends of a connector Terminal elastic deformation, contact normal force Open circuit, poor contact
Mechanical Retention Resistance to disengagement between the connector and the PCB or between the connector and the chassis Board lock, latches, screw flanges Pad tear, terminal lift, or complete connector detachment

Headers and sockets ensure proper contact, while board locks and flanges prevent solder joints from loosening.

Common Misconceptions

In practical engineering discussions, the following five misconceptions frequently arise. The table below lists these misconceptions and the facts to help teams establish a unified understanding.

Misconception Fact
Board lock is a type of connector A board lock is an additional securing mechanism on a connector; it is not a separate connector type.
If there is a mounting flange, a board lock is not needed The flange secures the connector to the chassis, while the board lock secures the connector to the PCB; both can coexist.
A header should be paired with a socket A header can also be directly paired with a crimped wire-end housing (such as in a wire-to-board system), in which case the wire-end housing contains a female terminal.
The mechanical strength of an SMT header is equivalent to that of a through-hole header Through-hole headers have significantly higher pull-out resistance than SMT headers; through-hole headers should be prioritized for high-vibration or heavy-duty wiring harnesses.
Mounting flanges are found only on waterproof connectors Various connectors, including industrial I/O, D-sub, USB, and RJ45, can feature a flange and are not limited to waterproof models.

How are headers typically selected in engineering? / "Which header connectors do you use?"

The following 5-step decision path (determine mating partner → select mounting technology → determine pitch/row count/orientation → evaluate need for board lock → decide on mounting flange) covers the main selection variables and can be directly applied to project selection.

When selecting header connectors (pin headers) for actual projects, follow these steps:

Step 1: Determine the mating connector

  • s mating with PCB sockets → Standard pin headers (for board-to-board applications)
  • s mating with a wire terminal housing → Unshielded pin headers (for wire-to-board applications)

Step 2: Select the mounting method

  • Through-Hole: High mechanical strength, vibration resistance, and high current capacity; preferred for industrial and automotive applications
  • SMT: High-density automation, low profile; commonly used in consumer electronics

Step 3: Determine pitch, number of rows, and orientation

  • For signals: 2.54 mm, 1.27mm, 2.00 mm
  • Power/Mixed: ≥2.54 mm
  • Orientation: Vertical (upright) or horizontal (bent legs)

Step 4: Evaluate board lock requirements

  • High pin count (>20 pins) or edge-of-board placement → Add a board lock to enhance mechanical retention
  • High-vibration environments → Board lock is mandatory

Step 5: Consider mounting flange

  • if the wiring's harness is frequently subjected to external forces (e.g., power cords) → Select a flanged model and secure it to the chassis with screws

Typical selection statement:

This design uses a 2.54 mm dual-row vertical through-hole header connector paired with a corresponding socket connector. Since the connector is located at the board edge and the harness is at risk of being pulled, a board lock (spear-shaped retainer) is added to enhance mechanical retention; simultaneously, a mounting flange is added to the chassis side and securely fastened with M3 screws.

Differences Between Through-Hole and SMT Headers in Mechanical Strength and Manufacturing Processes

Through-hole and SMT are the two mainstream mounting methods for headers. The table below compares them across six dimensions---peel strength, lateral thrust resistance, applicable vibration levels, assembly processes, coplanarity requirements, and typical applications---to help you balance high reliability with high density.

Characteristics Through-Hole Header SMT Header
Peel Strength (Vertical Pull-Out) High (solder fills hole walls) Lower; relies mainly on surface pads unless reinforced
Lateral Push Resistance High Medium (may tear the pad)
Suitable vibration rating High (automotive, drones) Medium-low (consumer handheld devices)
Assembly Process Wave soldering / Manual soldering Reflow Soldering
Coplanarity Requirements Low (pins can be fine-tuned) High (all pins should be coplanar)
Typical Applications Industrial control, power supplies, automotive Mobile phones, laptops, SSDs

When the cable harness is expected to exert significant pulling or vibration stress on the connector, prioritize through-hole headers + board locks; if SMT should be used, be sure to add a mounting flange or reinforce with adhesive.

Header connectors and socket connectors address electrical contact issues; board locks and mounting flanges address mechanical retention and external fixation. When selecting a connector, consider both electrical connection and mechanical retention: for high-vibration or high-cable-load scenarios, prioritize through-hole + board lock + flange; for low-stress, high-density scenarios, an SMT header with an appropriate board lock is sufficient.Remember: mechanical retention and functional mating are equally important and indispensable.

● What Roles Do Headers and Sockets Play in PCB Design and How Should You Choose Them

In PCB design, headers typically serve as the male connector (with exposed metal pins), while sockets serve as the female connector (with embedded spring contacts); the male-female pairing enables pluggable connections. Headers are responsible for routing signals or power from the PCB, while sockets are responsible for reliably receiving and maintaining contact.

Their applications are extensive: development board expansion cards, board-to-board stacking, cable harness adapters, and debugging interfaces all rely on them.

Key selection criteria include: pitch, mounting type (through-hole/right-angle/SMT/through-hole), number of rows, current rating, stack height, and insertion/removal cycle life.

Header and Socket Role Comparison Chart

The table below compares the positioning of headers and sockets (as well as female headers) across five dimensions---role, typical form factor, primary function, mating partner, and common applications---to help you understand their respective functions.

