Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$3.1285
- +
Ext. Price(USD):$3,941.91
MOQ:1,260
Mult:1,260
SPQ:420
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Pre-order
72,000
Factory Lead Time:18-22 weeks
26+
7,200+$0.258
21,600+$0.2536
36,000+$0.2473
- +
Ext. Price(USD):$1,857.60
MOQ:7,200
Mult:7,200
SPQ:7,200
Wire-to-Board Connector HDR 12POS 2mm RATHRU
Pre-order
1,080,000
Factory Lead Time:12 weeks
2,160+$1.0428
- +
Ext. Price(USD):$2,252.44
MOQ:2,160
Mult:2,160
SPQ:2,160
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 5.1mm Solder RA SMD T/R
Pre-order
75,000
Factory Lead Time:18-22 weeks
26+
7,500+$0.3877
22,500+$0.3812
37,500+$0.3716
- +
Ext. Price(USD):$2,907.75
MOQ:7,500
Mult:7,500
SPQ:7,500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 72 POS 2.54mm Solder RA Thru-Hole Stac64 Tray
Pre-order
16,800
Factory Lead Time:22-26 weeks
168+$11.2875
336+$10.8625
500+$9.05
1,000+$7.5375
2,500+$6.5625
- +
Ext. Price(USD):$1,896.30
MOQ:168
Mult:168
SPQ:168
Pre-order
144,000
Factory Lead Time:22-26 weeks
1,440+$3.8
5,004+$3.5375
10,008+$3.3375
- +
Ext. Price(USD):$5,472.00
MOQ:1,440
Mult:1,440
SPQ:1,440
JST
ECAD Model:
Conn Shrouded Header HDR 11 POS 1.5mm Solder ST SMD T/R
Available Stock
1,000
Estimated Ship Time:4-6 working days
1,000+$0.3118
- +
Ext. Price(USD):$311.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH
Pre-order
2,767,500
Factory Lead Time:15 weeks
5,535+$0.5501
- +
Ext. Price(USD):$3,044.80
MOQ:5,535
Mult:5,535
SPQ:1,845
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides), HDR, 3-Pos, 7.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
1,207
Estimated Ship Time:6-12 working days
10+$0.745
100+$0.6675
1,000+$0.6437
2,500+$0.6437
- +
Ext. Price(USD):$29.80
MOQ:40
Mult:10
Conn Unshrouded Header M 72 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
579
Estimated Ship Time:6-12 working days
1+$7.4569
10+$6.5621
500+$6.4427
1,000+$6.4427
- +
Ext. Price(USD):$29.82
MOQ:4
Mult:1
JST
ECAD Model:
Conn Ejector Header HDR 34 POS 2.54mm Solder ST Thru-Hole Box
Available Stock
50
Estimated Ship Time:4-6 working days
25+$1.3527
- +
Ext. Price(USD):$33.81
MOQ:25
Mult:25
SPQ:25
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 2.00μm Tin Plating No Peg 3.60mm Tail Length No Pick & Place Cap 48 Circuits Glow Wire Tube
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$1.7625
- +
Ext. Price(USD):$7,931.25
MOQ:4,500
Mult:4,500
SPQ:4,500
PIN HEADER, 36POS, 1ROW, 2.54MM, THT;
Available Stock
47
Estimated Ship Time:6-12 working days
1+$5.4563
10+$4.8015
500+$4.7142
1,000+$4.7142
- +
Ext. Price(USD):$27.28
MOQ:5
Mult:1
JST
ECAD Model:
Wire-to-Board HDR, Straight, Through-Hole
Pre-order
126,000
Factory Lead Time:18-22 weeks
26+
12,600+$0.0997
37,800+$0.0981
63,000+$0.0956
- +
Ext. Price(USD):$1,256.22
MOQ:12,600
Mult:12,600
SPQ:12,600
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 3POS, TH; Gender:Header; Pitch Spacing:3.81mm; No. of Positions:3Ways; Rated Current:12A; Rated Voltage:300V; Block Orientation:Through Hole Right Angle; Product Range:-; SVHC:No SVHC (15-Jan-2019
Available Stock
382
Estimated Ship Time:6-12 working days
50+$0.4777
150+$0.4586
2,500+$0.4128
5,000+$0.4128
- +
Ext. Price(USD):$26.27
MOQ:55
Mult:5
Header & Housing 02P MTA156 HDR ASSY FL/STR SN
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$0.1738
10,000+$0.1638
25,000+$0.1475
50,000+$0.13
- +
Ext. Price(USD):$434.50
MOQ:2,500
Mult:2,500
SPQ:2,500
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8436
- +
Ext. Price(USD):$1,659.24
MOQ:900
Mult:300
SPQ:300
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.722
- +
Ext. Price(USD):$7,849.80
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Wire to Board HDR 4Power POS 2.5mm Solder RA Side Entry TH
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$0.825
4,000+$0.7125
10,000+$0.7
- +
Ext. Price(USD):$1,485.00
MOQ:1,800
Mult:1,800
JST
ECAD Model:
Shrouded Header HDR 8 Pos 5.08mm Solder Right Angle Thru-Hole Box
Pre-order
6,400
Factory Lead Time:18-22 weeks
26+
640+$2.5578
1,920+$2.5152
3,200+$2.4512
- +
Ext. Price(USD):$1,636.99
MOQ:640
Mult:640
SPQ:640
18-Pin, 2mm Connector Header
Pre-order
114,000
Factory Lead Time:22-26 weeks
1,140+$1.9875
2,280+$1.8875
5,320+$1.7625
10,260+$1.6625
- +
Ext. Price(USD):$2,265.75
MOQ:1,140
Mult:1,140
SPQ:1,140
Molex
ECAD Model:
Pre-order
576,000
Factory Lead Time:22-26 weeks
5,760+$2.575
- +
Ext. Price(USD):$14,832.00
MOQ:5,760
Mult:5,760
SPQ:5,760
Conn Unshrouded Header HDR 14 POS 2.5mm Solder ST Thru-Hole
Available Stock
20
Estimated Ship Time:6-7 working days
20+$1.8092
- +
Ext. Price(USD):$36.18
MOQ:20
Mult:20
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$2.3346
- +
Ext. Price(USD):$5,603.04
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR 20 POS 3mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$2.1431
- +
Ext. Price(USD):$3,182.50
MOQ:1,485
Mult:1,485
SPQ:495
25 / PageGoto