Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Amphenol
Package:SMD,P=1mm
ECAD Model:
Available Stock
1,280
Estimated Ship Time:7-9 working days
23+
320+$4.565
640+$4.147
- +
Ext. Price(USD):$1,460.80
MOQ:320
Mult:320
SPQ:320
Unshrouded Header, 4 Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole
Available Stock
445
Estimated Ship Time:6-13 working days
1+$0.6555
50+$0.6171
2,000+$0.2462
5,000+$0.1804
- +
Ext. Price(USD):$14.42
MOQ:22
Mult:1
SPQ:1
Conn Open Pin Field Array HDR 560 POS 1.27mm Solder ST Top Entry SMD SEARAY™ T/R
Available Stock
145
Estimated Ship Time:6-13 working days
1+$55.066
10+$51.6996
100+$41.0184
175+$41.0076
- +
Ext. Price(USD):$55.06
MOQ:1
Mult:1
SPQ:1
Samtec
ECAD Model:
ASP
Available Stock
42
Estimated Ship Time:9-14 working days
1+$42.8868
10+$38.4156
25+$35.9856
50+$30.3264
100+$27.675
- +
Ext. Price(USD):$42.88
MOQ:1
Mult:1
SPQ:1
Pancon
ECAD Model:
Unshrouded Header HDR 36 POS 2.54mm Solder ST Thru-Hole Bag
Available Stock
2,618
Estimated Ship Time:5-12 working days
100+$1.903
300+$1.8083
7,500+$1.5836
10,000+$1.3589
- +
Ext. Price(USD):$190.30
MOQ:100
Mult:100
SPQ:100
Conn Board Stacker HDR 8 POS 2mm Solder ST Top Entry SMD T/R
Available Stock
500
Estimated Ship Time:5-12 working days
25+$2.7406
250+$1.4608
7,500+$0.9127
10,000+$0.9106
- +
Ext. Price(USD):$68.51
MOQ:25
Mult:1
SPQ:1
Samtec
ECAD Model:
Unshrouded Header HDR, 4 Pos, 2.54mm Pitch, Solder ST Top Entry Thru-Hole
Available Stock
83
Estimated Ship Time:6-13 working days
1+$3.381
100+$2.3868
500+$2.3544
1,000+$1.9872
2,000+$1.9224
- +
Ext. Price(USD):$16.90
MOQ:5
Mult:1
SPQ:1
Colibri Receptacle 440
Available Stock
70
Estimated Ship Time:5-10 working days
1+$22.9941
10+$21.1331
25+$18.6094
- +
Ext. Price(USD):$22.99
MOQ:1
Mult:1
MIL-DTL-55302 Series Connector
Available Stock
28
Estimated Ship Time:9-14 working days
1+$97.1352
100+$95.1912
500+$93.2904
1,000+$91.422
5,000+$89.5968
- +
Ext. Price(USD):$97.13
MOQ:1
Mult:1
SPQ:1
Conn Socket Strip SKT 26 POS 2mm Solder ST Top Entry SMD TIGER CLAW™ Tube
Available Stock
16
Estimated Ship Time:6-13 working days
1+$3.9675
22+$3.443
1,012+$2.754
2,508+$2.6676
- +
Ext. Price(USD):$15.87
MOQ:4
Mult:1
SPQ:1
Pancon
ECAD Model:
Conn Wire to Board HDR 10 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
1,959
Estimated Ship Time:5-12 working days
50+$1.3082
250+$1.2815
2,250+$0.6046
3,000+$0.5917
- +
Ext. Price(USD):$65.41
MOQ:50
Mult:1
SPQ:100
Pancon
ECAD Model:
Conn IDC Connector F 2 POS 3.96mm IDT RA Cable Mount Automotive Bag
Available Stock
550
Estimated Ship Time:5-12 working days
500+$0.3753
1,000+$0.3743
15,000+$0.274
25,000+$0.2628
- +
