Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3649
- +
Ext. Price(USD):$1,228.41
MOQ:900
Mult:450
SPQ:450
Conn Shrouded Header HDR 20 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
90
Estimated Ship Time:14-17 working days
10+$3.7798
30+$3.1948
200+$2.623
300+$2.6096
- +
Ext. Price(USD):$52.91
MOQ:14
Mult:1
SPQ:1
JST
ECAD Model:
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1197
36,000+$0.1177
60,000+$0.1148
- +
Ext. Price(USD):$1,436.40
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.2361
- +
Ext. Price(USD):$778.74
MOQ:630
Mult:630
SPQ:210
Conn Unshrouded Header HDR 12 POS 2.54mm Solder ST Top Entry SMD BergStik® T/R
Pre-order
6,000
Factory Lead Time:10-16 weeks
24+
600+$0.64
900+$0.6233
- +
Ext. Price(USD):$384.00
MOQ:600
Mult:300
SPQ:300
Conn Shrouded Header HDR 15 POS 2mm Solder RA SMD
Available Stock
590
Estimated Ship Time:6-7 working days
20+$0.3596
- +
Ext. Price(USD):$7.19
MOQ:20
Mult:20
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6285
- +
Ext. Price(USD):$1,131.30
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Wire Connector HDR 25 Pos 1mm IDT ST Cable Mount Box
Available Stock
985
Estimated Ship Time:6-7 working days
22+
20+$0.7448
100+$0.3866
- +
Ext. Price(USD):$14.89
MOQ:20
Mult:20
Molex
ECAD Model:
Wire-to-Board Connector, 10 Pos, 0.5mm Pitch, Solder RA, SMD, Embossed T/R
Available Stock
50
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Ejector Header HDR 34 Pos 2.54mm Solder RA Thru-Hole
Available Stock
1,209
Estimated Ship Time:6-12 working days
10+$1.1872
100+$1.166
500+$1.166
1,000+$1.1448
2,500+$1.1448
- +
Ext. Price(USD):$24.93
MOQ:21
Mult:1
Minitek Reg Pwr 3.0 Bmi Header Wire To Board Connector Dual Row Vertical TH 15 Gold Plating 6 Pos Black LCP Non-Glow Kink Tails Compatible
Pre-order
2,300,000
Factory Lead Time:15 weeks
4,600+$1.2273
- +
Ext. Price(USD):$5,645.58
MOQ:4,600
Mult:2,300
SPQ:2,300
JST
ECAD Model:
Conn Board to Board PL 24 POS 0.5mm Solder RA Side Entry SMD T/R
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.6365
36,000+$0.6258
60,000+$0.61
- +
Ext. Price(USD):$7,638.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.8965
- +
Ext. Price(USD):$1,613.70
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 1.5mm Solder ST SMD T/R
Pre-order
400,000
Factory Lead Time:22-26 weeks
4,000+$0.4375
8,000+$0.3875
- +
Ext. Price(USD):$1,750.00
MOQ:4,000
Mult:4,000
SPQ:4,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3586
- +
Ext. Price(USD):$1,075.80
MOQ:3,000
Mult:1,500
SPQ:500
Molex
ECAD Model:
Pre-order
89,600
Factory Lead Time:22-26 weeks
896+$2.925
2,000+$2.5625
5,000+$2.5
- +
Ext. Price(USD):$2,620.80
MOQ:896
Mult:896
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$1.4658
- +
Ext. Price(USD):$3,561.89
MOQ:2,430
Mult:810
SPQ:810
2.0mm Pitch HPI Vertical Post Headers
Available Stock
34,650
Estimated Ship Time:6-7 working days
21+
550+$0.0169
- +
Ext. Price(USD):$9.29
MOQ:550
Mult:550
Wire-to-Board Header, 18 Pos, 4.2mm Pitch, Solder RA Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.1856
- +
Ext. Price(USD):$1,600.56
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Wire to Board HDR 28 Pos 1.25mm Solder ST Top Entry SMD T/R
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.8
4,000+$1.575
10,000+$1.55
- +
Ext. Price(USD):$2,700.00
MOQ:1,500
Mult:1,500
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.477
- +
Ext. Price(USD):$715.50
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6302
- +
Ext. Price(USD):$945.30
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9888
- +
Ext. Price(USD):$1,334.88
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Board to Board Connector RCP 120 Pos 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.9997
30+$0.9829
50+$0.9485
- +
Ext. Price(USD):$9.99
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 5.08mm Solder RA Thru-Hole Box
Available Stock
80
Estimated Ship Time:4-6 working days
80+$3.4251
- +
Ext. Price(USD):$274.00
MOQ:80
Mult:80
SPQ:80
25 / PageGoto