Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Unshrouded Header HDR 2 POS 2.54mm Solder RA Thru-Hole Carton
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$0.2775
10,000+$0.2463
50,000+$0.205
100,000+$0.1788
250,000+$0.1638
- +
Ext. Price(USD):$1,387.50
MOQ:5,000
Mult:5,000
SPQ:5,000
JST
ECAD Model:
Through Hole Type Shrouded Header
Available Stock
1
Estimated Ship Time:4-6 working days
1+$0.3313
- +
Ext. Price(USD):$0.33
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
45,500
Factory Lead Time:22-26 weeks
455+$1.05
1,820+$0.975
- +
Ext. Price(USD):$477.75
MOQ:455
Mult:455
SPQ:455
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.6381
- +
Ext. Price(USD):$5,974.29
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Header PL 2Power/25Signal POS Press Fit RA Thru-Hole 49 Terminal 1 Port EXTreme Tray
Pre-order
27,000
Factory Lead Time:22-26 weeks
270+$18.3
800+$16.025
2,000+$15.675
- +
Ext. Price(USD):$4,941.00
MOQ:270
Mult:270
JST
ECAD Model:
Conn Unshrouded Header HDR 3 POS 3.96mm Solder ST Thru-Hole
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1407
27,000+$0.1384
45,000+$0.1349
- +
Ext. Price(USD):$1,266.30
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7991
- +
Ext. Price(USD):$958.92
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7991
- +
Ext. Price(USD):$1,078.78
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Board to Board RCP 13 POS 1.25mm Solder ST Thru-Hole Box
Available Stock
187
Estimated Ship Time:4-6 working days
25+
1+$0.8501
- +
Ext. Price(USD):$0.85
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole Package
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$3.8875
5,000+$3.5
10,000+$3.1875
25,000+$2.9625
50,000+$2.825
- +
Ext. Price(USD):$11,662.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Molex
ECAD Model:
Nano-Fit Vertical Header, Through Hole, 2.50mm Pitch, Single Row
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.0875
4,000+$0.95
10,000+$0.9375
- +
Ext. Price(USD):$1,957.50
MOQ:1,800
Mult:1,800
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$0.9854
- +
Ext. Price(USD):$2,394.52
MOQ:2,430
Mult:2,430
SPQ:810
JST
ECAD Model:
Conn Unshrouded Header HDR 8 POS 2.5mm Solder RA Thru-Hole
Available Stock
500
Estimated Ship Time:6-7 working days
23+
500+$0.3094
- +
Ext. Price(USD):$154.70
MOQ:500
Mult:500
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8913
- +
Ext. Price(USD):$1,336.95
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn Shrouded Header HDR 5 POS 5.08mm Solder ST Thru-Hole Box
Available Stock
40
Estimated Ship Time:4-6 working days
26+
1+$4.4735
- +
Ext. Price(USD):$4.47
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.6713
- +
Ext. Price(USD):$2,506.95
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector HDR 16 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$6.29
- +
Ext. Price(USD):$7,642.35
MOQ:1,215
Mult:1,215
SPQ:405
Unshrouded Header, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole, Carton
Pre-order
640,000
Factory Lead Time:22-26 weeks
6,400+$1.1375
10,000+$0.875
50,000+$0.725
100,000+$0.625
250,000+$0.5875
- +
Ext. Price(USD):$7,280.00
MOQ:6,400
Mult:6,400
SPQ:6,400
Wire-to-Board HDR 2 POS 4.2mm Solder RA Side Entry TH
Pre-order
2,520,000
Factory Lead Time:15 weeks
5,040+$0.3865
- +
Ext. Price(USD):$1,947.96
MOQ:5,040
Mult:5,040
SPQ:1,680
Wire-to-Board Header 18-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$2.0873
- +
Ext. Price(USD):$3,381.42
MOQ:1,620
Mult:1,620
SPQ:540
Wire-to-Board Header 4 POS 3mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.3796
- +
Ext. Price(USD):$1,366.56
MOQ:3,600
Mult:3,600
SPQ:1,200
Pre-order
52,000
Factory Lead Time:22-26 weeks
520+$3.7
1,040+$3.3
5,005+$3.0875
10,010+$2.9
- +
Ext. Price(USD):$1,924.00
MOQ:520
Mult:520
SPQ:520
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.1448
- +
Ext. Price(USD):$9,645.48
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn J.S.T. 08Kr-6S-P, 2mm Pitch, Socket
Available Stock
364
Estimated Ship Time:6-7 working days
20+$0.2702
- +
Ext. Price(USD):$5.40
MOQ:20
Mult:20
Conn Shrouded Header HDR 7 POS 1mm Solder ST Thru-Hole Box
Available Stock
400
Estimated Ship Time:6-7 working days
20+$1.4436
- +
Ext. Price(USD):$28.87
MOQ:20
Mult:20
25 / PageGoto