Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
2,700,000
Factory Lead Time:15 weeks
5,400+$0.8496
- +
Ext. Price(USD):$4,587.84
MOQ:5,400
Mult:5,400
SPQ:1,800
Molex
ECAD Model:
Board to Board Connector, 80 Pos, 0.4mm Pitch, Solder, Surface Mount, SlimStack™, T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.1024
- +
Ext. Price(USD):$4,653.60
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$6.2326
- +
Ext. Price(USD):$6,731.20
MOQ:1,080
Mult:1,080
SPQ:360
CT P/HDR BOX V 10P T/P NAT W/O
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.525
5,000+$0.45
500,000+$0.25
750,000+$0.2325
- +
Ext. Price(USD):$1,575.00
MOQ:3,000
Mult:3,000
Wire-to-Board Connector HDR, 14-Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.8949
- +
Ext. Price(USD):$805.41
MOQ:900
Mult:300
SPQ:300
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.1259
- +
Ext. Price(USD):$8,213.31
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.8391
- +
Ext. Price(USD):$1,510.38
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Shrouded Header HDR 17 POS 1.5mm Solder ST Thru-Hole
Available Stock
3,528
Estimated Ship Time:4-6 working days
392+$0.1305
- +
Ext. Price(USD):$51.15
MOQ:392
Mult:392
SPQ:392
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$1.1717
- +
Ext. Price(USD):$949.07
MOQ:810
Mult:810
SPQ:270
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header, Dual Row, Vertical, TH, 0.38μm Gold Au Plating, No Peg, 3.60mm Tail Length, Pick & Place Cap, 40 Circuits, Glow Wire, Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$2.8375
- +
Ext. Price(USD):$16,684.50
MOQ:5,880
Mult:5,880
SPQ:5,880
Unshrouded Header, HDR, 8 POS, 2.54mm, Solder, ST, Thru-Hole
Available Stock
1,000
Estimated Ship Time:6-7 working days
20+$0.4503
- +
Ext. Price(USD):$9.00
MOQ:20
Mult:20
Wire-to-Board Header 4 POS 3mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.3492
- +
Ext. Price(USD):$1,619.04
MOQ:1,200
Mult:1,200
SPQ:1,200
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$5.5118
- +
Ext. Price(USD):$8,185.02
MOQ:1,485
Mult:1,485
SPQ:495
Conn Shrouded Header (4 Sides) HDR 3 POS 2.5mm Solder ST Top Entry Thru-Hole
Available Stock
15,990
Estimated Ship Time:6-7 working days
22+
20+$0.1097
1,000+$0.0357
- +
Ext. Price(USD):$2.19
MOQ:20
Mult:20
Molex
ECAD Model:
TEN60 VERT RECEPT ASSY
Pre-order
48,000
Factory Lead Time:22-26 weeks
480+$23.7
1,200+$20.75
3,000+$20.3125
- +
Ext. Price(USD):$11,376.00
MOQ:480
Mult:480
Connector Header MINI CT SGL DIP V 20P BLACK
Pre-order
2,700,000
Factory Lead Time:22-26 weeks
27,000+$0.4875
50,000+$0.475
1,000,000+$0.3238
2,000,000+$0.3075
- +
Ext. Price(USD):$13,162.50
MOQ:27,000
Mult:27,000
Wire-to-Board Connector HDR 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$2.7333
- +
Ext. Price(USD):$5,165.93
MOQ:1,890
Mult:1,890
SPQ:945
Board to Board Connector PL 40 POS 0.5mm Solder ST Top Entry SMD Reel
Available Stock
48
Estimated Ship Time:6-12 working days
1+$12.059
10+$11.2551
250+$10.8531
500+$10.8531
- +
Ext. Price(USD):$24.11
MOQ:2
Mult:1
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
1,890,000
Factory Lead Time:15 weeks
3,780+$0.712
- +
Ext. Price(USD):$2,691.36
MOQ:3,780
Mult:3,780
SPQ:1,260
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5327
- +
Ext. Price(USD):$958.86
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Wire to Board SKT 19 POS 1mm IDT ST Cable Mount Box
Pre-order
27,000
Factory Lead Time:18-22 weeks
26+
2,700+$0.2468
8,100+$0.2427
13,500+$0.2365
- +
Ext. Price(USD):$666.36
MOQ:2,700
Mult:2,700
SPQ:2,700
Wire-to-Board Connector HDR, 16 POS, 3mm Pitch, Solder, ST Top Entry, Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.5024
- +
Ext. Price(USD):$2,839.53
MOQ:1,890
Mult:1,890
SPQ:630
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7462
- +
Ext. Price(USD):$1,571.58
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
4 Pin Connector Header
Pre-order
840,000
Factory Lead Time:22-26 weeks
8,400+$0.425
21,000+$0.3738
50,400+$0.3663
- +
Ext. Price(USD):$3,570.00
MOQ:8,400
Mult:8,400
25 / PageGoto