Role Typical Form Primary Function Mating Partner Common Applications
Header (Male) Pin/Circular Pin Header Soldered to the PCB, providing rigid pins as connection points Sockets, crimp-on wire terminals, and jumper caps Motherboard I/O pins, daughter board pins, programming interfaces
Socket (Female) Female headers, IC sockets Provides flexible contacts to receive and clamp headers Headers, IC pins, and ribbon cable terminals Accepts daughter boards, plug-in modules, and chip replacements
Female header (female pins/socket) Female headers with sockets (1xN or 2xN) Pairs with standard male headers; can be stacked or placed side-by-side Standard header Development board stacking (e.g., Arduino female header daughter boards)

Female header (female pin header/socket) is essentially a common trade name for a type of socket, specifically referring to the female counterpart of a pin header.

Selection Comparison Table: Mounting Method, Orientation, Pitch, and Applications

When selecting a product, consider the mounting method (through-hole/SMT), orientation (straight/angled), pitch (2.54 mm/2.00 mm/1.27mm/0.80 mm, etc.), and the number of rows (single-row/double-row/multi-row). The table below lists the typical specifications, applicable scenarios, and features of each option to help you quickly match your project requirements.

Selection Parameters Type Typical Specifications Applications Mechanical/Electrical Features
Mounting Method Through-Hole 2.54 mm, 2.0 mm Industrial control, power boards, high-vibration environments High solder strength, pull-out resistance
SMT (Surface Mount) 1.27 mm, 0.80 mm Mobile phones, SSDs, slim devices Suitable for reflow soldering, high coplanarity requirements
Orientation Vertical Any pitch Parallel stacking of boards, vertical insertion and removal Pairing direction perpendicular to the PCB
Right-angle header 2.54 mm, 2.00 mm, 1.27 mm Board-edge connection, horizontal wire harness mounting, backplane Mating direction parallel to the PCB, saving vertical space
Pitch 2.54 mm Standard pitch Development boards, test points, low-density signals Easy to solder by hand; moderate insertion/removal cycle life
2.00 mm / 1.27 mm Medium density Consumer electronics, module interfaces Balance of density and reliability
0.80 mm / 0.50 mm High density Compact devices, stacked modules Requires SMT process; high alignment precision required
Number of rows Single row (1xN) Narrow-body Simple signals, jumpers Saves PCB space
Dual-row (2xN) Wide-body Address/data bus, power + signal mixed High pin count, commonly found on development boards
Multi-row (3+) High-density Dedicated modules Less common, used for specific interfaces

List of Application Scenarios (Differences in Selection for Development Boards, Debug Interfaces, and Mass Production Boards)

Requirements for headers and sockets vary significantly across different application scenarios. The table below lists six typical scenarios---development board expansion, debugging interfaces, mass production stacking, high-vibration environments, harness adapters, and low-cost mass production---providing recommended configurations and selection rationale, while also highlighting solutions to avoid.

Application Scenario Recommended Header/Socket Configuration Reasons for Selection Not Recommended
Development Board Expansion (Arduino Daughter Board) Female header (2.54 mm dual-row through-hole socket) compatible with through-hole headers on daughter boards Compatible with industry standards, easy to manually plug and unplug, and low cost SMT (difficult to solder by hand), fine pitch (prone to misinsertion)
Debugging Interface (SWD/JTAG) Right-Angle Header (Angled Pin Header) 2.54 mm 1x4 or 2x5, Through-Hole, Board-Edge Mount Side-entry, convenient for connecting debug cables, does not interfere with other components Through-hole (requires space above)
Parallel stacking of mass-production boards (daughter board + motherboard) SMT through-hole header + female header, pitch 1.27 mm or 0.80 mm, with locating pins Automated placement, low profile (5--10 mm stack height), high signal density Through-hole (low efficiency), 2.54 mm (insufficient density)
High-vibration environments (automotive modules) Through-hole through-hole headers + snap-lock sockets, pitch 2.00 mm or greater Through-holes provide mechanical strength, and latches prevent loosening SMT, non-locking terminal blocks
Wire harness adapter board (sensor cable) Right-angle header + wire end crimp housing Horizontal mounting saves vertical space; harness leads exit horizontally Through-hole header (inconvenient for vertical harness routing)
Low-cost mass production (home appliance control boards) 2.54 mm single-row through-hole header, used solely as a programming port Used only during the debugging phase; no peripherals are connected during mass production, resulting in the lowest cost Locking mechanism (redundant)

Concise Decision Checklist (6 Criteria for Selecting Header/Socket)

When addressing the question "Which header connectors should you use?", you can systematically evaluate the options based on the following 6 criteria. Each criterion includes branching logic to ensure no critical decision points are overlooked.

① What is it paired with?

PCB socket → Standard pin headers

Wire harness housing → Unshielded pin headers (e.g., JST XH compatible)

Jumper caps → Standard 2.54 mm type

② What pitch should be selected?

Development/Manual assembly → 2.54 mm

High-density automation → 1.27 mm or finer

③ Straight or angled pins?

Vertical insertion in board stack → Straight-pin headers

Side-mounted on board edge → Right-angle pins

④ Through-hole or SMT?

High vibration/high current → Through-hole

High volume/thin boards → SMT

⑤ Do you need a female header?

Place a female header on the main board; the daughter board uses standard pin headers

⑥ Plug-and-play or latch?

Low insertion/removal frequency → Standard non-locking

Frequent/high vibration → Sockets with latches or pin headers with board locks

Specific criteria to avoid incorrect selections (common engineering pitfalls)

The table below summarizes the 5 most common selection errors and their correct solutions, covering issues such as SMT components used for frequent plugging/unplugging, incorrect bend direction, mismatched pitch, incorrect female connector contact type, and the use of long pins on mass-production boards, helping you avoid these pitfalls in advance.

