Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$0.4701
- +
Ext. Price(USD):$1,353.88
MOQ:2,880
Mult:2,880
SPQ:960
Conn Mictor SB Connector RCP 40 POS 0.8mm Solder ST Top Entry SMD
Pre-order
260,000
Factory Lead Time:22-26 weeks
2,600+$7.6875
5,200+$7.2625
50,050+$5.975
100,100+$5.725
- +
Ext. Price(USD):$19,987.50
MOQ:2,600
Mult:2,600
Wire-to-Board Connector HDR 4 Pos 4.2mm Solder Right Angle Side Entry TH Tray
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$1.3283
- +
Ext. Price(USD):$4,781.88
MOQ:3,600
Mult:1,200
SPQ:1,200
Molex
ECAD Model:
PCB Header 2.00mm Pitch Dual Row Vertical TH 0.05μm Gold Plated 2.60mm Tail 48 Circuits Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$2.3375
- +
Ext. Price(USD):$13,090.00
MOQ:5,600
Mult:5,600
SPQ:5,600
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1073
- +
Ext. Price(USD):$1,993.14
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Wire to Wire HDR 21 POS 1mm IDT ST Cable Mount Box
Pre-order
18,000
Factory Lead Time:18-22 weeks
26+
1,800+$0.4812
5,400+$0.4731
9,000+$0.4611
- +
Ext. Price(USD):$866.16
MOQ:1,800
Mult:1,800
SPQ:1,800
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.8496
- +
Ext. Price(USD):$2,293.92
MOQ:2,700
Mult:2,700
SPQ:900
Shrouded Header, 10 Pos, 3.81mm Pitch, Solder, ST, Thru-Hole
Available Stock
95
Estimated Ship Time:14-17 working days
10+$2.8455
30+$2.2797
500+$1.7199
1,000+$1.7129
- +
Ext. Price(USD):$51.21
MOQ:18
Mult:1
SPQ:1
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5644
- +
Ext. Price(USD):$3,461.94
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR 16 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
202,500
Factory Lead Time:15 weeks
405+$0.6842
- +
Ext. Price(USD):$831.30
MOQ:1,215
Mult:405
SPQ:405
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9836
- +
Ext. Price(USD):$885.24
MOQ:900
Mult:300
SPQ:300
Disconnectable Crimp Style Connectors, 2.5mm Pitch
Available Stock
1,605
Estimated Ship Time:6-7 working days
26+
20+$0.5302
150+$0.1825
- +
Ext. Price(USD):$10.60
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Board to Board 24 POS 0.4mm Solder ST SMD
Available Stock
288
Estimated Ship Time:3-5 working days
07+
10+$1.6972
30+$1.6688
50+$1.6103
- +
Ext. Price(USD):$16.97
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
IDC Connector RCP 9 POS 2mm IDT RA Cable Mount Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.1073
72,000+$0.1056
120,000+$0.1028
- +
Ext. Price(USD):$2,575.20
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
Package:SMD,P=1.25mm
ECAD Model:
Conn Shrouded Header HDR 14 POS 1.25mm Solder ST Top Entry SMD T/R
Available Stock
110
Estimated Ship Time:14-17 working days
50+$0.6124
100+$0.5261
4,000+$0.3661
10,000+$0.365
- +
Ext. Price(USD):$50.21
MOQ:82
Mult:1
SPQ:1
Molex
Package:SMD,P=1.5mm
ECAD Model:
Conn Shrouded Header HDR 10 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$0.9625
8,100+$0.85
20,700+$0.8375
- +
Ext. Price(USD):$2,598.75
MOQ:2,700
Mult:2,700
Conn Multilock HDR 64 POS 3mm Solder RA Thru-Hole Automotive
Pre-order
5,600
Factory Lead Time:22-26 weeks
56+$12.075
108+$10.15
216+$8.5375
- +
Ext. Price(USD):$676.20
MOQ:56
Mult:56
SPQ:56
JST
ECAD Model:
Shrouded Header 5 Pos 5.08mm Solder Right Angle Thru-Hole
Pre-order
10,500
Factory Lead Time:18-22 weeks
26+
1,050+$1.4809
3,150+$1.4562
5,250+$1.4191
- +
Ext. Price(USD):$1,554.94
MOQ:1,050
Mult:1,050
SPQ:1,050
JST
ECAD Model:
Conn Wire to Wire HDR 11 POS 1.5mm ST Cable Mount Box
Available Stock
4,870
Estimated Ship Time:4-6 working days
1+$0.2306
100+$0.2047
500+$0.1872
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:1
Pre-order
1,575,000
Factory Lead Time:15 weeks
3,150+$0.2263
- +
Ext. Price(USD):$712.84
MOQ:3,150
Mult:3,150
SPQ:1,575
Conn Shrouded Header RCP 30 POS 1mm Solder RA SMD T/R
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$2.0696
36,000+$2.035
60,000+$1.9833
- +
Ext. Price(USD):$24,835.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.5188
- +
Ext. Price(USD):$1,245.12
MOQ:2,400
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
2,520
Estimated Ship Time:4-6 working days
252+$1.1759
- +
Ext. Price(USD):$296.32
MOQ:252
Mult:252
SPQ:252
Wire-to-Board Connector HDR 22 POS 3mm Solder ST Top Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7148
- +
Ext. Price(USD):$2,314.98
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header HDR 10 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
2,520
Estimated Ship Time:4-6 working days
21+
168+$2.1158
- +
Ext. Price(USD):$355.45
MOQ:168
Mult:168
SPQ:168
25 / PageGoto