Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.7917
- +
Ext. Price(USD):$11,868.79
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.4864
- +
Ext. Price(USD):$5,383.68
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
PCB Header, 2.00mm Pitch, Dual Row, Vertical, TH, Tin Plated, Pegged, 3.60mm Tail, 26 Circuits, Glow Wire Capable, Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.325
- +
Ext. Price(USD):$6,678.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 40 POS 2.54mm Solder RA Thru-Hole Stac64 Automotive Tray
Pre-order
56,000
Factory Lead Time:22-26 weeks
560+$3.7
1,120+$3.5
- +
Ext. Price(USD):$2,072.00
MOQ:560
Mult:560
SPQ:560
Wire-to-Board HDR, 22 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
360,000
Factory Lead Time:15 weeks
720+$7.9665
- +
Ext. Price(USD):$5,735.88
MOQ:720
Mult:720
SPQ:240
JST
ECAD Model:
Conn Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
433
Estimated Ship Time:4-6 working days
1+$6.3754
108+$4.66
- +
Ext. Price(USD):$6.37
MOQ:1
Mult:1
SPQ:108
Molex
ECAD Model:
Wire-to-Board Connector HDR, 4 Pos, 3.96mm Pitch, Solder, ST Top Entry, TH
Pre-order
67,500
Factory Lead Time:22-26 weeks
675+$0.34
2,700+$0.3225
- +
Ext. Price(USD):$229.50
MOQ:675
Mult:675
SPQ:675
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8461
- +
Ext. Price(USD):$1,142.23
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.4815
- +
Ext. Price(USD):$2,666.70
MOQ:1,800
Mult:600
SPQ:600
Aptiv
ECAD Model:
SICMA Female Male Header
Pre-order
2,000
Factory Lead Time:12 weeks
200+$0.5224
- +
Ext. Price(USD):$104.48
MOQ:200
Mult:200
Headers and PCB Receptacles Connector, Solder, Vertical Termination
Pre-order
60,000
Factory Lead Time:16-18 weeks
6,000+$0.1996
- +
Ext. Price(USD):$1,197.60
MOQ:6,000
Mult:6,000
Conn Shrouded Header HDR 10 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
67,200
Factory Lead Time:16-18 weeks
6,720+$0.0458
- +
Ext. Price(USD):$307.77
MOQ:6,720
Mult:6,720
Shrouded Header THT Type
Available Stock
20
Estimated Ship Time:6-7 working days
20+$2.0102
- +
Ext. Price(USD):$40.20
MOQ:20
Mult:20
Molex
ECAD Model:
Wire-to-Board HDR 12 Pos 1.25mm Solder RA Side Entry SMD T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.7125
8,000+$1.5
20,000+$1.475
- +
Ext. Price(USD):$5,137.50
MOQ:3,000
Mult:3,000
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.8531
- +
Ext. Price(USD):$2,047.44
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$8.2904
- +
Ext. Price(USD):$11,192.04
MOQ:1,350
Mult:1,350
SPQ:450
Shrouded Header, 8-Pos, 2.54mm Pitch, Solder, ST, Thru-Hole
Pre-order
5,000
Factory Lead Time:22-26 weeks
50+$2.0875
100+$1.7625
200+$1.475
500+$1.175
1,000+$0.9125
- +
Ext. Price(USD):$104.37
MOQ:50
Mult:50
SPQ:50
Conn Unshrouded Header HDR 11 POS 2.54mm Solder ST Thru-Hole Package
Pre-order
50,000
Factory Lead Time:22-26 weeks
500+$2.625
1,000+$2.4875
2,500+$2.3
5,000+$2.2125
10,000+$2.1375
- +
Ext. Price(USD):$1,312.50
MOQ:500
Mult:500
SPQ:500
JST Board-to-Board Connector, CZ Series, 8-Ch, 1.5mm, 2mm Pitch, Plug, TH
Available Stock
7,766
Estimated Ship Time:6-7 working days
22+
20+$0.2789
560+$0.0958
- +
Ext. Price(USD):$5.57
MOQ:20
Mult:20
Conn Shrouded Header HDR 3 POS 2.54mm Solder RA Thru-Hole Carton
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$0.575
5,400+$0.5
10,000+$0.4625
25,000+$0.4125
- +
Ext. Price(USD):$1,552.50
MOQ:2,700
Mult:2,700
SPQ:2,700
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3573
- +
Ext. Price(USD):$3,182.35
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header HDR 12 POS 2.5mm Solder RA Thru-Hole
Available Stock
144
Estimated Ship Time:14-17 working days
10+$2.4427
30+$1.8687
500+$1.3666
1,000+$1.3584
- +
Ext. Price(USD):$51.29
MOQ:21
Mult:1
SPQ:1
Wire-to-Board Header, 24 POS, 4.2mm Pitch, Solder, Right Angle, Side Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.781
- +
Ext. Price(USD):$2,404.35
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7034
- +
Ext. Price(USD):$844.08
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Conn Wire to Board HDR 6 POS 3mm Solder ST Top Entry SMD
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$0.9
3,600+$0.8625
- +
Ext. Price(USD):$1,620.00
MOQ:1,800
Mult:1,800
SPQ:1,800
25 / PageGoto