Common Selection Mistakes Correct Approach
Selected an SMT header but used it for frequent manual insertion/removal SMT pads are prone to peeling → Switch to through-hole headers or add a board lock
Reverse orientation of right-angle headers (pins facing inward) Confirm the pin orientation of the right-angle header based on its position relative to the board edge (typically outward)
A 2.54 mm pitch header paired with a 2.00 mm pitch female header Mismatched pitch prevents mating → should be considered the same pitch series
Failure to distinguish between female connector contact types (round holes vs. spring-loaded contacts) Round-hole connectors have a short lifespan (<50 cycles), while spring-claw connectors have a long lifespan (>1,000 cycles) → Choose spring-claw sockets for high-cycle applications
Using long-pin headers (e.g., 11mm pin length) commonly found on development boards on production boards Long pins are prone to contacting the enclosure → Switch to short pins or right-angle headers

● What Is the Real Difference Between a Board Lock and a Mounting Flange?

A board lock is a connector's built-in PCB retention mechanism, such as prongs, latches, or plastic solder tabs, primarily designed to enhance mechanical retention between the connector and the PCB and resist stress from insertion, removal, or delamination after soldering.

A mounting flange is a flange with screw holes extending from the connector housing. It uses screws to directly secure the connector to the chassis or panel, specifically designed to withstand cable harness tugging or vibration from the entire unit.

Although their functions differ, they often coexist: the board lock secures the connector to the PCB, while the mounting flange secures the connector to the chassis.

Comparison Table

The table below compares board locks and mounting flanges side by side across seven dimensions — fixed object, primary function, typical form, need for additional parts, failure consequences, typical applications, and whether they can be used independently — to help you quickly understand their fundamental differences.

Comparison Dimensions Board Lock (Board-to-Connector Mounting) Mounting Flange
Mounting Object Connector ↔ PCB Connector ↔ Chassis/Panel/Bracket
Primary Function Enhances mechanical retention, preventing the connector from detaching from the PCB due to insertion/removal or vibration Provides external mechanical support to withstand cable pull forces, impacts, and system vibration
Typical Forms Harpoon-style pins (metal), hook-style pins, latches, plastic solder tabs Metal or plastic tabs with screw holes (single-sided/double-sided)
Additional parts required No (integrated into the connector) Yes (requires screws, washers, and sometimes nuts)
Consequences of failure Pad tear, pin lift, loose connector Overall connector displacement, housing fracture, mating disengagement
Typical Applications High-cycle connectors (USB, RJ45), edge connectors, large-pitch pin headers Waterproof connectors (M12, aviation connectors), industrial I/O (D-sub), power entry
Can it be used independently Yes (no external mounting required) Basic soldering between the connector and PCB is still required for standalone use (unless fully flange-supported)

Key difference: Board locks provide retention force at the PCB solder joint level, while mounting flanges provide structural fixation at the assembly level

Both may be present simultaneously, but their functions are not equivalent (illustrated with examples)

The table below uses four common connector types (edge-mounted USB, waterproof M12, large-size pin headers, and D-sub) as examples to illustrate whether they include a Board Lock and a Mounting Flange, along with the reasons, to help you understand typical scenarios where both coexist.

Connector Type Does it have a board lock? Does it have a mounting flange Reason
Edge-mounted USB socket Yes (spear-shaped pins) No Only needs to resist the pull-out force of the USB cable; the entire unit is positioned by the housing
Waterproof USB or M12 circular connector Yes (solder tabs + snap-fit) Available (flange + screws) Requires both PCB retention (to prevent solder joint cracking) and panel mounting (waterproof sealing + resistance to pulling)
Large-size header pins (2x25 pins) Available (plastic solder pins or fork-shaped pins) None High insertion/removal force; requires enhanced PCB retention, but no need for mounting to the chassis
D-sub connector (with screw lock) Typically, none (soldered via through-holes) Yes (with screw holes on both sides) Secured to the chassis with screws; soldering is used solely for electrical connection

Typical application scenario: Automotive-grade I/O connectors (e.g., LIN/CAN interfaces) typically feature dual mounting as standard: a board lock to resist PCB vibration, and a mounting flange to secure the connector screws to the metal housing. This ensures that solder joints will not be damaged, no matter how much the harness is pulled.

Combined with Through-Hole Connector Specifications: Hole Tolerance, Assembly Force, and Serviceability

When connectors are soldered via through-hole mounting, the board lock and mounting flange have varying effects on hole tolerance, assembly force, peel strength, and serviceability. The table below compares the differences among three configurations (through-hole only, through-hole + board lock, and through-hole + board lock + mounting flange) for your reference during design.

When connectors are soldered via through-hole, the effects of the board lock and mounting flange are as follows:

Item Through-hole Soldering Only (No Board Lock) Through-hole + Board Lock Through-hole + Board Lock + Mounting Flange
Hole Tolerance Requirements Standard (±0.05 mm) Tighter (board lock pins should be aligned) Stricter (additional flange hole position deviation)
Assembly Force (Insertion Force) Low Medium (requires pressing in the board lock tab) High (requires simultaneous insertion of the terminal, lock tab, and alignment of the flange)
Mating and unmating peel force Medium (solder joints only) High (lock provides additional anchoring) Very high (flange shares the stress)
Serviceability (Desoldering) Easy (solder sucker suffices) Difficult (requires desoldering the lock pin first) Very difficult (flange screws must also be removed)
Typical Recommendations Low insertion/removal, low vibration Moderate insertion/removal, moderate vibration High insertion/removal cycles, high vibration, panel mounting required

Engineering Recommendations:

When is a board lock required? More than 500 insertion cycles or heavy cable harnesses → Board locks, anchors, or mounting flanges should be considered when cable pull, vibration, or mechanical load exceeds solder-joint capacity.

