Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Wire to Board HDR 3 POS 3.5mm Solder RA Thru-Hole Carton
Available Stock
45
Estimated Ship Time:5-12 working days
4+$3.841
50+$3.487
1,000+$0.856
2,500+$0.8132
- +
Ext. Price(USD):$30.72
MOQ:8
Mult:1
SPQ:100
Conn Unshrouded Header HDR 4 POS 2.54mm Solder RA Side Entry SMD T/R
Available Stock
325
Estimated Ship Time:6-13 working days
1+$1.15
50+$0.6413
5,000+$0.4342
10,000+$0.3456
- +
Ext. Price(USD):$14.95
MOQ:13
Mult:1
SPQ:1
WAGO
ECAD Model:
Available Stock
400
Estimated Ship Time:4-7 working days
100+$1.1915
500+$1.1717
1,000+$1.1419
10,000+$1.122
- +
Ext. Price(USD):$119.15
MOQ:100
Mult:100
SPQ:100
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2.54mm Solder RA Thru-Hole H-DAC 64 Automotive Tube
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Amphenol
ECAD Model:
Card Edge Connector F, 38 POS, 0.6mm, Solder RA, SMD, T/R
Available Stock
63
Estimated Ship Time:6-13 working days
1+$5.8535
10+$4.763
500+$3.4776
1,350+$3.3912
- +
Ext. Price(USD):$17.56
MOQ:3
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) M 3 POS 5mm Solder ST Top Entry Thru-Hole
Available Stock
751
Estimated Ship Time:5-12 working days
50+$0.5307
500+$0.4485
10,000+$0.3614
15,000+$0.3514
- +
Ext. Price(USD):$30.24
MOQ:57
Mult:1
SPQ:1
Conn Board Stacker HDR 2 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
974
Estimated Ship Time:7-9 working days
20+
100+$0.2288
500+$0.1826
- +
Ext. Price(USD):$30.20
MOQ:132
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 8 POS 1mm Solder ST Top Entry SMD Micro Mate™ Bulk
Available Stock
768
Estimated Ship Time:6-13 working days
1+$2.1045
50+$1.991
1,050+$1.4256
4,725+$1.2204
- +
Ext. Price(USD):$14.73
MOQ:7
Mult:1
SPQ:1
Conn Board to Board SKT 30 POS 0.4mm Solder ST Top Entry SMD T/R
Available Stock
2,947
Estimated Ship Time:9-14 working days
10+$1.445
25+$1.3539
500+$1.0957
1,000+$1.0435
- +
Ext. Price(USD):$26.01
MOQ:18
Mult:1
SPQ:1
Conn IDC Connector F 12 POS 2.54mm IDT RA Side Entry Cable Mount MAS-CON®
Available Stock
658
Estimated Ship Time:5-12 working days
100+$1.0058
300+$0.957
7,500+$0.7479
10,000+$0.673
- +
Ext. Price(USD):$100.58
MOQ:100
Mult:100
SPQ:100
OUPIIN
ECAD Model:
Shrouded Header HDR 40 POS 2.54mm Solder ST Thru-Hole Tray
Available Stock
961
Estimated Ship Time:5-12 working days
80+$0.6774
160+$0.6272
240+$0.6105
- +
Ext. Price(USD):$54.19
MOQ:80
Mult:80
SPQ:80
Amphenol
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 3.5mm Solder ST Top Entry Thru-Hole
Available Stock
7,627
Estimated Ship Time:7-9 working days
16+
200+$0.605
500+$0.583
2,000+$0.561
5,200+$0.539
- +
Ext. Price(USD):$121.00
MOQ:200
Mult:1
SPQ:1
Conn Socket Strip RCP 2 POS 2.54mm Solder RA SMD T/R
Available Stock
2,100
Estimated Ship Time:7-9 working days
22+
2,100+$0.66
- +
Ext. Price(USD):$1,386.00
MOQ:2,100
Mult:2,100
SPQ:2,100
Conn Shrouded Header HDR 50 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
168
Estimated Ship Time:7-9 working days
19+
49+$2.288
- +
Ext. Price(USD):$112.11
MOQ:49
Mult:1
SPQ:1
TERM BLOCK HDR 8POS 5MM
Available Stock
100
Estimated Ship Time:9-14 working days
10+$1.89
25+$1.6476
1,000+$1.0806
5,000+$0.9799
- +
Ext. Price(USD):$26.46
MOQ:14
Mult:1
SPQ:1
Pancon
ECAD Model:
Unshrouded Header, 36 Pos, 2.54mm Pitch, Solder RA Thru-Hole
Available Stock
542
Estimated Ship Time:5-12 working days
100+$2.827
300+$2.6322
7,500+$2.1293
10,000+$1.9153
- +
Ext. Price(USD):$282.70
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 7 POS 3.96mm Solder ST SMD Tube
Available Stock
234
Estimated Ship Time:6-13 working days
1+$3.3235
60+$3.0996
2,000+$1.7712
5,000+$1.5984
- +
Ext. Price(USD):$16.61
MOQ:5
Mult:1
SPQ:1
Spring Loaded Connector HDR, 2 Pos, 2.54mm, Solder RA Top Entry, SMD, T/R
Available Stock
1,700
Estimated Ship Time:6-13 working days
1+$5.0715
10+$4.411
1,000+$2.7756
2,500+$2.6676
- +
Ext. Price(USD):$15.21
MOQ:3
Mult:1
SPQ:1
Available Stock
372
Estimated Ship Time:6-13 working days
1+$15.916
10+$14.4396
250+$10.476
575+$9.8712
- +
Ext. Price(USD):$15.91
MOQ:1
Mult:1
SPQ:1
Shrouded Header (4 Sides) HDR 20 POS 1.27mm Solder ST SMD Tube
Available Stock
15
Estimated Ship Time:6-13 working days
1+$9.798
10+$9.35
525+$6.3828
1,015+$6.2424
- +
Ext. Price(USD):$19.59
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Available Stock
151,200
Estimated Ship Time:5-12 working days
283+$0.4301
1,415+$0.4055
2,829+$0.3809
14,141+$0.3692
42,421+$0.3531
- +
Ext. Price(USD):$258.06
MOQ:600
Mult:600
SPQ:600
Pancon
ECAD Model:
Conn Unshrouded Header HDR 4 POS 2.54mm Solder RA Thru-Hole Bag
Available Stock
868
Estimated Ship Time:5-12 working days
500+$0.3972
1,000+$0.3882
15,000+$0.2431
25,000+$0.2249
- +
Ext. Price(USD):$198.60
MOQ:500
Mult:500
SPQ:500
PIN HEADER, DOUBLE ROW, 10 PIN,
Available Stock
4,749
Estimated Ship Time:9-14 working days
1+$0.6156
1,000+$0.513
2,000+$0.4104
3,000+$0.3488
4,000+$0.3078
- +
Ext. Price(USD):$26.47
MOQ:43
Mult:1
SPQ:1
Conn Unshrouded Header HDR 6 POS 3.96mm Solder ST Thru-Hole Bulk
Available Stock
120
Estimated Ship Time:6-13 working days
1+$2.3345
50+$2.1816
2,000+$1.3716
5,000+$1.2636
- +
Ext. Price(USD):$14.00
MOQ:6
Mult:1
SPQ:1
multicomp
ECAD Model:
Wire-to-Board HDR 5 Pos 2.54mm Solder ST Top Entry TH
Available Stock
68,094
Estimated Ship Time:6-12 working days
200+$0.0679
- +
Ext. Price(USD):$25.05
MOQ:369
Mult:1
25 / PageGoto