Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Socket Strip SKT 42 POS 2mm Solder RA Thru-Hole Tube
Pre-order
1,400
Factory Lead Time:22-26 weeks
14+$10.45
112+$6.8
1,008+$5.2375
5,012+$4.1875
10,010+$3.6625
- +
Ext. Price(USD):$146.30
MOQ:14
Mult:14
SPQ:14
Pre-order
220,000
Factory Lead Time:22-26 weeks
2,200+$4.0125
5,005+$3.7375
10,010+$3.525
- +
Ext. Price(USD):$8,827.50
MOQ:2,200
Mult:2,200
SPQ:2,200
JST
ECAD Model:
Conn Headers and PCB Receptacles
Available Stock
300
Estimated Ship Time:6-7 working days
22+
300+$0.1583
- +
Ext. Price(USD):$47.49
MOQ:300
Mult:300
Molex
ECAD Model:
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$1.2883
- +
Ext. Price(USD):$1,043.52
MOQ:810
Mult:810
SPQ:405
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0202
- +
Ext. Price(USD):$1,224.24
MOQ:1,200
Mult:1,200
SPQ:400
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 2POS, TH; Gender:Header; Pitch Spacing:5mm; No. of Positions:2Ways; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Right Angle; Product Range:-; SVHC:No SVHC (15-Jan-2019);
Available Stock
124
Estimated Ship Time:6-12 working days
50+$0.3165
150+$0.3038
2,500+$0.2734
5,000+$0.2734
- +
Ext. Price(USD):$25.32
MOQ:80
Mult:5
Conn Shrouded Header (4 Sides) HDR 3 POS 1mm Solder ST Top Entry SMD T/R
Available Stock
1,300
Estimated Ship Time:14-17 working days
300+$0.1534
500+$0.1425
10,000+$0.104
30,000+$0.1028
- +
Ext. Price(USD):$50.00
MOQ:326
Mult:1
SPQ:1
Available Stock
2
Estimated Ship Time:7-12 working days
1+$158.8555
10+$125.5423
25+$112.7904
- +
Ext. Price(USD):$317.71
MOQ:2
Mult:1
SPQ:1
JST
ECAD Model:
Shrouded Header, 7 Pos, 2.5mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
1,000
Estimated Ship Time:14-17 working days
10+$2.4386
30+$1.8495
500+$1.342
1,000+$1.335
- +
Ext. Price(USD):$51.21
MOQ:21
Mult:1
SPQ:1
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Gold Flash Plating Black 20 Pos Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$2.0265
- +
Ext. Price(USD):$12,159.00
MOQ:6,000
Mult:6,000
SPQ:600
Wire-to-Board Connector HDR 4 Pos 4.2mm Solder Right Angle Side Entry TH Tray
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.4422
- +
Ext. Price(USD):$1,591.92
MOQ:3,600
Mult:3,600
SPQ:1,200
Pluggable Terminal Block Header, 5.08mm Pitch, Open End, Right Angle
Available Stock
172
Estimated Ship Time:6-12 working days
1+$0.8539
250+$0.8387
500+$0.8387
1,000+$0.8234
5,000+$0.8234
- +
Ext. Price(USD):$24.76
MOQ:29
Mult:1
Straight Receptacle 50-Pin
Available Stock
28
Estimated Ship Time:14-17 working days
1+$2.3537
30+$1.7974
1,000+$1.2407
2,000+$1.2362
- +
Ext. Price(USD):$51.78
MOQ:22
Mult:1
SPQ:1
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.8582
- +
Ext. Price(USD):$2,317.14
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3573
- +
Ext. Price(USD):$3,182.35
MOQ:1,350
Mult:1,350
SPQ:450
Conn Board to Board RCP 13 POS 2.5mm Solder ST Thru-Hole
Available Stock
1,000
Estimated Ship Time:14-17 working days
100+$0.4398
300+$0.385
4,000+$0.3065
5,000+$0.3065
- +
Ext. Price(USD):$50.13
MOQ:114
Mult:1
SPQ:1
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$8.2834
- +
Ext. Price(USD):$5,218.54
MOQ:630
Mult:315
SPQ:315
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical SMD 0.75μm Gold Au Plating with Peg Pick and Place Cap 44 Circuits Glow Wire Tube
Pre-order
539,000
Factory Lead Time:22-26 weeks
5,390+$4.2
- +
Ext. Price(USD):$22,638.00
MOQ:5,390
Mult:5,390
SPQ:5,390
micro strip, 2x5pos., pitch 1,27mm, vertical, p&p pad, SMD
Available Stock
7,200
Estimated Ship Time:8-16 working days
600+$0.8582
1,200+$0.8011
1,800+$0.7739
3,600+$0.7468
6,600+$0.7199
- +
Ext. Price(USD):$514.92
MOQ:600
Mult:600
SPQ:600
Wire-to-Board Connector Header, 20 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
315,000
Factory Lead Time:15 weeks
630+$6.6573
- +
Ext. Price(USD):$4,194.09
MOQ:630
Mult:630
SPQ:210
Conn Shrouded Header HDR 7 POS 2mm Solder RA SMD T/R
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1
5,000+$0.85
500,000+$0.475
750,000+$0.4375
- +
Ext. Price(USD):$1,500.00
MOQ:1,500
Mult:1,500
Truck Bus and Off-Road Headers
Pre-order
28,900
Factory Lead Time:22-26 weeks
289+$1.3875
561+$1.1625
1,122+$0.975
- +
Ext. Price(USD):$400.98
MOQ:289
Mult:289
SPQ:289
Molex
ECAD Model:
Pre-order
288,000
Factory Lead Time:22-26 weeks
2,880+$2.225
- +
Ext. Price(USD):$6,408.00
MOQ:2,880
Mult:2,880
SPQ:2,880
Conn Board to Board HDR 32 POS 1.5mm Solder ST SMD T/R
Available Stock
518
Estimated Ship Time:14-17 working days
50+$0.9494
100+$0.8014
2,000+$0.6452
4,000+$0.6441
- +
Ext. Price(USD):$50.31
MOQ:53
Mult:1
SPQ:1
25 / PageGoto