When is a mounting flange required? Continuous cable tension (e.g., power cable ports) → Secure to the chassis or panel using flange screws

Important note when using both: PCB layout must reserve space for mounting flange screws; the positional tolerances of the board lock pins and flange holes must not accumulate to an excessive degree.

Scenario Assessment Checklist

Below is a set of selection questions. Answer "Yes" or "No" for each to quickly determine whether a board lock, mounting flange, or both are required. Intended for the design phase.

Question Yes No
Is the connector located at the edge of the board and frequently plugged and unplugged? → Board lock required → Standard soldering may be sufficient
Will the harness or external plug exert a pulling force on the connector? → A mounting flange is required → A board lock alone may suffice
Is the product's operating environment subject to significant vibration (e.g., automotive or drone applications)? → Both the board lock and the mounting flange are required → Depends on the frequency of insertion and removal
Is the PCB thickness less than 1.0 mm (thin board)? → Avoid using force-fit board locks (which may damage the PCB); use snap-fit or SMT locks instead → Can be used normally
Is the connector large (length >30mm) or has a high pin count (>50)? → A board lock should be used to prevent lifting during reflow soldering or stress concentration during insertion/removal → Small-sized connectors may omit this
Does the connector need to meet waterproof and dustproof requirements (IP rating)? → A mounting flange should be added and used with a sealing gasket → Not required

Summary of Selection Recommendations

Based on the above comparison and checklist, the following four concise selection guidelines are provided, covering high-vibration, panel-mounted, low-retention-force, and low-cost scenarios.

When should you use a board lock + flange combination?

High vibration, frequent plugging/unplugging → board lock + mounting flange (e.g., automotive USB, industrial RJ45 flange-mounted versions)

Primarily panel mounting?

Chassis-to-wall connectors → should be considered a flange; board lock can serve as a secondary measure

Only need to enhance PCB grip?

Board-edge pin headers, large female headers → A single board lock is sufficient

Low-demand scenarios?

Low-frequency plugging/unplugging, low cost → Rely solely on through-hole/SMT soldering

Clear division of labor: Board locks secure the PCB solder joints, while mounting flanges pull against the chassis. Board locks resist peeling, flanges resist pulling; mechanical retention is enhanced by the combination of both.

A board lock is an additional securing structure between the connector and the PCB (e.g., prong-type or latch-type), specifically designed to enhance mechanical retention; a mounting flange, on the other hand, uses flange screws to directly secure the connector to the chassis, withstanding external tensile forces and vibration. Both can be used separately or together, depending on the number of insertion/removal cycles, vibration levels, cable pull force, and panel mounting requirements.

How to Identify an Unknown PCB Connector and Avoid Mistakes in Footprints, Labeling, and Sourcing?

When identifying an unknown PCB connector, it is essential to measure the pitch, number of rows, mounting method (SMT/through-hole), orientation (straight/angled), latching mechanism, terminal structure, and mating system (matching male/female series). Never make a determination based solely on appearance or generic terms such as "MiniJST".

After connector identification is complete, you must also refer to standardized assembly documentation (schematics, PCB silkscreen, assembly drawings, BOM) and a rigorous sourcing guide (including series name, pitch, number of circuits, mounting type, and mating part numbers) to avoid incorrect footprints, purchasing the wrong parts, or installing them in the wrong orientation.

Method for Identifying Unknown Connectors

The following six-step process begins with measuring mechanical dimensions, progresses to determining the mounting method, inspecting locking mechanisms, identifying the mating system, and locating manufacturer markings, and concludes with verification against the datasheet. Specific instructions are provided for each step; it is recommended to follow them sequentially during on-site operations.

Identifying Unknown PCB Connectors in 6 Steps:

Step 1: Measure Dimensions

  • Use a vernier caliper to measure the pitch (2.54/2.0/1.25/1.0/0.5 mm), number of rows, and length, width, and height. Note the housing features (guide pins, anti-misinsertion tabs).

Step 2: Inspect the Installation

  • Through-hole: Leads pass through the board; SMT: Leads are mounted flat. Straight or bent leads?

Step 3: Check for snap-lock terminals

  • Are there latches/TPA? Are the terminals pin headers, FFC flat cables, or crimp terminals?

Step 4: Determine male/female pairing

  • Is this a male or female connector? Is it for a PCB, wire harness, or flat cable? Search for JST XH or Molex 5264 series.

Step 5: Look for Markings

  • Is "JST/ZH/5264" engraved on the housing? If no model number is present, search using a combination of keywords such as "pitch + number of rows + mounting method + locking feature" (e.g., "2.54 mm dual-row through-hole locking female header").

Step 6: Verify the datasheet

  • Download the datasheet for the suspected model; only confirm if the dimensions match 100%.

Common Mistakes: Connectors that look like "MiniJST" may actually belong to four completely different JST series: ZH, SH, PH, and XH:

ZH: 1.5mm pitch, SH: 1.0mm pitch, PH: 2.0mm pitch, XH: 2.54 mm pitch. While their appearances are similar, their dimensions and terminals are completely incompatible. It is meaningless to generically refer to them as "MiniJST" in procurement drawings; you must specify the exact series name.