Ext. Price(USD):$187.65
MOQ:500
Mult:500
SPQ:500
Samtec
ECAD Model:
Socket Strip, SKT, 16 POS, 2.54mm, Solder, ST, Top Entry, Thru-Hole
Available Stock
250
Estimated Ship Time:7-9 working days
17+
27+$7.073
54+$6.82
108+$5.203
- +
Ext. Price(USD):$190.97
MOQ:27
Mult:27
SPQ:27
Connector Board Stacker HDR 36 1mm Solder Straight Surface Mount
Available Stock
9
Estimated Ship Time:6-13 working days
1+$10.35
10+$9.856
256+$8.0244
512+$7.5924
- +
Ext. Price(USD):$20.70
MOQ:2
Mult:1
SPQ:1
Available Stock
356
Estimated Ship Time:6-13 working days
1+$0.9085
50+$0.6787
5,000+$0.2527
10,000+$0.2506
- +
Ext. Price(USD):$14.53
MOQ:16
Mult:1
SPQ:1
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 4POS, 1ROW, 2MM;
Available Stock
3,860
Estimated Ship Time:6-12 working days
200+$0.052
- +
Ext. Price(USD):$25.01
MOQ:481
Mult:1
Automotive Connectors 10POS TAB0.64X0.64 HDR ASSY 180DEG SLDR
Available Stock
3,024
Estimated Ship Time:7-9 working days
22+
50+$2.376
150+$2.332
250+$2.288
500+$2.244
800+$2.2
- +
Ext. Price(USD):$118.80
MOQ:50
Mult:1
SPQ:1
Unshrouded Header, 30 POS, 2.54mm Pitch, Solder, ST, Top Entry, TH, Bulk
Available Stock
141
Estimated Ship Time:9-14 working days
1+$10.023
- +
Ext. Price(USD):$30.06
MOQ:3
Mult:1
SPQ:1
Conn Micro Socket Strip SKT 4 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
25
Estimated Ship Time:6-13 working days
1+$1.334
50+$1.122
5,000+$0.6026
10,000+$0.54
- +
Ext. Price(USD):$14.67
MOQ:11
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Unshrouded Header HDR 17 POS 3.96mm Solder ST Top Entry Thru-Hole KK® Bag
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Unshrouded Header, 2 Pos, 3.96mm Pitch, Solder, ST, SMD Layer
Available Stock
295
Estimated Ship Time:6-13 working days
1+$0.8395
50+$0.7975
5,000+$0.3802
10,000+$0.3229
- +
Ext. Price(USD):$14.27
MOQ:17
Mult:1
SPQ:1
Samtec
ECAD Model:
PCB Connector
Available Stock
78
Estimated Ship Time:7-9 working days
16+
12+$17.226
36+$16.5
- +
Ext. Price(USD):$206.71
MOQ:12
Mult:12
SPQ:12
Available Stock
73
Estimated Ship Time:5-12 working days
10+$2.3
50+$2.128
1,000+$0.5269
2,500+$0.4869
- +
Ext. Price(USD):$32.20
MOQ:14
Mult:1
SPQ:100
Pancon
ECAD Model:
Conn IDC Connector F 3 POS 3.96mm IDT RA Cable Mount Bag
Available Stock
2,821
Estimated Ship Time:5-12 working days
500+$0.3361
1,000+$0.3157
25,000+$0.1992
50,000+$0.1987
- +
Ext. Price(USD):$168.05
MOQ:500
Mult:500
SPQ:500
Conn Socket Strip RCP 16 POS 0.64mm Solder RA Side Entry SMD TIGER EYE™ Bulk
Available Stock
450
Estimated Ship Time:7-9 working days
17+
44+$6.468
88+$6.237
1,012+$3.377
2,024+$2.42
- +
Ext. Price(USD):$284.59
MOQ:44
Mult:44
SPQ:44
25 / PageGoto