Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Board to Board PL 50 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
90
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 24 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH
Pre-order
315,000
Factory Lead Time:15 weeks
630+$1.4293
- +
Ext. Price(USD):$900.45
MOQ:630
Mult:210
SPQ:210
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9401
- +
Ext. Price(USD):$1,269.13
MOQ:1,350
Mult:450
SPQ:450
JST
ECAD Model:
Shrouded Header HDR 2 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0412
72,000+$0.0405
120,000+$0.0395
- +
Ext. Price(USD):$988.80
MOQ:24,000
Mult:24,000
SPQ:24,000
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$0.7869
- +
Ext. Price(USD):$1,203.95
MOQ:1,530
Mult:1,530
SPQ:510
Molex
ECAD Model:
Conn Board to Board RCP 70 POS 0.5mm Solder ST SMD SlimStack™ T/R
Available Stock
150
Estimated Ship Time:3-5 working days
06+
10+$0.4781
100+$0.47
500+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.806
- +
Ext. Price(USD):$1,209.00
MOQ:1,500
Mult:500
SPQ:500
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3753
- +
Ext. Price(USD):$1,237.77
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 4 Pos 3.5mm Solder ST Top Entry TH Box
Available Stock
1,385
Estimated Ship Time:6-12 working days
50+$0.3875
100+$0.3472
500+$0.341
1,000+$0.3348
5,000+$0.3348
- +
Ext. Price(USD):$24.02
MOQ:62
Mult:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 2mm Solder ST SMD Tube
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.35
- +
Ext. Price(USD):$6,804.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1796
- +
Ext. Price(USD):$2,942.46
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 8 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$0.672
- +
Ext. Price(USD):$1,270.08
MOQ:1,890
Mult:630
SPQ:630
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9192
- +
Ext. Price(USD):$827.28
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.586
- +
Ext. Price(USD):$1,427.40
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Micro-Lock Plus 1.25mm W/B Dual Row Vertical SMT Plug Assembly
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.1625
3,000+$1.1
- +
Ext. Price(USD):$1,743.75
MOQ:1,500
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
Pre-order
1,500,000
Factory Lead Time:22-26 weeks
15,000+$0.1175
30,000+$0.1113
- +
Ext. Price(USD):$1,762.50
MOQ:15,000
Mult:15,000
SPQ:15,000
Molex
ECAD Model:
Pre-order
45,000
Factory Lead Time:22-26 weeks
450+$0.9
1,800+$0.8625
- +
Ext. Price(USD):$405.00
MOQ:450
Mult:450
SPQ:450
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8994
- +
Ext. Price(USD):$1,709.46
MOQ:900
Mult:900
SPQ:450
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Top Entry SMD BergStik® Bag
Pre-order
5,000
Factory Lead Time:10-16 weeks
24+
500+$0.9516
1,000+$0.9267
- +
Ext. Price(USD):$475.80
MOQ:500
Mult:500
SPQ:500
Disconnectable Crimp Style Connectors, 2.5mm Pitch
Available Stock
3,197
Estimated Ship Time:6-7 working days
22+
20+$0.6466
200+$0.2614
- +
Ext. Price(USD):$12.93
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 42 POS 2mm Solder ST Thru-Hole Tube
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$2.125
- +
Ext. Price(USD):$12,495.00
MOQ:5,880
Mult:5,880
SPQ:5,880
PCB Mount Header Right Angle
Pre-order
750,000
Factory Lead Time:22-26 weeks
7,500+$0.2175
15,000+$0.1938
- +
Ext. Price(USD):$1,631.25
MOQ:7,500
Mult:7,500
SPQ:7,500
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 2mm Solder ST Thru-Hole Automotive Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1271
36,000+$0.125
60,000+$0.1218
- +
Ext. Price(USD):$1,525.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Conn Shrouded Header HDR 12 POS 1.27mm Solder RA Side Entry SMD Reel
Available Stock
79
Estimated Ship Time:5-7 working days
2+$10.7414
- +
Ext. Price(USD):$21.48
MOQ:2
Mult:1
JST
ECAD Model:
Conn Shrouded Header HDR 9 POS 2mm Solder RA Thru-Hole Box
Available Stock
5,750
Estimated Ship Time:4-6 working days
250+$0.103
- +
Ext. Price(USD):$25.75
MOQ:250
Mult:250
SPQ:250
25 / PageGoto