Purchasing Checklist

Once the series has been identified, the purchase order or BOM must include the nine items listed in the table below. Examples are provided for each item. It is recommended that the engineering department complete the form and send it to the procurement department to avoid purchasing the wrong parts due to incomplete information.

Verification Items Required Information Example
1. Series Name/Manufacturer Specify the manufacturer and series JST XH, Molex 5264, TE 171822
2. Pitch Value + Unit 2.54 mm
3. Number of rows & number of circuits (number of pins) Number of rows x Number of pins per row Dual row 2 x 10 = 20P
4. Mounting Method SMT / Through-hole / Crimp Through-hole
5. Orientation Upright / Angled (Lying) 90° Angled
6. Locking Mechanism No Lock / Friction Lock / Snap Lock / TPA Snap Lock
7. Mating Part Part Number Specify the manufacturer's part number for the mating end Mates with JST XH wire end housing (Part No. XHP-2)
8. With or without board lock Yes/No Has a fork-shaped pin
9. Rated current/voltage Specify as needed 3A, 250V

Procurement Collaboration Note: The Engineering Department provides the above table. Procurement should search on distribution platforms using the criteria "Series + Pitch + Number of Circuits," and confirm with Engineering that the matching part numbers are correct.

Annotation Guidelines (What to Include in Schematics, PCBs, Assembly Drawings, and BOMs)

Proper assembly documentation can significantly reduce production errors. The table below outlines the required annotations and common errors for schematics, PCB layouts, assembly drawings, and BOMs. It is recommended to follow these guidelines during the design phase.

Proper assembly documentation can significantly reduce production errors. The following outlines the annotation requirements for each section:

Document Type Required Annotations Errors to Avoid
Schematic Connector symbols, part numbers (J1, CN1), pin definitions (pin 1 labels), rated current/voltage, Notes Do not write only "CONN" without specifying the model number or pairing information
PCB Layout Part numbers, Pin 1 markers (dot/triangle/silkscreen arrow), outline (recommended to draw the connector body outline using top-layer silkscreen) Ambiguous pin 1 location, leading to incorrect orientation
Assembly Drawing Connector orientation diagram, mating direction arrows, critical dimensions (e.g., distance from board edge), latch orientation No orientation indicators, resulting in manual insertion errors
BOM (Bill of Materials) Manufacturer, Series, Pitch, Number of Circuits, Mounting Method, Orientation, Mating Part Number, Alternative Part Number Only states "2.54 mm pin header," lacking orientation/latch information

Special Note --- Through-Hole Connector Solder Side Silkscreen:

  • Acceptable: Pin number, pin 1 marker, polarity symbol (+/-), function description ("PWR_IN").
  • Do not: Place silk screen printing over pads (causing cold solder joints), place it in the wave soldering area (may be obscured by solder), or use font sizes that are too large, obstructing visibility during repair.
  • Recommended practice: Place the solder side silkscreen outside the projection of the connector body, using thin outlines and characters.

How to Correctly Describe "Socketed Development Board" (dev board socketed to PCB)

When a daughter board requires a socketed (pluggable) design, the mating relationship should be consistently labeled in the schematic, PCB silkscreen, assembly drawing, and BOM. The following provides specific labeling methods and a reference example:

  • Schematic: Label the sub-board socket as "Female header" and the corresponding socket on the main board as "Male header" and note "Pluggable module".
  • PCB silkscreen: Label "TO SUB BOARD" next to the header pins on the main board, and label "MATES WITH MAIN BOARD J1" next to the female header on the sub-board.
  • Assembly drawing: Use an exploded view or arrows to indicate the direction in which the sub-board is inserted vertically into the main board, and specify the stack height.
  • BOM: List the header pins for the main board (including pin length) and the female header for the sub-board (including height) separately, and note that they form a pair.

Example: "This design adopts a socket-based development board structure: a 2.54 mm dual-row male header (pin length 11mm) is soldered at position U1 on the main board, and a 2.54 mm dual-row female header (height 8.5mm) is soldered at the corresponding position on the daughter board. During assembly, the daughter board is pressed vertically into the main board's header pins to achieve modular, interchangeable functionality".

Distribution Procurement and Alternative Component Evaluation

Once identification is complete and a procurement guide has been created, you can search for and purchase parts through distribution platforms. The following provides search tips, verification methods for part matching, and rules for determining alternative parts:

  • Search Tips: Enter "Manufacturer + Series + Pitch + Number of Circuits + Mounting Method", for example, "JST XH 2.54 mm 2P Through-hole Vertical".
  • Verify compatibility: Confirm that the cable end housing/mating connector is from the same series and that the terminal part number is correct.
  • Determining Replacement Parts: If the original model is out of stock, follow these rules to find pin-to-pin replacements:
    • Pitch, number of rows, number of circuits, mounting method, orientation, locking type, and height should be exactly the same.
    • Connectors from different manufacturers (e.g., Molex and JST) may not be compatible; actual mating tests are required.
    • Prioritize Unikeyic-recommended "direct replacement" or "functionally compatible" models, and request 3D models to compare dimensions.

Common Errors and How to Avoid Them

The table below summarizes five common errors (visual guesswork, incorrect package drawing, incomplete procurement information, reversed assembly orientation, and silkscreen interference) along with their typical manifestations and prevention methods. This can serve as a checklist during design reviews.

