Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
1.0mm Pitch Disconnectable Insulation Displacement Connector
Available Stock
1,500
Estimated Ship Time:14-17 working days
100+$0.4507
300+$0.3918
4,000+$0.3112
5,000+$0.3112
- +
Ext. Price(USD):$50.02
MOQ:111
Mult:1
SPQ:1
Wire-to-Board Connector HDR 10 Pos 4.2mm Solder Top Entry Thru-Hole
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$3.3879
- +
Ext. Price(USD):$5,183.48
MOQ:1,530
Mult:1,530
SPQ:765
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5501
- +
Ext. Price(USD):$742.63
MOQ:1,350
Mult:1,350
SPQ:450
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
525,000
Factory Lead Time:15 weeks
1,050+$7.4164
- +
Ext. Price(USD):$7,787.22
MOQ:1,050
Mult:1,050
SPQ:210
Wire-to-Board Connector Header 8-Pin 3mm Pitch Solder Straight Top Entry TH Tray
Pre-order
1,687,500
Factory Lead Time:15 weeks
3,375+$0.8217
- +
Ext. Price(USD):$2,773.23
MOQ:3,375
Mult:3,375
SPQ:1,125
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors
Available Stock
762
Estimated Ship Time:14-17 working days
100+$0.3137
500+$0.2807
1,000+$0.2718
2,000+$0.2469
4,000+$0.2457
- +
Ext. Price(USD):$50.19
MOQ:160
Mult:1
SPQ:1
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.008
- +
Ext. Price(USD):$1,360.80
MOQ:1,350
Mult:1,350
SPQ:450
Conn Socket Strip SKT 30 POS 2.54mm Solder RA Thru-Hole
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$5.7875
600+$5.175
5,010+$3.6625
10,005+$3.475
25,005+$3.2875
- +
Ext. Price(USD):$1,736.25
MOQ:300
Mult:300
SPQ:300
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Vertical, SMT
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$4.5526
- +
Ext. Price(USD):$27,315.60
MOQ:6,000
Mult:6,000
SPQ:600
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 20 POS 2.54mm Solder RA Thru-Hole C-Grid III™ Tray
Pre-order
144,000
Factory Lead Time:22-26 weeks
1,440+$1.775
2,880+$1.6875
- +
Ext. Price(USD):$2,556.00
MOQ:1,440
Mult:1,440
SPQ:1,440
Molex
ECAD Model:
Pre-order
504,000
Factory Lead Time:22-26 weeks
5,040+$1.175
- +
Ext. Price(USD):$5,922.00
MOQ:5,040
Mult:5,040
SPQ:5,040
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.781
- +
Ext. Price(USD):$1,602.90
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector HDR 24-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1831
- +
Ext. Price(USD):$2,947.18
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Board to Board Connector, 20 Pos, 1mm Pitch, Solder, Straight, SMD, Tube
Available Stock
37
Estimated Ship Time:3-5 working days
10+
10+$0.5433
50+$0.5341
100+$0.5153
- +
Ext. Price(USD):$5.43
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7043
- +
Ext. Price(USD):$1,533.87
MOQ:900
Mult:900
SPQ:300
Pre-order
282,000
Factory Lead Time:22-26 weeks
2,820+$1.825
5,029+$1.7125
10,011+$1.6125
- +
Ext. Price(USD):$5,146.50
MOQ:2,820
Mult:2,820
SPQ:2,820
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,170,000
Factory Lead Time:15 weeks
2,340+$1.6487
- +
Ext. Price(USD):$3,857.95
MOQ:2,340
Mult:2,340
SPQ:2,340
Amphenol
ECAD Model:
BergStik Board-to-Board Connector, Unshrouded Vertical Header, TH, Single Row, Duplex, Polarized, 3 Pos, 2.54mm Pitch
Pre-order
20,000
Factory Lead Time:10-16 weeks
24+
2,000+$0.1496
3,000+$0.1458
- +
Ext. Price(USD):$299.20
MOQ:2,000
Mult:1,000
SPQ:1,000
Conn Shrouded Header HDR 40 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
1,725
Estimated Ship Time:6-7 working days
21+
20+$1.1661
210+$0.4637
- +
Ext. Price(USD):$23.32
MOQ:20
Mult:20
Through-Hole Type Shrouded Header
Available Stock
2,300
Estimated Ship Time:6-7 working days
22+
20+$0.2088
500+$0.0732
- +
Ext. Price(USD):$4.17
MOQ:20
Mult:20
Molex
ECAD Model:
Nano-Fit Right-Angle Header, Through Hole, 2.50mm Pitch, Dual Row
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.7375
4,000+$1.5125
10,000+$1.4875
- +
Ext. Price(USD):$2,606.25
MOQ:1,500
Mult:1,500
JST
ECAD Model:
Conn Shrouded Header HDR 11 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
1,250
Estimated Ship Time:4-6 working days
250+$0.301
- +
Ext. Price(USD):$75.25
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.6382
- +
Ext. Price(USD):$2,211.57
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9471
- +
Ext. Price(USD):$1,136.52
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Vertical, SMT
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$5.3499
- +
Ext. Price(USD):$32,099.40
MOQ:6,000
Mult:6,000
SPQ:600
25 / PageGoto