Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Board Stacker HDR 20 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
32
Estimated Ship Time:6-13 working days
1+$4.7265
50+$3.6504
1,000+$3.0888
2,500+$2.8512
- +
Ext. Price(USD):$14.17
MOQ:3
Mult:1
SPQ:1
Lumberg
ECAD Model:
Lumberg Minimodul Wire-to-Board Connector, 2.5mm Pitch, 6-Pin Header, Right Angle, TH
Available Stock
540
Estimated Ship Time:5-10 working days
10+$0.5787
70+$0.5698
130+$0.557
- +
Ext. Price(USD):$11.57
MOQ:20
Mult:10
Shrouded Header HDR 40 POS 1.27mm Solder ST Thru-Hole Bulk
Available Stock
11
Estimated Ship Time:7-9 working days
17+
1+$15.015
10+$13.871
- +
Ext. Price(USD):$30.03
MOQ:2
Mult:1
SPQ:1
Unshrouded Header, HDR, 36 POS, 2.54mm, Solder, ST, Top Entry, TH, Bulk
Available Stock
20
Estimated Ship Time:6-13 working days
1+$3.2545
50+$2.7432
2,000+$1.6632
5,000+$1.5336
- +
Ext. Price(USD):$16.27
MOQ:5
Mult:1
SPQ:1
Conn Shrouded Header (3 Sides) HDR 20 POS 2mm Solder RA SMD Tube
Available Stock
39
Estimated Ship Time:9-14 working days
1+$4.4712
25+$4.047
50+$3.7595
100+$3.5813
500+$3.537
- +
Ext. Price(USD):$26.82
MOQ:6
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Shrouded Header HDR 6 POS 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Available Stock
2,026
Estimated Ship Time:9-14 working days
10+$1.5541
100+$1.3204
- +
Ext. Price(USD):$26.41
MOQ:17
Mult:1
SPQ:1
Available Stock
305
Estimated Ship Time:5-12 working days
10+$5.0485
50+$3.927
2,500+$3.1779
5,000+$3.1351
- +
Ext. Price(USD):$50.48
MOQ:10
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Board to Board RCP 160 POS 0.635mm Solder ST SMD SlimStack™ Tube
Available Stock
954
Estimated Ship Time:7-9 working days
19+
27+$2.222
300+$2.145
600+$2.057
- +
Ext. Price(USD):$59.99
MOQ:27
Mult:1
SPQ:1
Conn Wire to Board HDR 10 POS 2.54mm Solder ST Top Entry Thru-Hole Mini Mate® Tube
Available Stock
200
Estimated Ship Time:5-12 working days
40+$5.07
80+$5.0574
2,520+$2.4343
5,000+$2.3759
- +
Ext. Price(USD):$202.80
MOQ:40
Mult:40
SPQ:40
Amphenol
ECAD Model:
Available Stock
679
Estimated Ship Time:6-13 working days
1+$14.03
10+$11.1996
460+$8.8668
920+$8.8128
- +
Ext. Price(USD):$14.03
MOQ:1
Mult:1
SPQ:1
Unshrouded Header, 14 Pos, 2.54mm, Solder, ST, Top Entry, SMD, T/R
Available Stock
49
Estimated Ship Time:6-13 working days
1+$4.5885
25+$4.257
900+$3.4236
2,400+$3.1644
- +
Ext. Price(USD):$18.35
MOQ:4
Mult:1
SPQ:1
Conn Socket Strip RCP 20 POS 1.27mm Solder ST Top Entry Thru-Hole
Available Stock
1,104
Estimated Ship Time:6-12 working days
25+$0.7551
50+$0.6833
100+$0.6513
- +
Ext. Price(USD):$26.42
MOQ:35
Mult:5
.250 Inch Connector, 40A High-Power Socket Strip
Available Stock
45
Estimated Ship Time:6-13 working days
1+$10.488
10+$9.867
528+$6.48
1,008+$6.3396
- +
Ext. Price(USD):$20.97