Error Type Typical Manifestation Prevention Methods
Guessing Based Solely on Appearance "This looks like a MiniJST." → Purchased JST PH, but it was actually XH Must measure the pitch and verify the series in the datasheet
Incorrect Package Drawing Drawing an SMT connector as a through-hole pad, or an incorrect pin 1 position Download the official footprint, or draw it according to the mechanical drawings
Incomplete procurement information BOM only lists "2.54 mm 2x20 pin header" without orientation or pairing information Use the sourcing guide form to fill in all 9 fields
Assembly orientation is reversed Angled header pins facing the board interior, preventing insertion and removal Include orientation arrows in the assembly documentation
Silkscreen on the solder side interferes Characters printed on the pads cause cold solder joints Follow silkscreen clearance rules; place text outside the component's perimeter

To identify unknown PCB connectors, follow the 6-step measurement method; do not rely on vague names. Use a sourcing guide containing 9 key pieces of information during procurement. For documentation, ensure consistent labeling of part numbers, orientation, and mating relationships across assembly documentation (schematics, PCBs, assembly drawings, and BOMs). Combining these three approaches can completely resolve common errors in identification, packaging, procurement, and assembly.

● How Do You Identify an Unknown PCB Connector and Find a Sourceable Part Number?

First, measure the pitch, then confirm the number of rows, installation orientation (upright/angled), latch mechanism, soldering method (SMT/through-hole), and mating type (male/female, wire-to-wire or board-to-board). Treat generic terms like "MiniJST" only as a rough starting point; never place an order based on them alone. After successful identification, narrow down the specific series, then use the part number system to find a purchasable housing, header, or terminal. Key identification information includes: pitch, number of positions (pins/circuits), top/bottom entry, SMT/through-hole, shrouded/unshrouded (whether it has a shroud), and board thickness or wiring specifications.

Purchasing Checklist

Once the series is confirmed, the purchase order or BOM must include the 10 items listed in the table below (from series/manufacturer to terminal part number). Examples are provided for each item; this table may be copied as an internal template

Checklist Items Items to be confirmed Example
Series/Manufacturer JST, Molex, TE, Hirose, etc. JST XH
Pitch 2.54 mm / 2.00 mm / 1.25 mm, etc. 2.54 mm
Number of positions Total Number of Pins 2-position (2P), 10-position (10P)
Number of rows Single row / Double row Dual row 2x5 = 10P
Mounting Method SMT / Through-hole / Crimp Through-hole
Orientation Upright / Angled Angled 90°
Shrouded Shrouded header or unshrouded Shrouded
Locking Type No lock / Friction lock / Snap lock / TPA Snap-lock
Mating part number Wire End Housing / Mating Connector Part Number XHP-2 (JST XH wire end housing)
Terminal part number (if crimping is required) Terminals for wire harnesses SXH-001T-P0.6

Procurement steps: After completing connector identification, search via distribution platforms such as Unikeyic using the criteria "manufacturer + series + pitch + positions + mounting style", and confirm available models by referencing the datasheet, 3D model, mating part, and inventory information.

Common Sources of Misidentification

The table below lists the 5 most common sources of misidentification (generic term "MiniJST" ignoring the housing, confusion between pin count and row count, through-hole/SMT misidentification, and ignoring top/bottom entry). Each entry includes the correct information and potential consequences; this list can be posted in the lab as a reminder.

Misjudgment Fact Consequence
This looks like a MiniJST; just buy the JST PH series MiniJST is not a standard series; it may correspond to different pitches such as JST ZH, SH, PH, or XH After purchasing, the pitch or latch may not match, rendering it unusable
All header pins are 2.54 mm single-row; just buy any one You haven't distinguished between shrouded headers (with a protective shroud) and unshrouded ones---the shroud heights differ The shroud may interfere or fail to lock into the mating female connector
Only look at the number of positions and ignore the number of rows A dual-row 2x5 and a single-row 1x10 both have 10 pins, but their physical profiles are completely different PCB packaging mismatch; cannot be soldered
Through-hole and SMT connectors cannot be distinguished by appearance alone Some SMT connectors also have longer pins (for alignment) Incorrect pad design causes shifting during reflow soldering
Ignoring top/bottom entry FFC/FPC connectors have top-contact and bottom-contact variants The ribbon cable is inserted upside down, causing poor contact

Special note: "Number of positions" should be described in conjunction with the number of rows (e.g., "dual-row, 20-position") to avoid ambiguity.

Why is "MiniJST" only a vague starting point?

Many engineers assume they can purchase the correct part simply by saying "MiniJST", but in reality, JST has multiple incompatible series. The following lists four common series and their pitch differences, explaining why you cannot rely on generic terms when placing orders.

  • JST XH (2.54 mm pitch, with latch)
  • JST PH (2.00 mm pitch, compact)
  • JST ZH (1.50 mm pitch, even smaller)
  • JST SH (pitch 1.00 mm, ultra-thin)

These series differ in pitch, terminal structure, and locking mechanism; while their housing shapes are similar, they are not interchangeable. Therefore, you cannot place an order based solely on "MiniJST"; you must follow the steps above to measure the pitch and confirm the series before finalizing the part number.

Additional Recommendation: Utilize Multiple Information Sources

In addition to physical measurement, you can look for clues in the body markings, schematic symbols, BOM descriptions, and historical purchase records. The following lists four available information sources and how to use them.

  • Body markings: Use a magnifying glass to look for micro-prints, such as "JST", "Molex", "5264," or "ZH".
  • Schematic symbols: The schematic may include the manufacturer's part number or series.
  • BOM description: Historical BOMs may contain information such as "CONN HEADER 2.54 MM 2POS".
  • Purchase records: Past purchase orders may contain the part number, which can be used to look up the datasheet.

