Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
multicomp
ECAD Model:
WTB CONN, HEADER, 3POS, 1ROW, 2MM;
Available Stock
4,156
Estimated Ship Time:6-12 working days
200+$0.0381
- +
Ext. Price(USD):$25.03
MOQ:657
Mult:1
Conn Board Stacker HDR 20 POS 2mm Solder ST Top Entry SMD Tube
Available Stock
198
Estimated Ship Time:6-13 working days
1+$4.1745
28+$3.839
504+$3.1212
1,008+$2.5596
2,520+$2.2572
- +
Ext. Price(USD):$16.69
MOQ:4
Mult:1
SPQ:1
Conn Wire-to-Board PL 26 POS 1.27mm Solder RA Thru-Hole
Available Stock
343
Estimated Ship Time:9-14 working days
2+$134.73
10+$132.0408
20+$129.3948
100+$126.8136
500+$124.2756
- +
Ext. Price(USD):$269.46
MOQ:2
Mult:2
SPQ:1
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors
Available Stock
79
Estimated Ship Time:6-13 working days
10+$0.9637
25+$0.9246
100+$0.6105
2,500+$0.581
5,000+$0.5659
- +
Ext. Price(USD):$14.45
MOQ:15
Mult:1
SPQ:1
Phoenix Contact 0.8mm Pitch 32-Pin Dual Row Receptacle, SMD
Available Stock
378
Estimated Ship Time:9-14 working days
1+$13.39
- +
Ext. Price(USD):$26.78
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Socket Strip RCP 9 POS 2.54mm Solder ST Thru-Hole KK® Tray
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Shrouded Header (4 Sides) HDR 8 Pos 5.08mm Solder ST Thru-Hole
Available Stock
391
Estimated Ship Time:5-12 working days
100+$1.1561
300+$1.1385
7,500+$1.0293
10,000+$1.0272
- +
Ext. Price(USD):$115.61
MOQ:100
Mult:100
SPQ:100
Wurth Elektronik 2.54mm Pitch 24-Pin Single Row Header THT Female WR-PHD Series Straight TH
Available Stock
705
Estimated Ship Time:5-10 working days
5+$1.7437
30+$1.7054
60+$1.6723
- +
Ext. Price(USD):$8.71
MOQ:5
Mult:5
Shrouded Header Connector, HDR 6 Pos, 5.08mm Pitch, Solder RA Thru-Hole
Available Stock
500
Estimated Ship Time:6-13 working days
1+$1.886
10+$1.6905
2,500+$1.0292
5,000+$1.0022
- +
Ext. Price(USD):$15.08
MOQ:8
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 6 POS 5.08mm Solder RA Side Entry Thru-Hole Box
Available Stock
54
Estimated Ship Time:6-13 working days
10+$1.2535
25+$1.0902
432+$0.6588
1,080+$0.6361
- +
Ext. Price(USD):$15.04
MOQ:12
Mult:1
SPQ:1
PCB Mount Header Vertical 9 Position 5 mm [.197 in] Centerline Fully Shrouded Tin (Sn) Through Hole - Solder Signal AMP Signal Double Lock
Available Stock
16,800
Estimated Ship Time:7-9 working days
22+
209+$0.528
340+$0.517
680+$0.506
1,360+$0.495
10,000+$0.385
- +
Ext. Price(USD):$110.35
MOQ:209
Mult:1
SPQ:1
Unshrouded Header HDR 40 POS 2.54mm Solder Straight Thru-Hole
Available Stock
271
Estimated Ship Time:6-13 working days
1+$1.725
- +
Ext. Price(USD):$15.52
MOQ:9
Mult:1
SPQ:1
PCB SOCKET, SINGLE ROW, 16 PIN,
Available Stock
845
Estimated Ship Time:9-14 working days
1+$1.3716
500+$1.1448
1,000+$0.9158
1,500+$0.7785
2,000+$0.6869
- +
Ext. Price(USD):$26.06
MOQ:19
Mult:1
SPQ:1
Headers and PCB Receptacles, Micro Connectors
Available Stock
20,488
Estimated Ship Time:7-9 working days
16+
1,600+$0.0715
3,900+$0.0704
7,700+$0.0682
12,000+$0.066
- +
Ext. Price(USD):$114.40
MOQ:1,600
Mult:1
SPQ:1
.150 Power Strip/20 A Dual Blade Socket Strip
Available Stock
20
Estimated Ship Time:9-14 working days
1+$11.1024
10+$9.437
- +
Ext. Price(USD):$33.30
MOQ:3
Mult:1
SPQ:1
FLEXIBLE MICRO BOARD STACKING HE
Available Stock
12
Estimated Ship Time:9-14 working days
1+$6.8472
10+$6.7813
- +
Ext. Price(USD):$27.38
MOQ:4
Mult:1
SPQ:1
CONN SOCKET 46POS .100" GOLD PCB
Available Stock
522
Estimated Ship Time:9-14 working days
1+$1.4148
100+$1.3068
1,000+$1.188
10,000+$0.864
- +
Ext. Price(USD):$26.88
MOQ:19
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR 8 POS 2.54mm Solder Straight Top Entry Thru-Hole Tube
Available Stock
49
Estimated Ship Time:6-13 working days
1+$3.841
56+$2.9376
1,008+$2.0952
2,016+$1.8576
- +
Ext. Price(USD):$15.36
MOQ:4
Mult:1
SPQ:1
Conn Board Stacker HDR 12 POS 1.27mm Solder ST Top Entry SMD FLEX STACK™
Available Stock
150
Estimated Ship Time:6-13 working days
1+$2.7025
50+$2.178
2,052+$1.3716
5,016+$1.1124
- +
Ext. Price(USD):$16.21
MOQ:6
Mult:1
SPQ:1
Conn Unshrouded Header HDR 20 POS 2.54mm Solder ST Top Entry Thru-Hole Bag
Available Stock
49,600
Estimated Ship Time:7-10 working days
23+
80+$0.737
400+$0.726
800+$0.715
1,600+$0.704
4,000+$0.638
- +
Ext. Price(USD):$58.96
MOQ:80
Mult:1
SPQ:1
Available Stock
53
Estimated Ship Time:6-13 working days
1+$2.1045
50+$1.837
2,000+$1.4472
5,000+$1.35
- +
Ext. Price(USD):$14.73
MOQ:7
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Unshrouded Header HDR 7 POS 5.08mm Solder ST Thru-Hole
Available Stock
78
Estimated Ship Time:6-13 working days
1+$3.013
50+$2.376
2,000+$1.8252
5,000+$1.6416
- +
Ext. Price(USD):$15.06
MOQ:5
Mult:1
SPQ:1
Conn Shrouded Header HDR 20 POS 2mm Solder ST Thru-Hole Tube
Available Stock
44
Estimated Ship Time:6-13 working days
1+$3.887
57+$3.2832
1,007+$2.6568
2,014+$2.6028
- +
Ext. Price(USD):$15.54
MOQ:4
Mult:1
SPQ:1
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Available Stock
445
Estimated Ship Time:6-13 working days
10+$0.8832
25+$0.8476
2,400+$0.5044
4,800+$0.4957
- +
Ext. Price(USD):$14.13
MOQ:16
Mult:1
SPQ:1
Conn Board Stacker HDR 50 POS 2.54mm Solder ST Top Entry Thru-Hole FLEX STACK
Available Stock
1,405
Estimated Ship Time:7-9 working days
22+
1+$6.424
25+$6.061
2,500+$2.761
5,000+$2.178
- +
Ext. Price(USD):$32.12
MOQ:5
Mult:1
SPQ:1
25 / PageGoto