Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4537
- +
Ext. Price(USD):$1,308.33
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Shrouded Header, HDR, 10 Pos, 5.08mm Pitch, Solder, ST, Thru-Hole, Box
Available Stock
35
Estimated Ship Time:4-6 working days
26+
5+$5.2898
- +
Ext. Price(USD):$26.44
MOQ:5
Mult:5
SPQ:1
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6946
- +
Ext. Price(USD):$1,250.28
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.9923
- +
Ext. Price(USD):$5,393.07
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.8436
- +
Ext. Price(USD):$2,765.40
MOQ:1,500
Mult:1,500
SPQ:500
TSW - Samtec 2.54mm Pin Header 8.51mm Overall Pin Length (05) - Fast Stock
Pre-order
100
Factory Lead Time:8-10 weeks
50+$3.4261
100+$2.9676
57,678+$0.6973
124,711+$0.637
- +
Ext. Price(USD):$250.10
MOQ:73
Mult:1
SPQ:1
Pre-order
132,000
Factory Lead Time:22-26 weeks
1,320+$4
5,005+$3.7375
10,010+$3.5125
- +
Ext. Price(USD):$5,280.00
MOQ:1,320
Mult:1,320
SPQ:1,320
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.297
- +
Ext. Price(USD):$1,167.30
MOQ:900
Mult:900
SPQ:300
14-Pin 2mm BB Receptacle SMD 0.1AU TR W/CP
Pre-order
270,000
Factory Lead Time:22-26 weeks
2,700+$1.5625
5,400+$1.45
10,800+$1.3625
- +
Ext. Price(USD):$4,218.75
MOQ:2,700
Mult:2,700
Conn Shrouded Header (4 Sides) HDR 2 POS 2mm Solder RA Thru-Hole Box
Available Stock
950
Estimated Ship Time:14-17 working days
300+$0.1233
500+$0.1123
10,000+$0.0802
30,000+$0.0791
- +
Ext. Price(USD):$50.05
MOQ:406
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 Pos
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.1248
72,000+$0.1227
120,000+$0.1196
- +
Ext. Price(USD):$2,995.20
MOQ:24,000
Mult:24,000
SPQ:24,000
Conn Wire to Board HDR 10 POS 5.08mm Solder RA Thru-Hole Box
Available Stock
15
Estimated Ship Time:14-17 working days
10+$4.431
50+$3.6347
2,000+$2.5606
4,000+$2.5482
- +
Ext. Price(USD):$53.17
MOQ:12
Mult:1
SPQ:1
Pre-order
480,000
Factory Lead Time:15 weeks
960+$0.5641
- +
Ext. Price(USD):$1,083.07
MOQ:1,920
Mult:960
SPQ:960
Pre-order
400,000
Factory Lead Time:6 weeks
800+$1.5947
- +
Ext. Price(USD):$1,275.76
MOQ:800
Mult:800
SPQ:800
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.9658
- +
Ext. Price(USD):$4,758.96
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Wire Connector Header 17-Pos 1mm IDT Cable Mount Box
Available Stock
1,496
Estimated Ship Time:6-7 working days
22+
20+$0.5159
150+$0.2676
- +
Ext. Price(USD):$10.31
MOQ:20
Mult:20
Two Row Socket Strip
Pre-order
90,000
Factory Lead Time:22-26 weeks
900+$1.45
1,800+$1.3
- +
Ext. Price(USD):$1,305.00
MOQ:900
Mult:900
SPQ:900
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 11 POS 2.5mm Solder RA Side Entry Thru-Hole Box
Available Stock
8
Estimated Ship Time:4-6 working days
18+
1+$0.1696
- +
Ext. Price(USD):$0.16
MOQ:1
Mult:1
SPQ:1
Conn Shrouded Header HDR 6 POS 2.5mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:25-42 weeks
4,500+$0.8127
- +
Ext. Price(USD):$3,657.15
MOQ:4,500
Mult:4,500
SPQ:4,500
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.6779
- +
Ext. Price(USD):$5,613.48
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
2mm Pitch Wafer SMT Header Assembly
Pre-order
195,000
Factory Lead Time:22-26 weeks
1,950+$0.7125
4,550+$0.6375
10,400+$0.625
- +
Ext. Price(USD):$1,389.37
MOQ:1,950
Mult:1,950
JST
Package:SMD,P=2mm
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
1,873
Estimated Ship Time:5-9 working days
22+
5+$0.7336
15+$0.5824
30+$0.5727
- +
Ext. Price(USD):$3.66
MOQ:5
Mult:1
SPQ:500
CONNECTOR, RCPT, 18POS, 1ROW, 2.54MM; Pitch Spacing:2.54mm; No. of Contacts:18Contacts; Gender:Receptacle; Product Range:-; Contact Termination Type:Surface Mount; No. of Rows:1Rows; Contact Plating:Gold Plated Contacts;
Available Stock
363
Estimated Ship Time:6-12 working days
1+$0.97
50+$0.9312
100+$0.8691
200+$0.8691
- +
Ext. Price(USD):$24.25
MOQ:25
Mult:1
Connector Header, Solder Through Hole PCB Mount
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$0.18
25,000+$0.1488
1,000,000+$0.0988
2,000,000+$0.0938
- +
Ext. Price(USD):$3,600.00
MOQ:20,000
Mult:20,000
3.81mm Male Closed Horizontal Wire-to-Board Header
Available Stock
739
Estimated Ship Time:6-12 working days
100+$0.2184
500+$0.2038
1,000+$0.2002
2,500+$0.2002
5,000+$0.2002
- +
Ext. Price(USD):$24.02
MOQ:110
Mult:10
25 / PageGoto