Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Shrouded Header HDR 3 POS 2mm Solder ST Thru-Hole Automotive Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0878
72,000+$0.0863
120,000+$0.0841
- +
Ext. Price(USD):$2,107.20
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
JST Wire-to-Board Connector, EH Series, 2.5mm Pitch, 3-Pin, Straight, TH
Available Stock
2,209
Estimated Ship Time:4-6 working days
1+$0.0227
1,000+$0.0212
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
C-Grid III Header Dual Row Vertical Shrouded Fully Loaded 28 Circuits Black 3um Tin (Sn) over Nickel (Ni)
Pre-order
320,000
Factory Lead Time:22-26 weeks
3,200+$1.0875
8,000+$0.95
20,000+$0.925
- +
Ext. Price(USD):$3,480.00
MOQ:3,200
Mult:3,200
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3875
- +
Ext. Price(USD):$1,248.75
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Board to Board Connector PL 15 POS 1.25mm Solder ST Thru-Hole Box
Pre-order
16,800
Factory Lead Time:16-18 weeks
1,680+$0.4246
- +
Ext. Price(USD):$713.32
MOQ:1,680
Mult:1,680
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9435
- +
Ext. Price(USD):$849.15
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
400,000
Factory Lead Time:15 weeks
800+$0.9941
- +
Ext. Price(USD):$795.28
MOQ:800
Mult:800
SPQ:400
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7851
- +
Ext. Price(USD):$1,059.88
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.4875
4,000+$1.3
10,000+$1.275
- +
Ext. Price(USD):$2,677.50
MOQ:1,800
Mult:1,800
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 2mm Solder ST SMD T/R
Pre-order
80,000
Factory Lead Time:18-22 weeks
26+
8,000+$0.2142
24,000+$0.2107
40,000+$0.2053
- +
Ext. Price(USD):$1,713.60
MOQ:8,000
Mult:8,000
SPQ:8,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.5988
- +
Ext. Price(USD):$718.56
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Conn Unshrouded Header HDR 4 POS 2.54mm Solder ST Top Entry Thru-Hole KK® Bulk
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.2325
12,000+$0.2063
- +
Ext. Price(USD):$1,395.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Pre-order
2,800
Factory Lead Time:22-26 weeks
28+$2.45
169+$2.3625
585+$2.2625
- +
Ext. Price(USD):$68.60
MOQ:28
Mult:28
SPQ:28
JST
ECAD Model:
IDC Connector RCP 7 POS 2.5mm IDT RA Cable Mount Box
Available Stock
2,000
Estimated Ship Time:4-6 working days
500+$0.2758
- +
Ext. Price(USD):$137.90
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 1.25mm Solder RA SMD PicoBlade T/R
Available Stock
2,617
Estimated Ship Time:14-17 working days
300+$0.1288
500+$0.1165
5,000+$0.0891
10,000+$0.0891
- +
Ext. Price(USD):$50.10
MOQ:389
Mult:1
SPQ:1
Conn Shrouded Header HDR 20 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
180
Estimated Ship Time:14-17 working days
100+$0.4206
300+$0.3644
4,000+$0.2878
5,000+$0.2878
- +
Ext. Price(USD):$50.05
MOQ:119
Mult:1
SPQ:1
Molex
ECAD Model:
Wire-to-Board Connector RCP, 24 POS, 2.54mm, Solder RA Thru-Hole, EXTreme LPHPower™ Tray
Pre-order
153,000
Factory Lead Time:22-26 weeks
1,530+$3.725
4,000+$3.2625
10,000+$3.1875
- +
Ext. Price(USD):$5,699.25
MOQ:1,530
Mult:1,530
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1838
- +
Ext. Price(USD):$1,065.42
MOQ:900
Mult:900
SPQ:300
Shrouded Header (4 Sides), HDR 2 POS, 2mm Pitch, Solder, ST Top Entry, Thru-Hole, Box
Available Stock
4,000
Estimated Ship Time:6-7 working days
23+
1,000+$0.0482
- +
Ext. Price(USD):$48.20
MOQ:1,000
Mult:1,000
JST
ECAD Model:
Conn Shrouded Header HDR 21 POS 1mm Solder ST Thru-Hole Box
Pre-order
28,800
Factory Lead Time:18-22 weeks
26+
2,880+$0.2776
8,640+$0.2729
14,400+$0.266
- +
Ext. Price(USD):$799.48
MOQ:2,880
Mult:2,880
SPQ:2,880
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.2988
- +
Ext. Price(USD):$3,740.54
MOQ:2,880
Mult:2,880
SPQ:960
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 3 POS 1.5mm Solder ST Top Entry TH Box
Pre-order
480,000
Factory Lead Time:18-22 weeks
26+
48,000+$0.0646
144,000+$0.0635
240,000+$0.0619
- +
Ext. Price(USD):$3,100.80
MOQ:48,000
Mult:48,000
SPQ:48,000
Molex
ECAD Model:
Conn Board to Board PL 50 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
65
Estimated Ship Time:3-5 working days
04+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Shrouded Header (4 Sides) HDR 3 Pos 5.08mm Solder ST Top Entry Thru-Hole
Available Stock
214
Estimated Ship Time:6-12 working days
1+$0.641
250+$0.641
500+$0.6295
1,000+$0.6181
5,000+$0.6181
- +
Ext. Price(USD):$24.35
MOQ:38
Mult:1
Molex
ECAD Model:
Conn Wire to Board PL 40 POS 2.54mm Solder RA Thru-Hole EXTreme PowerPlus™ Tray
Pre-order
128,000
Factory Lead Time:22-26 weeks
1,280+$4.275
4,000+$3.75
10,000+$3.675
- +
Ext. Price(USD):$5,472.00
MOQ:1,280
Mult:1,280
25 / PageGoto