Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Pre-order
570,000
Factory Lead Time:22-26 weeks
5,700+$0.2813
11,400+$0.2663
- +
Ext. Price(USD):$1,603.41
MOQ:5,700
Mult:5,700
SPQ:5,700
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$2.002
- +
Ext. Price(USD):$3,603.60
MOQ:1,800
Mult:1,800
SPQ:600
Conn Shrouded Header HDR 5 POS 2mm Solder ST Thru-Hole Box
Available Stock
380
Estimated Ship Time:6-7 working days
20+$0.2258
- +
Ext. Price(USD):$4.51
MOQ:20
Mult:20
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6389
- +
Ext. Price(USD):$1,725.03
MOQ:2,700
Mult:2,700
SPQ:900
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2.54mm Solder RA Side Entry Thru-Hole C-Grid III™ Tray
Pre-order
136,000
Factory Lead Time:22-26 weeks
1,360+$1.2625
2,720+$1.1875
- +
Ext. Price(USD):$1,717.00
MOQ:1,360
Mult:1,360
SPQ:1,360
JST
ECAD Model:
Conn Board to Board PL 20 POS 0.5mm Solder ST Top Entry SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.594
24,000+$0.5841
40,000+$0.5692
- +
Ext. Price(USD):$4,752.00
MOQ:8,000
Mult:8,000
SPQ:8,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.5449
- +
Ext. Price(USD):$1,307.76
MOQ:2,400
Mult:1,200
SPQ:400
JST
ECAD Model:
Wire-to-Board Connector HDR 4 POS 3.96mm Solder Straight Thru-Hole Box
Available Stock
4,620
Estimated Ship Time:6-7 working days
22+
20+$0.325
250+$0.114
- +
Ext. Price(USD):$6.50
MOQ:20
Mult:20
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7381
- +
Ext. Price(USD):$885.72
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Connector HDR 2 Pos 3mm Solder RA Side Entry Thru-Hole Tray
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.3256
- +
Ext. Price(USD):$879.12
MOQ:2,700
Mult:2,700
SPQ:2,700
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4206
- +
Ext. Price(USD):$1,278.54
MOQ:900
Mult:900
SPQ:300
Connector Ejector Header HDR 40 POS 2.54mm Solder RA Side Entry Thru-Hole
Available Stock
161
Estimated Ship Time:6-12 working days
10+$1.12
100+$1.1
500+$1.1
1,000+$1.08
2,500+$1.08
- +
Ext. Price(USD):$24.64
MOQ:22
Mult:1
JST
ECAD Model:
Conn IDC Connector F 7 POS 2mm Solder ST Thru-Hole Box
Available Stock
980
Estimated Ship Time:3-4 working days
100+$0.1958
200+$0.1893
300+$0.1843
- +
Ext. Price(USD):$19.58
MOQ:100
Mult:1
SPQ:200
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$0.6041
- +
Ext. Price(USD):$978.64
MOQ:1,620
Mult:1,620
SPQ:810
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4276
- +
Ext. Price(USD):$1,284.84
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.5094
- +
Ext. Price(USD):$5,858.46
MOQ:900
Mult:300
SPQ:300
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.8391
- +
Ext. Price(USD):$1,510.38
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
180,000
Factory Lead Time:15 weeks
360+$1.2204
- +
Ext. Price(USD):$878.68
MOQ:720
Mult:360
SPQ:360
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2918
- +
Ext. Price(USD):$1,162.62
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector HDR, 16 POS, 3mm Pitch, Solder, ST Top Entry, Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.2761
- +
Ext. Price(USD):$2,411.82
MOQ:1,890
Mult:1,890
SPQ:630
Molex
ECAD Model:
Shrouded Header (4 Sides), HDR 6 POS, 2mm Pitch, Solder RA, Thru-Hole, Tube
Pre-order
444,000
Factory Lead Time:22-26 weeks
4,440+$1.6875
- +
Ext. Price(USD):$7,492.50
MOQ:4,440
Mult:4,440
SPQ:4,440
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5181
- +
Ext. Price(USD):$1,366.29
MOQ:900
Mult:900
SPQ:300
PIN HEADER, 36POS, 1ROW, 2.54MM, THT;
Available Stock
28
Estimated Ship Time:6-12 working days
1+$8.9861
10+$8.387
250+$8.0875
500+$8.0875
- +
Ext. Price(USD):$26.95
MOQ:3
Mult:1
Conn Socket Strip SKT 22 POS 2mm Solder RA SMD T/R
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$4.0125
5,400+$3.225
10,200+$2.8125
25,200+$2.575
50,400+$2.4125
- +
Ext. Price(USD):$9,630.00
MOQ:2,400
Mult:2,400
SPQ:2,400
Pre-order
2,700,000
Factory Lead Time:15 weeks
5,400+$0.8496
- +
Ext. Price(USD):$4,587.84
MOQ:5,400
Mult:5,400
SPQ:1,800
25 / PageGoto