The golden rule for identifying unknown connectors: First, measure the pitch; then count the number of pins; confirm the mounting method, orientation, and presence of a housing; and finally, match the specific series. "MiniJST" is a clue, not the answer---the ZH (1.5mm), SH (1.0mm), PH (2.0mm), and XH (2.54 mm) series differ in pitch, terminal structure, housing latches, and mating geometry, and are generally not interchangeable; when purchasing, you must verify the specific series and part number. Once the series is confirmed, use the bill of materials to identify the part numbers for the three-piece set: housing, header, and terminal.

● How Should You Handle Silkscreen for Through-Hole Connectors and Clearly Show a Dev Board Socketed to a PCB?

The primary purpose of the silkscreen legend is to indicate polarity, orientation, interface number, and assembly readability; it must never cover the pad ring or cause misreading after soldering. For through-hole connectors, the silkscreen on the solder side should only retain the pin 1 marker, polarity symbol, interface number, and necessary test point indicators. When designing a development board socketed to a PCB, the schematic must clearly define the mating interface, and the assembly drawing must specify the stacking height, mating orientation, and the correspondence between the socket and header. Additionally, it is essential to ensure consistency among the silkscreen legend, assembly drawing, BOM, and 3D view to prevent incorrect insertion during assembly or procurement errors.

List of Annotation Rules (Through-Hole Connector Silkscreen Design)

The table below lists seven core rules for through-hole connector silkscreen design, detailing the treatment for both the top and bottom layers. Layout engineers must strictly adhere to this table, particularly the rules regarding "Do not cover pads" and "Pin 1 marker".

Rule Top Layer (Component Side) Bottom Layer (Solder Side) Description
1. Do not cover pads Silkscreen lines, characters, and arrows must not extend into the inner ring of the pad Covering pads is also prohibited, as it will affect soldering Pads must remain exposed; screen-printed ink can cause cold solder joints
2. Pin 1 Marker Should be clearly marked (dot, triangle, or the number "1") Also mark a small dot or "1" next to the corresponding through-hole To facilitate visual inspection and orientation during repair
3. Connector Number Indicate the connector number (J1, CN1, P1) Optional (mark pin numbers if space permits) Prioritize the top layer; use the bottom layer as a supplement
4. Polarity/Direction Indication Diode symbols, plus/minus signs, and arrows to indicate insertion direction Only when necessary (e.g., for asymmetrical connectors) Prevent incorrect insertion (e.g., orientation of pin header latches)
5. Functional descriptions Short text (e.g., "PWR_IN," "USB1") Not recommended (limited space and prone to being obscured) Place function labels on the top layer silkscreen; keep the bottom layer clean
6. Test Point Indicators May be labeled (e.g., "TP1") Suitable for labeling test point numbers Test points on the bottom layer are commonly marked with silk-screen labels
7. Outline Draw the outline of the connector body with a thin line Not necessary (easily confused with solder joints) The outline aids in manual component placement

The core principle of solder-side silkscreen is "minimalism, no interference with soldering, and retention of only critical positioning information." The pin 1 marker is the minimum requirement for the bottom layer silkscreen.

Recommended Marking Comparison Table (Component Side vs. Solder Side)

The table below compares recommendations for various marking types (part numbers, pin 1 markers, polarity indicators, orientation arrows, etc.) on the top and bottom layers of silkscreen. Use this table as a reference when deciding which markings should be placed on the top layer and which on the bottom layer.

Marking Type Top Layer (Component Side) Recommendations Bottom Layer (Solder Side) Recommendation Example
Reference Required, clear font Optional (when top-side silkscreen is obscured) J1, CN2
Pin 1 marker Dot/Triangle/Number Circle or "1" ● or 1
Polarity Mark Plus and minus signs, diode bar Only when the connector is asymmetrical + / -
Directional arrows Indicates insertion direction Generally not required →
Function text Short phrase Avoid "USB", "LCD"
Border Dotted or thin solid lines Do not draw ═════
No Wiring Zone Indicated by a diagonal fill If necessary ▒▒▒

When the connector body is large or close to the board edge, the bottom layer silkscreen may be obscured by the wave soldering fixture; therefore, critical information (such as the pin 1 marker) should be placed on both the top and bottom layers.

Assembly Drawing Element List (for dev board socketed to PCB)

When designing a pluggable daughter card, the assembly drawing must include the 7 elements listed in the table below (pairing relationships, orientation indicators, stack height, connector mating height, anti-misinsertion features, assembly sequence, and 3D view references). It is recommended to reserve space for these annotations in the assembly drawing template to ensure that assemblers or users do not install the connector incorrectly or damage it:

Element Required Information Example
Mating Relationship Identifies which socket matches which pin header Insert sub-board SOCKET1 into main board HEADER1
Directional Indicators Arrows or icons indicate the direction in which the daughter board should be inserted Downward arrow + "PUSH"
Stacking height Vertical distance from the bottom of the daughter board to the top of the motherboard STACKING HEIGHT = 8.5mm
Connector clearance Pin length of male header + Depth of female header HEADER pin length 11mm, SOCKET clearance 8.5mm
Anti-misinsertion features Notched corners, latch position, anti-misinsertion protrusions Lock tab orientation marked in red
Assembly sequence Determine whether to solder one side first or insert first and then solder Solder the main board header pins first, then insert the daughter board header sockets
3D view reference Provide an exploded view or isometric view Display the mating relationship with the daughter board raised at a 45° angle

