Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Conn Shrouded Header HDR 30 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
24,500
Factory Lead Time:18-22 weeks
26+
2,450+$0.393
7,350+$0.3865
12,250+$0.3766
- +
Ext. Price(USD):$962.85
MOQ:2,450
Mult:2,450
SPQ:2,450
Minitek PWR 4.2 Wire-to-Board Connector, Dual Row Header
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$1.9203
- +
Ext. Price(USD):$4,839.15
MOQ:2,520
Mult:2,520
SPQ:1,260
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.6389
- +
Ext. Price(USD):$766.68
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.4241
- +
Ext. Price(USD):$897.18
MOQ:630
Mult:630
SPQ:210
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Vertical SMT Tails And Hold Down 15 Gold Plating Black Color 8 Positions Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:13 weeks
6,000+$1.8158
- +
Ext. Price(USD):$10,894.80
MOQ:6,000
Mult:6,000
SPQ:1,200
Pre-order
135,000
Factory Lead Time:22-26 weeks
1,350+$4.4625
5,400+$4.175
10,350+$3.925
- +
Ext. Price(USD):$6,024.37
MOQ:1,350
Mult:1,350
SPQ:1,350
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7486
- +
Ext. Price(USD):$1,347.48
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1379
- +
Ext. Price(USD):$2,886.16
MOQ:1,350
Mult:1,350
SPQ:450
PIN HEADER, 72POS, 2ROW, 2.54MM, THT;
Available Stock
19
Estimated Ship Time:6-12 working days
1+$7.7236
10+$6.7968
500+$6.6732
1,000+$6.6732
- +
Ext. Price(USD):$30.89
MOQ:4
Mult:1
Available Stock
63
Estimated Ship Time:3-5 working days
23+
1+$6.3751
120+$5.9554
240+$5.6384
- +
Ext. Price(USD):$6.37
MOQ:1
Mult:1
SPQ:120
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.648
- +
Ext. Price(USD):$3,574.80
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
3,000,000
Factory Lead Time:22-26 weeks
30,000+$0.3525
50,000+$0.34
100,000+$0.3275
250,000+$0.2988
500,000+$0.2663
- +
Ext. Price(USD):$10,575.00
MOQ:30,000
Mult:30,000
SPQ:30,000
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.921
- +
Ext. Price(USD):$1,381.50
MOQ:1,500
Mult:1,500
SPQ:500
JST 2.0mm Pitch 6-Pin Single Row Header, Wire-to-Board Connector, PA Series, Right Angle, Surface Mount
Available Stock
695
Estimated Ship Time:5-9 working days
22+
5+$1.0978
15+$0.8675
30+$0.8529
- +
Ext. Price(USD):$5.48
MOQ:5
Mult:1
SPQ:1,000
Conn Board to Board HDR 6 POS 2.2mm Solder RA TH Box
Available Stock
340
Estimated Ship Time:14-17 working days
10+$4.5854
30+$4.0196
200+$3.228
300+$3.2163
- +
Ext. Price(USD):$50.43
MOQ:11
Mult:1
SPQ:1
JST
ECAD Model:
Unshrouded Header, HDR, 3 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole
Available Stock
3,399
Estimated Ship Time:5-9 working days
22+
10+$0.3584
50+$0.2747
150+$0.2701
- +
Ext. Price(USD):$3.58
MOQ:10
Mult:5
SPQ:2,000
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.984
- +
Ext. Price(USD):$4,476.00
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
IDC Connector F 6 POS 2mm IDT RA Cable Mount Box
Pre-order
360,000
Factory Lead Time:18-22 weeks
26+
36,000+$0.1856
108,000+$0.1825
180,000+$0.1779
- +
Ext. Price(USD):$6,681.60
MOQ:36,000
Mult:36,000
SPQ:36,000
Wire-to-Board HDR 20 Pos 3mm Solder Straight Top Entry TH Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$2.2876
- +
Ext. Price(USD):$3,397.08
MOQ:1,485
Mult:1,485
SPQ:495
Pre-order
1,300
Factory Lead Time:22-26 weeks
13+$32.875
25+$27.65
50+$23.225
1,000+$16.7125
10,000+$13.45
- +
Ext. Price(USD):$427.37
MOQ:13
Mult:13
SPQ:13
Micro Stack HDR Assembly
Pre-order
27,000
Factory Lead Time:22-26 weeks
270+$4.2875
500+$2.95
10,000+$2.1
25,000+$2.0375
- +
Ext. Price(USD):$1,157.62
MOQ:270
Mult:270
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$1.0376
- +
Ext. Price(USD):$2,490.24
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 12 Pos 4.2mm Solder ST Top Entry TH Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$4.8346
- +
Ext. Price(USD):$7,832.05
MOQ:1,620
Mult:1,620
SPQ:540
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder Straight Thru-Hole Tube
Pre-order
264,000
Factory Lead Time:22-26 weeks
2,640+$0.95
5,280+$0.9
- +
Ext. Price(USD):$2,508.00
MOQ:2,640
Mult:2,640
SPQ:2,640
Wire-to-Board Connector HDR/SKT, 6 POS, 4mm Pitch, Solder RA Side Entry, SMD, Tape
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$2.6875
50,000+$2.15
100,000+$2.0625
250,000+$1.95
- +
Ext. Price(USD):$32,250.00
MOQ:12,000
Mult:12,000
25 / PageGoto