MOQ:2
Mult:1
SPQ:1
Conn Socket Strip SKT 1 POS Press Fit ST Top Entry Thru-Hole Bulk
Available Stock
300
Estimated Ship Time:6-13 working days
1+$1.1615
50+$1.0659
5,000+$0.6329
10,000+$0.5918
- +
Ext. Price(USD):$15.09
MOQ:13
Mult:1
SPQ:1
Header HDR 20 POS 2mm Solder ST Thru-Hole Bulk
Available Stock
354
Estimated Ship Time:6-13 working days
1+$6.187
25+$5.5188
50+$4.536
100+$4.2984
500+$3.9636
- +
Ext. Price(USD):$18.56
MOQ:3
Mult:1
SPQ:1
Conn Board Stacker HDR 46 POS 2.54mm Solder ST Top Entry SMD
Available Stock
14
Estimated Ship Time:6-13 working days
1+$8.418
27+$7.1496
504+$5.3892
1,008+$5.346
- +
Ext. Price(USD):$16.83
MOQ:2
Mult:1
SPQ:1
Conn Board Stacker HDR 30 POS 2mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
3
Estimated Ship Time:6-13 working days
1+$5.589
25+$4.7628
500+$4.1148
1,000+$3.9204
- +
Ext. Price(USD):$16.76
MOQ:3
Mult:1
SPQ:1
Pancon
ECAD Model:
Ejector Header HDR 26 POS 2.54mm Solder RA Thru-Hole Tray
Available Stock
7
Estimated Ship Time:5-12 working days
5+$4.646
50+$3.982
2,500+$2.675
5,000+$2.14
- +
Ext. Price(USD):$32.52
MOQ:7
Mult:1
SPQ:100
Conn Isolated Power Socket SKT 18Power POS 4.19mm Solder ST Top Entry Thru-Hole Power Mate® Tube
Available Stock
24
Estimated Ship Time:6-13 working days
1+$3.841
22+$3.663
1,001+$2.5272
2,508+$2.3436
- +
Ext. Price(USD):$15.36
MOQ:4
Mult:1
SPQ:1
Conn Socket Strip SKT 10 POS 1.27mm Solder ST Top Entry SMD TIGER EYE™
Available Stock
13
Estimated Ship Time:6-13 working days
1+$4.692
25+$3.971
1,026+$3.0672
2,508+$2.9052
- +
Ext. Price(USD):$14.07
MOQ:3
Mult:1
SPQ:1
Conn Socket Strip SKT 24 POS 2.54mm Solder ST Top Entry Thru-Hole Bulk
Available Stock
35
Estimated Ship Time:6-13 working days
1+$5.014
25+$4.6008
1,000+$3.1536
2,500+$2.6028
- +
Ext. Price(USD):$15.04
MOQ:3
Mult:1
SPQ:1
Conn Extreme Power Terminal Strip M 2Power/16Signal POS 12mm/1.27mm Solder RA Side Entry Thru-Hole Tray
Available Stock
139
Estimated Ship Time:6-13 working days
1+$11.5
10+$10.461
112+$8.9748
1,008+$6.9012
- +
Ext. Price(USD):$23.00
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch Click Mate PCB Receptacle Single Row SMD Tin Plated Positive Lock Pick & Place Polyimide Tape 13 Circuits Black
Available Stock
50
Estimated Ship Time:9-14 working days
50+$10.8
100+$10.584
500+$10.3723
1,000+$10.1649
5,000+$9.9616
- +
Ext. Price(USD):$540.00
MOQ:50
Mult:50
SPQ:1
Minitek PWR 3.0 Wire-to-Board Connector Receptacle
Available Stock
2,120
Estimated Ship Time:6-13 working days
25+$0.3151
100+$0.2737
3,000+$0.1771
6,000+$0.1609
- +
Ext. Price(USD):$14.17
MOQ:45
Mult:1
SPQ:1
Conn Board Stacker HDR, 16 POS, 0.8mm, Solder, ST, SMD, Tube
Available Stock
81
Estimated Ship Time:6-13 working days
1+$6.2215
25+$5.2812
546+$4.4172
1,001+$4.0392
- +
Ext. Price(USD):$18.66
MOQ:3
Mult:1
SPQ:1
25 / PageGoto