Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9854
- +
Ext. Price(USD):$1,330.29
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$5.4891
- +
Ext. Price(USD):$6,669.25
MOQ:1,215
Mult:405
SPQ:405
Pre-order
120,000
Factory Lead Time:25-42 weeks
1,200+$0.518
- +
Ext. Price(USD):$621.60
MOQ:1,200
Mult:150
SPQ:150
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 12 Pos 2mm Solder ST Top Entry Thru-Hole
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.3601
27,000+$0.3541
45,000+$0.3451
- +
Ext. Price(USD):$3,240.90
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3423
- +
Ext. Price(USD):$1,208.07
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Socket Strip RCP 44 POS 2.54mm Solder ST Thru-Hole
Pre-order
125,000
Factory Lead Time:22-26 weeks
1,250+$5.4
- +
Ext. Price(USD):$6,750.00
MOQ:1,250
Mult:1,250
SPQ:1,250
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8026
- +
Ext. Price(USD):$1,203.90
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
KK 100 Header Assembly, Friction Lock, Solid Body
Pre-order
71,300
Factory Lead Time:22-26 weeks
713+$0.7
2,850+$0.6625
- +
Ext. Price(USD):$499.10
MOQ:713
Mult:713
SPQ:713
JST
ECAD Model:
Conn Unshrouded Header HDR 25 POS 2.5mm Solder ST Thru-Hole Reel
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.6713
13,500+$0.6601
22,500+$0.6433
- +
Ext. Price(USD):$3,020.85
MOQ:4,500
Mult:4,500
SPQ:4,500
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.6581
- +
Ext. Price(USD):$5,330.61
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.4791
- +
Ext. Price(USD):$3,346.78
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.6859
- +
Ext. Price(USD):$2,314.91
MOQ:3,375
Mult:3,375
SPQ:1,125
Wire-to-Board Connector HDR 10 Pos 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
1,417,500
Factory Lead Time:15 weeks
2,835+$1.2883
- +
Ext. Price(USD):$3,652.33
MOQ:2,835
Mult:2,835
SPQ:945
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.2796
- +
Ext. Price(USD):$806.14
MOQ:630
Mult:630
SPQ:210
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.1978
- +
Ext. Price(USD):$1,617.03
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn IDC Connector F 9 POS 2mm Solder ST Thru-Hole Automotive Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1683
36,000+$0.1655
60,000+$0.1612
- +
Ext. Price(USD):$2,019.60
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.257
- +
Ext. Price(USD):$1,696.95
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9802
- +
Ext. Price(USD):$1,176.24
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5644
- +
Ext. Price(USD):$3,461.94
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Automotive Connector STAC64 RAHDR 2BAY 40CKT 20A-20B
Available Stock
29
Estimated Ship Time:5-8 working days
25+
1+$3.3056
10+$2.7547
100+$2.3954
448+$2.2387
- +
Ext. Price(USD):$3.30
MOQ:1
Mult:1
SPQ:448
JST
ECAD Model:
Board-to-Board Insulation Displacement Connectors
Available Stock
2,000
Estimated Ship Time:6-7 working days
25+
2,000+$0.0536
- +
Ext. Price(USD):$107.20
MOQ:2,000
Mult:2,000
MICT 260 PLG 114 ASY .025 PDNI
Pre-order
81,000
Factory Lead Time:22-26 weeks
810+$60.35
1,000+$53.475
2,500+$45.8375
5,000+$41.25
10,000+$36.6625
- +
Ext. Price(USD):$48,883.50
MOQ:810
Mult:810
SPQ:810
Conn Unshrouded Header HDR 9 POS 2.5mm Solder ST Thru-Hole
Available Stock
500
Estimated Ship Time:6-7 working days
22+
500+$0.4208
- +
Ext. Price(USD):$210.40
MOQ:500
Mult:500
JST
ECAD Model:
Available Stock
1,040
Estimated Ship Time:4-6 working days
520+$0.2188
- +
Ext. Price(USD):$113.77
MOQ:520
Mult:520
SPQ:520
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.6435
- +
Ext. Price(USD):$2,218.72
MOQ:1,350
Mult:1,350
SPQ:450
25 / PageGoto