Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 44 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
495,000
Factory Lead Time:22-26 weeks
4,950+$2.7
- +
Ext. Price(USD):$13,365.00
MOQ:4,950
Mult:4,950
SPQ:4,950
Wire-to-Board HDR 2 POS 4.2mm Solder RA Side Entry TH
Pre-order
2,520,000
Factory Lead Time:15 weeks
5,040+$0.8287
- +
Ext. Price(USD):$4,176.64
MOQ:5,040
Mult:5,040
SPQ:1,680
JST
ECAD Model:
Conn Shrouded Header HDR 16 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
2,688
Estimated Ship Time:4-6 working days
448+$0.0898
- +
Ext. Price(USD):$40.23
MOQ:448
Mult:448
SPQ:448
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.4864
- +
Ext. Price(USD):$5,383.68
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$5.5135
- +
Ext. Price(USD):$4,465.93
MOQ:810
Mult:270
SPQ:270
Molex
ECAD Model:
Board-to-Board Connector RCP 16 POS 0.5mm Solder ST SMD SlimStack™ T/R
Available Stock
38
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Shrouded Header, Straight, Through Hole
Available Stock
240
Estimated Ship Time:4-6 working days
1+$0.2302
200+$0.1847
- +
Ext. Price(USD):$0.23
MOQ:1
Mult:1
SPQ:200
Crimp Connector, 2-Pitch, Disconnectable
Available Stock
20
Estimated Ship Time:6-7 working days
20+$1.0269
- +
Ext. Price(USD):$20.53
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Board to Board HDR 12 POS 1.27mm Solder RA Side Entry Thru-Hole EXTreme PowerPlus™ Tray
Pre-order
32,000
Factory Lead Time:22-26 weeks
320+$3.725
800+$3.2625
2,000+$3.1875
- +
Ext. Price(USD):$1,192.00
MOQ:320
Mult:320
Conn Shrouded Header HDR 8 POS 2.5mm Solder ST Thru-Hole Bag/Box
Pre-order
120,000
Factory Lead Time:25-42 weeks
1,200+$0.5054
- +
Ext. Price(USD):$606.48
MOQ:1,200
Mult:1,200
SPQ:1,200
JST
ECAD Model:
Board-to-Board Connector HDR 10 Pos 2.5mm Pitch
Pre-order
24,000
Factory Lead Time:18-22 weeks
26+
2,400+$0.1726
7,200+$0.1697
12,000+$0.1654
- +
Ext. Price(USD):$414.24
MOQ:2,400
Mult:2,400
SPQ:2,400
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8096
- +
Ext. Price(USD):$1,092.96
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder RA Thru-Hole Tube
Pre-order
528,000
Factory Lead Time:22-26 weeks
5,280+$1.225
- +
Ext. Price(USD):$6,468.00
MOQ:5,280
Mult:5,280
SPQ:5,280
Conn Mictor SB Connector PL 80 POS 0.8mm Solder ST SMD T/R
Pre-order
105,000
Factory Lead Time:22-26 weeks
1,050+$9.225
5,000+$8.7125
50,000+$7.175
100,000+$6.875
- +
Ext. Price(USD):$9,686.25
MOQ:1,050
Mult:1,050
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.078
- +
Ext. Price(USD):$4,155.30
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector HDR, 10 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$3.3704
- +
Ext. Price(USD):$5,156.71
MOQ:1,530
Mult:1,530
SPQ:510
Wire-to-Board Connector HDR/SKT 2 POS 4mm Solder RA Side Entry SMD Tape
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.9625
50,000+$0.7625
100,000+$0.7375
250,000+$0.6875
- +
Ext. Price(USD):$11,550.00
MOQ:12,000
Mult:12,000
Molex
ECAD Model:
Wire to Board HDR 22 POS 1.25mm Solder ST Top Entry SMD T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$1.8
4,000+$1.575
10,000+$1.5375
- +
Ext. Price(USD):$3,600.00
MOQ:2,000
Mult:2,000
Pre-order
48,000
Factory Lead Time:22-26 weeks
480+$3.6875
960+$3.2875
1,008+$2.6875
5,008+$2.5
10,000+$2.3625
- +
Ext. Price(USD):$1,770.00
MOQ:480
Mult:480
SPQ:480
JST
ECAD Model:
Wire-to-Board Crimp Style Connectors
Available Stock
1,050
Estimated Ship Time:6-7 working days
23+
20+$0.484
625+$0.2509
- +
Ext. Price(USD):$9.68
MOQ:20
Mult:20
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4328
- +
Ext. Price(USD):$1,289.52
MOQ:900
Mult:900
SPQ:300
FFC Connector SKT 28POS 1mm THRU
Available Stock
584
Estimated Ship Time:14-17 working days
50+$0.6946
100+$0.6042
1,000+$0.4317
4,000+$0.426
- +
Ext. Price(USD):$50.01
MOQ:72
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
448,000
Factory Lead Time:22-26 weeks
4,480+$2.2125
- +
Ext. Price(USD):$9,912.00
MOQ:4,480
Mult:4,480
SPQ:4,480
JST
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
Shrouded Header (4 Sides), HDR 2 POS 1.5mm Solder RA Side Entry SMD T/R
Available Stock
21,000
Estimated Ship Time:6-7 working days
26+
1,000+$0.0796
- +
Ext. Price(USD):$79.60
MOQ:1,000
Mult:1,000
Conn Shrouded Header HDR 6 POS 3.81mm Solder ST Thru-Hole Box
Available Stock
280
Estimated Ship Time:14-17 working days
10+$2.3797
30+$1.8111
500+$1.3174
1,000+$1.3104
- +
Ext. Price(USD):$52.35
MOQ:22
Mult:1
SPQ:1
25 / PageGoto