Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Wire-to-Board Connector RCP 7 Pos 1.5mm Solder Straight Thru-Hole Tray
Available Stock
5,940
Estimated Ship Time:7-9 working days
20+
650+$0.0924
3,300+$0.0891
- +
Ext. Price(USD):$60.06
MOQ:650
Mult:1
SPQ:1
Adam Tech
ECAD Model:
Conn Unshrouded Header HDR 2 POS 2.54mm Solder ST Top Entry Thru-Hole Bag
Available Stock
18,658
Estimated Ship Time:6-13 working days
250+$0.0311
1,000+$0.023
2,000+$0.0209
6,000+$0.0184
10,000+$0.0151
- +
Ext. Price(USD):$14.02
MOQ:451
Mult:1
SPQ:1
Unshrouded Header, 9 Pos, 2mm Pitch, Solder RA Thru-Hole
Available Stock
2,282
Estimated Ship Time:9-14 working days
100+$0.2446
500+$0.2183
1,000+$0.2078
5,000+$0.1855
10,000+$0.1767
- +
Ext. Price(USD):$26.17
MOQ:107
Mult:1
SPQ:1
Connector Header Surface Mount Right Angle 5 position 0.049 (1.25mm)
Available Stock
490
Estimated Ship Time:7-9 working days
23+
186+$0.594
- +
Ext. Price(USD):$110.48
MOQ:186
Mult:1
SPQ:1
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 3 POS 2mm Solder ST Thru-Hole
Available Stock
15,959
Estimated Ship Time:7-9 working days
23+
269+$0.2167
3,000+$0.209
6,000+$0.2002
- +
Ext. Price(USD):$58.29
MOQ:269
Mult:1
SPQ:1
Harwin
ECAD Model:
Board to Board Connector, Female, 9 Pos, 1mm Pitch, Solder, ST, SMD, T/R
Available Stock
1,790
Estimated Ship Time:7-9 working days
10+
500+$1.023
1,000+$1.001
- +
Ext. Price(USD):$511.50
MOQ:500
Mult:500
SPQ:500
Available Stock
22
Estimated Ship Time:6-13 working days
1+$10.281
10+$9.196
510+$6.7284
1,005+$6.2208
- +
Ext. Price(USD):$20.56
MOQ:2
Mult:1
SPQ:1
Board to Board Receptacle AMPMODU 2mm
Available Stock
4,200
Estimated Ship Time:7-9 working days
21+
80+$2.585
200+$2.541
320+$2.497
520+$2.453
2,000+$2.233
- +
Ext. Price(USD):$206.80
MOQ:80
Mult:40
SPQ:40
Available Stock
29
Estimated Ship Time:6-13 working days
1+$10.35
10+$9.163
252+$7.4304
504+$6.8472
- +
Ext. Price(USD):$20.70
MOQ:2
Mult:1
SPQ:1
Molex
ECAD Model:
Ten60 R/A Recpt Assy G-6AC-50S-G
Available Stock
43
Estimated Ship Time:7-9 working days
19+
4+$15.741
20+$15.114
- +
Ext. Price(USD):$62.96
MOQ:4
Mult:1
SPQ:1
Samtec
ECAD Model:
Conn Board Stacker HDR 9 POS 2.54mm Solder ST Thru-Hole
Available Stock
1,466
Estimated Ship Time:7-9 working days
17+
250+$0.495
- +
Ext. Price(USD):$123.75
MOQ:250
Mult:1
SPQ:1
Connector Header Surface Mount Right Angle 2 position 0.049 (1.25mm)
Available Stock
990
Estimated Ship Time:7-9 working days
23+
223+$0.495
- +
Ext. Price(USD):$110.38
MOQ:223
Mult:1
SPQ:1
Pancon
ECAD Model:
IDC Connector F 4 Pos 3.96mm IDT RA Cable Mount Bag
Available Stock
24,929
Estimated Ship Time:5-12 working days
500+$0.4058
1,000+$0.4048
