Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.4665
- +
Ext. Price(USD):$1,259.55
MOQ:2,700
Mult:900
SPQ:900
Conn Shrouded Header HDR 6POS 2.5mm Solder ST Thru-Hole Bag/Box
Pre-order
480,000
Factory Lead Time:25-42 weeks
4,800+$0.9716
- +
Ext. Price(USD):$4,663.68
MOQ:4,800
Mult:1,600
SPQ:1,600
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3823
- +
Ext. Price(USD):$1,244.07
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$4.0125
- +
Ext. Price(USD):$12,037.50
MOQ:3,000
Mult:3,000
SPQ:3,000
JST
ECAD Model:
IDC Connector, F, 9 POS, 1.5mm, IDT, RA, Cable Mount
Available Stock
5,060
Estimated Ship Time:4-6 working days
1+$0.0758
- +
Ext. Price(USD):$0.07
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.8681
- +
Ext. Price(USD):$2,802.15
MOQ:1,500
Mult:500
SPQ:500
Shrouded Header, 4-Pos, 2mm Pitch, Solder RA, SMD
Available Stock
462
Estimated Ship Time:6-7 working days
26+
20+$0.3637
- +
Ext. Price(USD):$7.27
MOQ:20
Mult:20
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.8395
- +
Ext. Price(USD):$3,833.32
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR 20 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$6.8314
- +
Ext. Price(USD):$8,300.15
MOQ:1,215
Mult:1,215
SPQ:405
Wurth Elektronik WR-PHD Series 2mm Pitch 8-Pin Receptacle, Right Angle
Available Stock
39
Estimated Ship Time:6-12 working days
10+$1.038
100+$0.9515
500+$0.9515
1,000+$0.9342
2,500+$0.9342
- +
Ext. Price(USD):$24.91
MOQ:24
Mult:1
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.8098
- +
Ext. Price(USD):$3,793.23
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.3074
- +
Ext. Price(USD):$5,676.66
MOQ:900
Mult:900
SPQ:300
Conn Shrouded Header HDR 50 POS 1.27mm Solder ST Top Entry SMD
Available Stock
187
Estimated Ship Time:5-7 working days
2+$13.8581
- +
Ext. Price(USD):$27.71
MOQ:2
Mult:1
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Top Entry SMD BergStik® Bag
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$0.5605
1,000+$0.5459
- +
Ext. Price(USD):$280.25
MOQ:500
Mult:500
SPQ:500
JST VH Series Wire-to-Board Connector, 2-Pin Header, Straight
Available Stock
16,618
Estimated Ship Time:5-9 working days
22+
10+$0.1606
50+$0.1252
150+$0.1231
- +
Ext. Price(USD):$1.60
MOQ:10
Mult:5
SPQ:200
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2mm Solder ST SMD Tube
Pre-order
405,000
Factory Lead Time:22-26 weeks
4,050+$1.45
- +
Ext. Price(USD):$5,872.50
MOQ:4,050
Mult:4,050
SPQ:4,050
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$6.1525
- +
Ext. Price(USD):$8,305.87
MOQ:1,350
Mult:1,350
SPQ:450
Conn Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Bag/Box
Available Stock
596
Estimated Ship Time:6-7 working days
21+
20+$0.3607
100+$0.1875
- +
Ext. Price(USD):$7.21
MOQ:20
Mult:20
Wire-to-Board Connector HDR 10 Pos 3mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.6058
- +
Ext. Price(USD):$1,453.92
MOQ:2,400
Mult:2,400
SPQ:800
JST
ECAD Model:
Conn IDC Connector RCP 6 POS 2mm IDT RA Cable Mount Box
Pre-order
360,000
Factory Lead Time:16-18 weeks
36,000+$0.0704
- +
Ext. Price(USD):$2,534.40
MOQ:36,000
Mult:36,000
Molex
ECAD Model:
Header Unshrouded 36 Pos 2.54mm Solder Straight Thru-Hole C-Grid III Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$2.5875
- +
Ext. Price(USD):$7,762.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board Connector Receptacle 1 Pos Solder RA Thru-Hole
Available Stock
285
Estimated Ship Time:6-12 working days
1+$3.95
10+$3.792
500+$3.4128
1,000+$3.4128
- +
Ext. Price(USD):$27.65
MOQ:7
Mult:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 11 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
6,500
Estimated Ship Time:4-6 working days
500+$0.1061
- +
Ext. Price(USD):$53.05
MOQ:500
Mult:500
SPQ:500
Pre-order
400,000
Factory Lead Time:18 weeks
800+$3.5967
- +
Ext. Price(USD):$2,877.36
MOQ:800
Mult:50
SPQ:50
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3099
- +
Ext. Price(USD):$929.70
MOQ:3,000
Mult:1,500
SPQ:500
25 / PageGoto