Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5484
- +
Ext. Price(USD):$987.12
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.2886
- +
Ext. Price(USD):$11,189.61
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 8 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
350,000
Factory Lead Time:22-26 weeks
3,500+$1.375
- +
Ext. Price(USD):$4,812.50
MOQ:3,500
Mult:3,500
SPQ:3,500
Conn Shrouded Header HDR 21 POS 0.5mm Solder ST SMD T/R
Available Stock
3,000
Estimated Ship Time:14-17 working days
1+$1.6152
50+$1.1645
2,000+$0.8204
4,000+$0.8181
- +
Ext. Price(USD):$50.07
MOQ:31
Mult:1
SPQ:1
Conn Unshrouded Header M 8 POS 2.54mm Solder ST Top Entry Thru-Hole Carton
Pre-order
640,000
Factory Lead Time:22-26 weeks
6,400+$0.5375
10,000+$0.4125
50,000+$0.345
100,000+$0.2963
250,000+$0.2763
- +
Ext. Price(USD):$3,440.00
MOQ:6,400
Mult:6,400
SPQ:6,400
Wire-to-Board Connector Receptacle 1 Pos Solder RA Thru-Hole
Available Stock
97
Estimated Ship Time:6-12 working days
1+$7.825
5+$7.825
100+$6.7608
250+$6.7608
- +
Ext. Price(USD):$31.30
MOQ:4
Mult:1
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.975
- +
Ext. Price(USD):$1,316.25
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Shrouded Header HDR 2 Pos 2mm Solder Straight SMD T/R
Available Stock
5,000
Estimated Ship Time:4-6 working days
1,000+$0.1077
- +
Ext. Price(USD):$107.70
MOQ:1,000
Mult:1,000
SPQ:1,000
JST
ECAD Model:
Wire to Board Connector HDR 3POS 3.96mm Solder ST Thru-Hole Box
Available Stock
8,000
Estimated Ship Time:4-6 working days
500+$0.1189
- +
Ext. Price(USD):$59.45
MOQ:500
Mult:500
SPQ:500
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.1166
- +
Ext. Price(USD):$6,907.41
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3701
- +
Ext. Price(USD):$1,233.09
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 10 POS 2mm Solder ST Top Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.0835
27,000+$0.082
45,000+$0.08
- +
Ext. Price(USD):$751.50
MOQ:9,000
Mult:9,000
SPQ:9,000
Conn Unshrouded Header HDR 2 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.2675
50,000+$0.2238
100,000+$0.1938
250,000+$0.1788
- +
Ext. Price(USD):$5,350.00
MOQ:20,000
Mult:20,000
SPQ:20,000
Conn Wire to Board PIN 2 POS 2mm Solder ST Thru-Hole Bag
Pre-order
4,000,000
Factory Lead Time:22-26 weeks
40,000+$0.055
50,000+$0.0488
100,000+$0.0463
500,000+$0.0438
2,000,000+$0.0425
- +
Ext. Price(USD):$2,200.00
MOQ:40,000
Mult:40,000
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails And Hold Down 30 Gold Plating Natural Color 2 Positions Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$1.0358
- +
Ext. Price(USD):$9,322.20
MOQ:9,000
Mult:9,000
SPQ:1,800
CamdenBoss
ECAD Model:
Shrouded Header (4 Sides) HDR 8 Pos 5.08mm Solder ST Thru-Hole
Available Stock
105
Estimated Ship Time:6-12 working days
10+$1.1872
100+$1.166
500+$1.166
1,000+$1.1448
2,500+$1.1448
- +
Ext. Price(USD):$24.93
MOQ:21
Mult:1
Molex
ECAD Model:
IDC Connector F 3 Pos 2.54mm IDT RA Cable Mount KK® Bag
Available Stock
50
Estimated Ship Time:3-5 working days
08+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Header Plug 2.54mm, 10-Pin IDC Board Mount, Vertical
Available Stock
323
Estimated Ship Time:14-17 working days
10+$1.7536
50+$1.0316
1,000+$0.7348
2,000+$0.7313
- +
Ext. Price(USD):$50.85
MOQ:29
Mult:1
SPQ:1
JST JFA J2000 Series 2.5mm Pitch 3-Pin Header, Single Row
Available Stock
363
Estimated Ship Time:6-7 working days
20+$0.9461
- +
Ext. Price(USD):$18.92
MOQ:20
Mult:20
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Right Angle Header, TH
Pre-order
2,000,000
Factory Lead Time:15 weeks
4,000+$1.0236
- +
Ext. Price(USD):$4,094.40
MOQ:4,000
Mult:4,000
SPQ:2,000
Molex
ECAD Model:
IDC Connector F 9 POS 2.54mm IDT ST Cable Mount SL™ Tube
Pre-order
69,000
Factory Lead Time:22-26 weeks
690+$2.5625
1,380+$2.425
- +
Ext. Price(USD):$1,768.12
MOQ:690
Mult:690
SPQ:690
PCB RCPT, 30POS, 2ROW, 2.54MM, THT;
Available Stock
14
Estimated Ship Time:6-12 working days
1+$8.4623
10+$7.8981
250+$7.6161
500+$7.6161
- +
Ext. Price(USD):$25.38
MOQ:3
Mult:1
Molex
ECAD Model:
Pre-order
56,000
Factory Lead Time:22-26 weeks
560+$4.4125
1,120+$4.3375
2,500+$3.7625
5,000+$3.5
- +
Ext. Price(USD):$2,471.00
MOQ:560
Mult:560
SPQ:560
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7207
- +
Ext. Price(USD):$1,081.05
MOQ:1,500
Mult:1,500
SPQ:500
Molex MTA-100 Header Assembly, Friction Lock, Notched, Wire-to-Board
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$1.5375
1,000+$1.45
2,500+$1.3375
5,000+$1.2875
10,000+$1.2375
- +
Ext. Price(USD):$384.37
MOQ:250
Mult:250
SPQ:250
25 / PageGoto