Design Delivery Checklist (Ensure silkscreen matches assembly documentation)

Before sending the board for production, please review the following checklist item by item, covering top-layer silkscreen, bottom-layer silkscreen, consistency between the assembly drawing and BOM, and 3D views. Check off each item as you complete it to ensure nothing is missed:

Top Layer Silkscreen Check

  • □ All through-hole connector pads are not covered by silkscreen
  • □ Each connector has a clear pin 1 marker (dot or "1")
  • □ Part numbers (Jx, CNx) are clearly legible and not obscured by components
  • □ Polarity/orientation arrows match the assembly drawing

Bottom Layer Silkscreen Inspection

  • □ No silkscreen rings cover the pads on the solder side
  • □ At least the position corresponding to pin 1 has a bottom-layer pin 1 marker
  • □ Bottom-layer silkscreen font height ≤ 1.0 mm to prevent illegibility after wave soldering

Consistency between assembly drawing and BOM

  • □ Stacking height and pairing relationships are specified in the assembly drawing
  • □ Main board connectors and daughter board connectors are listed in pairs in the BOM, and their part numbers match
  • □ The orientation arrows in the assembly drawing match those in the top-layer silkscreen

3D View Verification

  • □ The connector stacking height in the 3D model matches the drawing, with no interference
  • □ After inserting the daughter board, there is no component collision between the main board and the daughter board

Common Errors vs. Best Practices

The table below summarizes five common errors in silkscreen and assembly documentation (silkscreen over solder pads, missing pin 1 marker on the bottom layer, missing stacking height in the assembly drawing, missing component pair annotations in the schematic, and inconsistent part numbers), along with the correct practices. This table can be used to identify issues during design reviews.

Incorrect Practice Consequences Correct Practice
Silkscreen text overlaps through-hole pads Solder cannot reach the pad, resulting in cold solder joints Screen print is ≥0.2 mm from the pad edge
No pin 1 marker on the bottom layer Direction cannot be determined during repair or rework; the component may be installed upside down Add a dot or "1" next to the through-hole on the bottom layer
The assembly drawing shows only the outline, without the stacking height The wrong pin length was purchased, resulting in a sub-board height mismatch Clearly specify pin header lengths and stacking heights
Connectors in the schematic are not labeled as paired Engineers forgot to select paired components, resulting in a missing half of the BOM Indicate mating relationships using text or graphics
Silkscreen part numbers do not match assembly drawing part numbers The worker looks for J1 on the assembly drawing, but the silkscreen on the board shows CN1 Standardize part numbering conventions

Complete Example of a Modular Development Board (Text description for reference)

The following is a complete example of a development board with a socketed design (main board + pluggable sensor sub-board), demonstrating the specific notation for top-layer silkscreen, bottom-layer silkscreen, assembly drawings, and the BOM. You can directly reference this example and modify it for your project.

Scenario: Design a main board that requires a pluggable sensor sub-board, with the sub-board stacked vertically on top of the main board.

  • Top Layer Silkscreen:
    • Label the header pins on the main board as "J1 -- 2.54 mm HEADER (MALE)"; a dot indicates pin 1, and an arrow "↑" indicates the insertion direction of the sub-board.
    • Next to the sub-board's female connector, label "SOCKET1 -- MATES WITH J1"; a dot indicates pin 1, and an arrow "↓" indicates the insertion direction.
  • Bottom-layer silkscreen:
    • The back side corresponds to the through-holes of the main board's pin header; no silkscreen is printed next to each through-hole (to prevent contamination during wave soldering), but a small white dot is added on the back side at the pin 1 position.
  • Assembly drawing:
    • Draw two views---the front view should be annotated with stacking height = 10 mm; the isometric view should use dashed lines to show the sub-board in the raised position, with the text "Sub-board inserted vertically into J1". Also include a table: HEADER pin length 11 mm, SOCKET mating height 8.5mm, total height = 11 - 8.5 + board thickness difference ≈ 10 mm.
  • BOM:
    • Main Board: HEADER, 2.54 mm dual-row 2x10, through-hole vertical, pin length 11 mm, unshielded, compatible with JST series.
    • Daughter Board: SOCKET, 2.54 mm dual-row 2x10, through-hole vertical, with 8.50 mm height, round-hole female socket.

Summary:

  • The core of the silkscreen legend is to avoid covering pads, clearly mark the pin 1 marker, ensure legibility, and keep the bottom-layer silkscreen minimal.
  • The Pin 1 marker must appear on both the top and bottom layers; it serves as the final safeguard against incorrect orientation.
  • The assembly drawing must include mating relationships, stacking height, and orientation indicators, and should be consistent with the BOM and 3D views.
  • By using the Design Delivery Checklist ( ), discrepancies between the silkscreen and assembly documentation can be identified before the board is sent to production, significantly reducing the error rate.
Unikeyic Electronics
Unikeyic Electronics
UNIKEYIC is a global electronic components distributor providing component sourcing, BOM support, and supply chain solutions. With a broad catalog of semiconductors, connectors, and passive components, it helps engineers and buyers source genuine parts efficiently.
Prev:  JST Connector Types Explained How to Identify PH, XH, SH, GH, VH, and SM and Choose the Right Series
Next:  Unikeyic Electronics Ranked No. 19 on Supply Chain Connect’s 2026 Top 50 Global Electronics Distributors List
Would you like more details or pricing on the components mentioned above? Please complete the form below.
Submit Inquiry / Request Info