Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Unshrouded Header, 40-Pos, 2.54mm Pitch, Right Angle Side Entry, Thru-Hole Bulk
Available Stock
73
Estimated Ship Time:9-14 working days
1+$10.725
- +
Ext. Price(USD):$32.17
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
2.00mm Pitch Micro-Lock Plus PCB Header Single Ro
Available Stock
9,900
Estimated Ship Time:7-9 working days
23+
900+$0.66
1,800+$0.649
5,400+$0.594
- +
Ext. Price(USD):$594.00
MOQ:900
Mult:900
SPQ:900
Shrouded Header, HDR, 24 Pos, 2mm, Solder, ST, Thru-Hole, Tube
Available Stock
203
Estimated Ship Time:9-14 working days
1+$19.0404
100+$18.6624
500+$18.2844
1,000+$17.9172
5,000+$17.5608
- +
Ext. Price(USD):$38.08
MOQ:2
Mult:1
SPQ:1
Available Stock
1,230
Estimated Ship Time:6-13 working days
1+$0.322
50+$0.3174
2,000+$0.1242
5,000+$0.1026
- +
Ext. Price(USD):$14.16
MOQ:44
Mult:1
SPQ:1
Available Stock
43
Estimated Ship Time:6-13 working days
1+$4.025
19+$3.795
1,007+$2.4516
2,508+$2.1708
- +
Ext. Price(USD):$16.10
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header SKT 10 POS 2.54mm Solder ST Top Entry Thru-Hole Tube
Available Stock
64
Estimated Ship Time:6-13 working days
1+$2.921
46+$2.7324
2,001+$1.4904
5,014+$1.4256
- +
Ext. Price(USD):$14.60
MOQ:5
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn IDC Connector F 20 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
750
Estimated Ship Time:5-12 working days
100+$1.2705
300+$1.2221
7,500+$1.0165
10,000+$0.9726
- +
Ext. Price(USD):$127.05
MOQ:100
Mult:100
SPQ:100
Conn Socket Strip SKT 3 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
44,359
Estimated Ship Time:6-12 working days
100+$0.1462
200+$0.1271
- +
Ext. Price(USD):$25.00
MOQ:171
Mult:1
Available Stock
320
Estimated Ship Time:5-12 working days
25+$0.8188
250+$0.7007
7,500+$0.6292
10,000+$0.627
- +
Ext. Price(USD):$30.29
MOQ:37
Mult:1
SPQ:1
Terminal Strip Connector, Extreme Power, M, 4Power/32Signal Pos, 12mm/1.27mm Pitch, Solder RA Side Entry, TH, Tray
Available Stock
35
Estimated Ship Time:6-13 working days
1+$13.6275
10+$12.258
256+$10.2276
512+$9.8496
- +
Ext. Price(USD):$27.25
MOQ:2
Mult:1
SPQ:1
Shrouded Header HDR 4 POS 5mm Solder RA Side Entry Thru-Hole
Available Stock
360
Estimated Ship Time:5-12 working days
25+$1.679
100+$1.441
5,000+$1.284
7,500+$1.2733
- +
Ext. Price(USD):$41.97
MOQ:25
Mult:1
SPQ:500
Conn Board Stacker HDR 6 POS 2mm Solder ST Top Entry SMD Bulk
Available Stock
22
Estimated Ship Time:6-13 working days
1+$1.7365
50+$1.331
5,000+$0.526
10,000+$0.4082
- +
Ext. Price(USD):$15.62
MOQ:9
Mult:1
SPQ:1
BKLEV 413 Bueg
Available Stock
500
Estimated Ship Time:7-9 working days
22+
100+$1.463
200+$1.43
400+$1.408
- +
Ext. Price(USD):$146.30
MOQ:100
Mult:1
SPQ:1
multicomp
ECAD Model:
Unshrouded Header, 5-Pos, 2.54mm, Solder RA Side Entry, TH
Available Stock
4,166
Estimated Ship Time:6-12 working days
100+$0.1346
200+$0.1255
- +
Ext. Price(USD):$25.03
MOQ:186
Mult:1
MIL-DTL-55302 Series Connector
Available Stock
28
Estimated Ship Time:9-14 working days
1+$185.0688
100+$181.3644
500+$177.7356
1,000+$174.1824
5,000+$170.7048
- +
Ext. Price(USD):$185.06
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 5 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
173
Estimated Ship Time:6-13 working days
1+$1.8515
50+$1.595
5,000+$0.8424
10,000+$0.8078
- +
Ext. Price(USD):$14.81
MOQ:8
Mult:1
SPQ:1
Wire to Board Connector Header, 8 Pos, Solder RA, Thru-Hole
Available Stock
43
Estimated Ship Time:6-13 working days
1+$10.1315
120+$8.0568
280+$7.884
520+$7.8408
1,000+$7.3764
- +
Ext. Price(USD):$20.26
MOQ:2
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 28 Pos 2.54mm IDT RA Cable Mount
Available Stock
745
Estimated Ship Time:5-12 working days
10+$5.1175
250+$4.7508
2,250+$1.7655
3,000+$1.7227
- +
Ext. Price(USD):$51.17
MOQ:10
Mult:1
SPQ:100
Molex
ECAD Model:
Molex 3.0mm Pitch 10-Pin Double Row Header, Micro-Fit+ Series, Vertical, TH
Available Stock
332
Estimated Ship Time:7-9 working days
20+
48+$2.464
150+$2.409
250+$2.376
- +
Ext. Price(USD):$118.27
MOQ:48
Mult:1
SPQ:1
Connector Board Stacker HDR 16 POS 2mm Solder ST Top Entry TH
Available Stock
38
Estimated Ship Time:6-13 working days
1+$3.5305
50+$2.9376
2,000+$1.8576
5,000+$1.6524
- +
Ext. Price(USD):$14.12
MOQ:4
Mult:1
SPQ:1
Unshrouded Header HDR 100 POS 2.54mm Solder RA Side Entry Thru-Hole Bulk
Available Stock
60
Estimated Ship Time:6-13 working days
1+$4.8185
25+$4.3632
1,000+$3.2832
2,500+$3.0456
- +
Ext. Price(USD):$14.45
MOQ:3
Mult:1
SPQ:1
RS PRO
ECAD Model:
RS PRO IDC Receptacle, 10 Pos, 2 Rows, 2.54mm Pitch, Wire Mount
Available Stock
8,891
Estimated Ship Time:5-10 working days
1+$2.3198
25+$2.2816
75+$2.2178
200+$2.1669
1,000+$1.7845
- +
Ext. Price(USD):$6.95
MOQ:3
Mult:1
Conn Board Stacker HDR 40 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
32
Estimated Ship Time:6-13 working days
1+$4.416
25+$4.158
1,000+$2.8728
2,500+$2.6136
- +
Ext. Price(USD):$17.66
MOQ:4
Mult:1
SPQ:1
CONEC
ECAD Model:
Header & Housing, 4-Pin DIP, Gold Plated
Available Stock
280
Estimated Ship Time:7-9 working days
18+
50+$2.332
150+$2.233
- +
Ext. Price(USD):$116.60
MOQ:50
Mult:1
SPQ:1
Connector Board Stacker HDR 60 Pos 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
17
Estimated Ship Time:7-9 working days
22+
1+$9.845
10+$9.405
1,000+$4.125
2,000+$3.168
- +
Ext. Price(USD):$39.38
MOQ:4
Mult:1
SPQ:1
25 / PageGoto