Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn IDC Connector SKT 34 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
700
Estimated Ship Time:6-7 working days
22+
100+$0.8073
- +
Ext. Price(USD):$80.73
MOQ:100
Mult:100
Wire-to-Board HDR 24 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
315,000
Factory Lead Time:15 weeks
630+$8.3199
- +
Ext. Price(USD):$5,241.53
MOQ:630
Mult:630
SPQ:210
Conn Socket Strip SKT 59 POS 2.54mm Solder RA Thru-Hole Tube
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$3.2375
1,000+$2.8875
5,000+$2.0375
10,000+$1.9375
25,000+$1.825
- +
Ext. Price(USD):$1,618.75
MOQ:500
Mult:500
SPQ:500
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
2,018
Estimated Ship Time:6-7 working days
22+
20+$0.0814
1,000+$0.0276
- +
Ext. Price(USD):$1.62
MOQ:20
Mult:20
multicomp
ECAD Model:
Unshrouded Header HDR 4 Pos 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
208
Estimated Ship Time:6-12 working days
100+$0.1213
200+$0.1213
- +
Ext. Price(USD):$24.01
MOQ:198
Mult:1
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.9689
- +
Ext. Price(USD):$6,272.01
MOQ:900
Mult:900
SPQ:300
Wire to Board HDR 6 POS 3mm Solder ST Top Entry Thru-Hole Tray
Pre-order
2,092,500
Factory Lead Time:15 weeks
4,185+$0.6512
- +
Ext. Price(USD):$2,725.27
MOQ:4,185
Mult:4,185
SPQ:1,395
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
472,500
Factory Lead Time:15 weeks
945+$8.5602
- +
Ext. Price(USD):$8,089.38
MOQ:945
Mult:945
SPQ:315
Minitek Reg Pwr 3.0 Wire-to-Board Connector Header Dual Row Vertical SMT Tails Hold Down Gold Flash Black 6 Pos Non-Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$1.0219
- +
Ext. Price(USD):$6,131.40
MOQ:6,000
Mult:6,000
SPQ:1,000
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.4958
- +
Ext. Price(USD):$7,646.22
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 12 Pos 4.2mm Solder ST Top Entry TH Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$5.3638
- +
Ext. Price(USD):$8,689.35
MOQ:1,620
Mult:1,620
SPQ:540
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 15 POS 2mm Solder ST Top Entry Thru-Hole Box
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.1455
13,500+$0.1431
22,500+$0.1394
- +
Ext. Price(USD):$654.75
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3858
- +
Ext. Price(USD):$1,247.22
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.6521
- +
Ext. Price(USD):$1,040.82
MOQ:630
Mult:630
SPQ:315
Board to Board Connector, PL, 80 POS, 0.5mm, Solder, ST Top Entry, SMD, Reel
Available Stock
25
Estimated Ship Time:7-12 working days
10+$13.9382
25+$13.2462
50+$12.4554
- +
Ext. Price(USD):$250.88
MOQ:18
Mult:1
SPQ:1
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8461
- +
Ext. Price(USD):$1,142.23
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.3074
- +
Ext. Price(USD):$5,676.66
MOQ:900
Mult:900
SPQ:300
Conn Shrouded Header HDR 26 POS 1.27mm Solder ST Top Entry SMD Reel
Available Stock
1,686
Estimated Ship Time:7-12 working days
50+$2.2736
- +
Ext. Price(USD):$241.00
MOQ:106
Mult:1
SPQ:1
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.7851
- +
Ext. Price(USD):$1,201.20
MOQ:1,530
Mult:1,530
SPQ:765
Molex
ECAD Model:
Header and Housing, 3CKT, VERT HDR, TH
Available Stock
10
Estimated Ship Time:3-5 working days
06+
10+$0.4346
50+$0.4273
100+$0.4122
- +
Ext. Price(USD):$4.34
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2099
- +
Ext. Price(USD):$1,088.91
MOQ:900
Mult:300
SPQ:300
Molex
ECAD Model:
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.6125
2,000+$0.525
- +
Ext. Price(USD):$612.50
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
Wire-to-Board Connector HDR, 12 Pos, 1.25mm, Solder, ST, Top Entry, SMD, T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.3625
8,000+$1.1875
20,000+$1.1625
- +
Ext. Price(USD):$4,087.50
MOQ:3,000
Mult:3,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 42 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$2.9625
- +
Ext. Price(USD):$14,931.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire to Board Connector HDR 4 Pos 3.96mm Solder Straight Top Entry Thru-Hole Box
Available Stock
8,740
Estimated Ship Time:6-7 working days
23+
20+$0.3523
250+$0.1088
- +
Ext. Price(USD):$7.04
MOQ:20
Mult:20
25 / PageGoto