Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$1.1926
- +
Ext. Price(USD):$1,449.00
MOQ:1,215
Mult:1,215
SPQ:405
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.618
- +
Ext. Price(USD):$5,056.20
MOQ:900
Mult:900
SPQ:300
Plug Assembly 6.6 Vertical 0.64 Cl Gull Wing Leads Pocket Tape Package Mictor
Pre-order
50,400
Factory Lead Time:22-26 weeks
504+$29.6125
1,008+$26.2375
2,520+$22.4875
5,040+$20.25
10,080+$17.9875
- +
Ext. Price(USD):$14,924.70
MOQ:504
Mult:504
SPQ:504
Molex
ECAD Model:
Conn Shrouded Header HDR 10 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$1.025
8,100+$0.8875
20,700+$0.875
- +
Ext. Price(USD):$2,767.50
MOQ:2,700
Mult:2,700
Wire-to-Board Connector HDR, 14-Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$4.6535
- +
Ext. Price(USD):$4,188.15
MOQ:900
Mult:900
SPQ:300
Board-to-Board Connector
Available Stock
78
Estimated Ship Time:6-12 working days
1+$51.7887
5+$50.8639
50+$49.9391
100+$49.9391
- +
Ext. Price(USD):$51.78
MOQ:1
Mult:1
JST
ECAD Model:
Board to Board Connector, 9 Pos, 1.25mm Pitch, Solder, Right Angle, Thru-Hole
Available Stock
6,400
Estimated Ship Time:6-7 working days
25+
800+$0.1244
- +
Ext. Price(USD):$99.52
MOQ:800
Mult:800
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector Header Dual Row Right Angle TH 30 Gold Plated Natural Color 2 Pos LCP Glow Wire
Pre-order
2,070,000
Factory Lead Time:15 weeks
4,140+$1.3318
- +
Ext. Price(USD):$5,513.65
MOQ:4,140
Mult:4,140
SPQ:2,070
Pre-order
409,200
Factory Lead Time:25-42 weeks
4,092+$1.5288
- +
Ext. Price(USD):$6,255.84
MOQ:4,092
Mult:186
SPQ:186
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8217
- +
Ext. Price(USD):$986.04
MOQ:1,200
Mult:1,200
SPQ:400
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
450
Estimated Ship Time:14-17 working days
100+$0.3261
300+$0.2699
5,000+$0.2011
10,000+$0.2
- +
Ext. Price(USD):$50.21
MOQ:154
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Socket Strip RCP 3 POS 2.54mm Solder ST Thru-Hole KK® Tray
Pre-order
67,800
Factory Lead Time:22-26 weeks
678+$0.3088
2,709+$0.2925
- +
Ext. Price(USD):$209.36
MOQ:678
Mult:678
SPQ:678
Phoenix Contact 1.27mm Pitch 80-Pin Dual Row Receptacle, FP 1.27/ 80-FH Series, Surface Mount
Pre-order
56,000
Factory Lead Time:10-20 weeks
560+$21.0061
5,600+$20.5592
- +
Ext. Price(USD):$11,763.41
MOQ:560
Mult:560
SPQ:560
Molex
ECAD Model:
1.50mm Pitch CLIK Mate PCB Receptacle, Single Row, SMD, Right Angle, Tin Plated, Positive Lock, 5 Circuits, Blue
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.7125
2,000+$0.6375
5,000+$0.6125
- +
Ext. Price(USD):$712.50
MOQ:1,000
Mult:1,000
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5557
- +
Ext. Price(USD):$3,450.19
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.9261
- +
Ext. Price(USD):$5,333.49
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.4318
- +
Ext. Price(USD):$1,036.32
MOQ:2,400
Mult:2,400
SPQ:1,200
JST
ECAD Model:
Conn Unshrouded Header HDR 8 POS 3.96mm Solder ST Thru-Hole
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.35
13,500+$0.3442
22,500+$0.3354
- +
Ext. Price(USD):$1,575.00
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.289
- +
Ext. Price(USD):$722.50
MOQ:2,500
Mult:500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6998
- +
Ext. Price(USD):$1,049.70
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7225
- +
Ext. Price(USD):$975.37
MOQ:1,350
Mult:450
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm Solder ST Thru-Hole
Pre-order
27,600
Factory Lead Time:22-26 weeks
276+$1.1625
552+$1.0875
1,104+$1.025
2,500+$0.8875
5,000+$0.825
- +
Ext. Price(USD):$320.85
MOQ:276
Mult:276
SPQ:276
Conn Socket Strip SKT 14 POS 2.54mm Solder ST Top Entry Thru-Hole Bag
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$5.3
1,000+$4.075
5,000+$3.175
10,000+$3.025
25,000+$2.9375
- +
Ext. Price(USD):$2,650.00
MOQ:500
Mult:500
SPQ:500
Shrouded Header Connector, HDR 2 POS, 1.5mm Pitch, Solder RA Thru-Hole, Box
Available Stock
198
Estimated Ship Time:6-7 working days
20+$0.1388
- +
Ext. Price(USD):$2.77
MOQ:20
Mult:20
Conn Shrouded Header HDR 36 POS 2mm Solder ST SMD Minitek® T/R
Pre-order
8,000
Factory Lead Time:10-16 weeks
24+
800+$2.731
1,600+$2.6596
- +
Ext. Price(USD):$2,184.80
MOQ:800
Mult:800
SPQ:800
25 / PageGoto