15,000+$0.304
25,000+$0.2734
- +
Ext. Price(USD):$202.90
MOQ:500
Mult:500
SPQ:500
Conn Shrouded Header HDR 30 POS 2mm Solder RA Thru-Hole Tube
Available Stock
7,968
Estimated Ship Time:6-13 working days
1+$5.152
25+$4.5576
1,008+$4.2768
2,512+$2.9916
- +
Ext. Price(USD):$15.45
MOQ:3
Mult:1
SPQ:1
Molex
ECAD Model:
Board to Board Connector 100 Pos 0.5mm Solder ST SMD SlimStack T/R
Available Stock
380
Estimated Ship Time:5-12 working days
3+$47.762
6+$24.398
1,000+$7.9608
2,500+$7.5435
- +
Ext. Price(USD):$143.28
MOQ:3
Mult:1
Molex
ECAD Model:
Wire to Board HDR 10 POS 4.2mm Solder RA TH Mini-Fit BMI Tray
Available Stock
1,170
Estimated Ship Time:5-12 working days
6+$23.606
25+$5.137
1,000+$4.066
1,368+$4.0125
- +
Ext. Price(USD):$141.63
MOQ:6
Mult:1
SPQ:1
multicomp
ECAD Model:
WTB CONN, HEADER, R/A, 16POS, 2ROW, 2MM;
Available Stock
2,284
Estimated Ship Time:6-12 working days
50+$0.3038
100+$0.2718
200+$0.2551
- +
Ext. Price(USD):$25.21
MOQ:83
Mult:1
Conn Shrouded Header HDR 10 POS 2mm Solder RA SMD Tube
Available Stock
41
Estimated Ship Time:6-13 working days
1+$4.738
41+$3.78
1,025+$2.9916
2,009+$2.5272
- +
Ext. Price(USD):$14.21
MOQ:3
Mult:1
SPQ:1
Conn Shrouded Header HDR 14 POS 2mm Solder ST Thru-Hole Tube
Available Stock
424
Estimated Ship Time:6-13 working days
1+$2.99
48+$2.156
2,016+$1.4472
5,016+$1.2312
- +
Ext. Price(USD):$14.95
MOQ:5
Mult:1
SPQ:1
Available Stock
405
Estimated Ship Time:5-12 working days
5+$3.036
25+$2.8112
500+$0.924
1,000+$0.856
- +
Ext. Price(USD):$30.36
MOQ:10
Mult:1
SPQ:100
Pancon
ECAD Model:
IDC Connector F 8 POS 2.54mm IDT RA Cable Mount Bag
Available Stock
3,236
Estimated Ship Time:5-12 working days
100+$0.7997
300+$0.6382
10,000+$0.4604
15,000+$0.4592
- +
Ext. Price(USD):$79.97
MOQ:100
Mult:100
SPQ:100
Shrouded Header 18 Pos 4.68mm Solder Right Angle Side Entry Thru-Hole
Available Stock
33
Estimated Ship Time:9-14 working days
1+$29.5812
10+$25.1413
140+$20.8711
560+$18.9286
- +
Ext. Price(USD):$29.58
MOQ:1
Mult:1
SPQ:1
Available Stock
500
Estimated Ship Time:6-13 working days
1+$2.3805
10+$2.0815
2,430+$1.2096
5,670+$1.1772
- +
Ext. Price(USD):$14.28
MOQ:6
Mult:1
SPQ:1
Conn Shrouded Header (4 Sides) HDR 2Power/40Signal POS 1.88mm/2mm Solder ST Top Entry Thru-Hole PowerStrip™ Tray
Available Stock
63
Estimated Ship Time:6-13 working days
1+$7.682
540+$5.8752
1,026+$5.7456
- +
Ext. Price(USD):$15.36
MOQ:2
Mult:1
SPQ:1
Elevated Shrouded Header, HDR, 40 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Bulk
Available Stock
14
Estimated Ship Time:6-13 working days
1+$11.6035
10+$10.956
500+$7.9812
1,000+$7.3116
- +
Ext. Price(USD):$23.20
MOQ:2
Mult:1
SPQ:1
25 / PageGoto