Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header HDR 26 POS 2.54mm Solder ST Thru-Hole
Pre-order
1,000,000
Factory Lead Time:22-26 weeks
10,000+$3.4625
- +
Ext. Price(USD):$34,625.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Molex
ECAD Model:
Conn Board to Board PL 20 POS 0.5mm Solder ST SMD SlimStack™ T/R
Available Stock
43
Estimated Ship Time:3-5 working days
15+
10+$0.5
50+$0.4867
100+$0.4696
- +
Ext. Price(USD):$5.00
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 2 POS, 5mm Pitch, Solder, ST, TH, Bag
Pre-order
2,500,000
Factory Lead Time:22-26 weeks
25,000+$0.425
50,000+$0.375
100,000+$0.36
250,000+$0.3563
500,000+$0.3425
- +
Ext. Price(USD):$10,625.00
MOQ:25,000
Mult:25,000
SPQ:25,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$0.9174
- +
Ext. Price(USD):$990.79
MOQ:1,080
Mult:1,080
SPQ:360
Wire-to-Board Connector HDR 2 Pos 3mm Solder Top Entry Thru-Hole
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.4927
- +
Ext. Price(USD):$3,990.87
MOQ:8,100
Mult:8,100
SPQ:2,700
JST
ECAD Model:
Connector Headers and PCB Receptacles, 1.27mm Pitch
Available Stock
141
Estimated Ship Time:14-17 working days
1+$14.7686
10+$8.0988
2,000+$5.8365
4,000+$5.824
- +
Ext. Price(USD):$59.07
MOQ:4
Mult:1
SPQ:1
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3335
- +
Ext. Price(USD):$1,200.15
MOQ:900
Mult:900
SPQ:300
Headers and PCB Receptacles Connector
Pre-order
10,000
Factory Lead Time:16-18 weeks
1,000+$0.4711
- +
Ext. Price(USD):$471.10
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
Wire-to-Board Connector, Plug, 2 Power Positions, 7.5mm Pitch, Press Fit, Right Angle, Thru-Hole
Pre-order
71,400
Factory Lead Time:22-26 weeks
714+$8.65
1,600+$7.5625
4,000+$7.4125
- +
Ext. Price(USD):$6,176.10
MOQ:714
Mult:714
JST
ECAD Model:
SDN Connector Board-In Crimp Style Connectors
Available Stock
4,857
Estimated Ship Time:6-7 working days
22+
20+$0.099
500+$0.0418
- +
Ext. Price(USD):$1.98
MOQ:20
Mult:20
Connector 2.0mm Pitch Disconnectable Crimp Style
Available Stock
808
Estimated Ship Time:6-12 working days
10+$1.5644
100+$1.5365
250+$1.5365
500+$1.5085
1,000+$1.5085
- +
Ext. Price(USD):$25.03
MOQ:16
Mult:1
JST
ECAD Model:
IDC Connector RCP 6 POS 2.5mm IDT RA Cable Mount Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.1952
18,000+$0.1919
30,000+$0.1871
- +
Ext. Price(USD):$1,171.20
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board Connector, 2.0mm Pitch
Available Stock
100
Estimated Ship Time:14-17 working days
10+$1.9317
50+$1.2357
2,000+$0.8825
4,000+$0.8791
- +
Ext. Price(USD):$50.22
MOQ:26
Mult:1
SPQ:1
Wire-to-Board HDR, 18 Pos, 4.2mm Pitch, Solder, ST Top Entry, TH, Tray
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$7.7036
- +
Ext. Price(USD):$8,319.88
MOQ:1,080
Mult:360
SPQ:360
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.0292
- +
Ext. Price(USD):$4,089.42
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.2925
- +
Ext. Price(USD):$731.25
MOQ:2,500
Mult:500
SPQ:500
JST
ECAD Model:
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
13,000
Estimated Ship Time:4-6 working days
1,000+$0.0238
- +
Ext. Price(USD):$23.80
MOQ:1,000
Mult:1,000
SPQ:1,000
Minitek Power Header, 5.7mm Pitch
Pre-order
1,056,000
Factory Lead Time:15 weeks
2,112+$4.0111
- +
Ext. Price(USD):$8,471.44
MOQ:2,112
Mult:1,056
SPQ:1,056
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4701
- +
Ext. Price(USD):$705.15
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3265
- +
Ext. Price(USD):$1,193.85
MOQ:900
Mult:300
SPQ:300
Conn PL 2Power/76Signal POS Solder ST Thru-Hole 1 Port T/R
Pre-order
50,400
Factory Lead Time:22-26 weeks
504+$36.9125
1,008+$32.7125
2,520+$28.0375
5,040+$25.2375
10,080+$22.4375
- +
Ext. Price(USD):$18,603.90
MOQ:504
Mult:504
SPQ:504
Pre-order
12,500
Factory Lead Time:22-26 weeks
125+$3.6625
500+$3.4625
1,000+$3.025
2,500+$2.8125
5,000+$2.675
- +
Ext. Price(USD):$457.81
MOQ:125
Mult:125
SPQ:125
JST
ECAD Model:
Board to Board Receptacle, 5 Pos, 2.5mm Pitch, Solder, Straight, Thru-Hole
Available Stock
230
Estimated Ship Time:6-7 working days
20+$0.354
- +
Ext. Price(USD):$7.08
MOQ:20
Mult:20
Wire-to-Board HDR 16-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.8872
- +
Ext. Price(USD):$3,566.80
MOQ:1,890
Mult:1,890
SPQ:630
JST
Package:SMD,P=1mm
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 5 POS 1mm Solder ST Top Entry SMD T/R
Available Stock
770
Estimated Ship Time:6-7 working days
20+$0.7729
- +
Ext. Price(USD):$15.45
MOQ:20
Mult:20
25 / PageGoto