Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Connector HDR 16 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$6.9829
- +
Ext. Price(USD):$8,484.22
MOQ:1,215
Mult:1,215
SPQ:405
Conn Shrouded Header HDR 6 POS 3.96mm Solder ST Thru-Hole Box
Available Stock
200
Estimated Ship Time:14-17 working days
100+$0.3548
300+$0.2973
5,000+$0.2226
10,000+$0.2226
- +
Ext. Price(USD):$50.02
MOQ:141
Mult:1
SPQ:1
MICT REC PT 266 ASSY PDNI
Pre-order
31,500
Factory Lead Time:22-26 weeks
315+$95.2
500+$80.8625
1,000+$71.65
2,500+$61.4125
5,000+$55.275
- +
Ext. Price(USD):$29,988.00
MOQ:315
Mult:315
SPQ:315
Molex
ECAD Model:
Conn Socket Strip RCP 28 POS 2.54mm Solder RA Side Entry Thru-Hole
Pre-order
327,600
Factory Lead Time:22-26 weeks
3,276+$3.0125
8,000+$2.6375
20,000+$2.5875
- +
Ext. Price(USD):$9,868.95
MOQ:3,276
Mult:3,276
Molex
ECAD Model:
Pre-order
375,000
Factory Lead Time:22-26 weeks
3,750+$0.0738
15,000+$0.07
- +
Ext. Price(USD):$276.75
MOQ:3,750
Mult:3,750
SPQ:3,750
JST
ECAD Model:
Plug RPZ Connector
Pre-order
1,200
Factory Lead Time:18-22 weeks
26+
120+$4.0387
360+$3.9713
600+$3.8704
- +
Ext. Price(USD):$484.64
MOQ:120
Mult:120
SPQ:120
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
4,000
Estimated Ship Time:14-17 working days
1+$0.0986
300+$0.0904
10,000+$0.0527
30,000+$0.0515
- +
Ext. Price(USD):$50.06
MOQ:641
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
539,000
Factory Lead Time:22-26 weeks
5,390+$2.7
- +
Ext. Price(USD):$14,553.00
MOQ:5,390
Mult:5,390
SPQ:5,390
Pre-order
216,000
Factory Lead Time:22-26 weeks
2,160+$3.5
5,004+$3.2625
10,008+$3.075
- +
Ext. Price(USD):$7,560.00
MOQ:2,160
Mult:2,160
SPQ:2,160
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.6557
- +
Ext. Price(USD):$8,444.07
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board Crimp Style IDC Wire-to-Wire Crimp Style
Pre-order
240,000
Factory Lead Time:16-18 weeks
24,000+$0.0823
- +
Ext. Price(USD):$1,975.20
MOQ:24,000
Mult:24,000
Amphenol T816 Series Wire-to-Board Connector, 2.54mm Pitch, 20-Pin Dual Row, Right Angle, TH
Available Stock
533
Estimated Ship Time:6-12 working days
10+$1.4224
100+$1.397
500+$1.3716
1,000+$1.3716
2,500+$1.3716
- +
Ext. Price(USD):$24.18
MOQ:17
Mult:1
Molex
ECAD Model:
Wire-to-Board Connector Header, 6 Pos, 2.5mm Pitch, Solder, ST Top Entry, TH
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$0.3575
1,200+$0.3375
- +
Ext. Price(USD):$107.25
MOQ:300
Mult:300
SPQ:300
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.7642
- +
Ext. Price(USD):$2,063.34
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board Connector HDR 14 POS 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
585,000
Factory Lead Time:15 weeks
1,170+$4.8276
- +
Ext. Price(USD):$5,648.29
MOQ:1,170
Mult:1,170
SPQ:390
Wire-to-Board HDR 22 Pos 4.2mm Solder ST Top Entry TH
Pre-order
472,500
Factory Lead Time:15 weeks
945+$1.5738
- +
Ext. Price(USD):$1,487.24
MOQ:945
Mult:945
SPQ:315
Conn Shrouded Header (4 Sides) HDR 2 POS 1mm Solder ST Top Entry SMD T/R
Available Stock
8,700
Estimated Ship Time:6-7 working days
22+
20+$0.5255
1,500+$0.1099
- +
Ext. Price(USD):$10.51
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 3 POS 2.54mm Solder ST Top Entry Thru-Hole
Available Stock
2,520
Estimated Ship Time:14-17 working days
50+$0.574
100+$0.4959
2,000+$0.348
5,000+$0.3458
- +
Ext. Price(USD):$50.08
MOQ:101
Mult:1
SPQ:1
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH 0.75μm Gold Au Plating w/ Peg 2.60mm PC Tail Length w/ Pick and Place Cap 36 Circuits Glow Wire Capable Tube
Pre-order
546,000
Factory Lead Time:22-26 weeks
5,460+$3.625
- +
Ext. Price(USD):$19,792.50
MOQ:5,460
Mult:5,460
SPQ:5,460
Wire-to-Board HDR 20 Pos 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
405,000
Factory Lead Time:15 weeks
810+$6.9446
- +
Ext. Price(USD):$5,625.12
MOQ:810
Mult:810
SPQ:270
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.867
- +
Ext. Price(USD):$1,170.45
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
420,000
Factory Lead Time:22-26 weeks
4,200+$0.375
8,400+$0.3388
- +
Ext. Price(USD):$1,575.00
MOQ:4,200
Mult:4,200
SPQ:4,200
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Vertical SMT Tails And Hold Down 15 Gold Plating Black Color 2 Positions Non Glow Wire Compatible
Pre-order
4,500,000
Factory Lead Time:13 weeks
9,000+$0.8965
- +
Ext. Price(USD):$8,068.50
MOQ:9,000
Mult:9,000
SPQ:1,800
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$5.8721
- +
Ext. Price(USD):$6,341.86
MOQ:1,080
Mult:1,080
SPQ:360
Amphenol T816 Series Wire-to-Board Connector, 2.54mm Pitch, 34-Pin Dual Row, Right Angle, TH
Available Stock
769
Estimated Ship Time:6-12 working days
10+$1.4672
100+$1.441
500+$1.4148
1,000+$1.4148
2,500+$1.4148
- +
Ext. Price(USD):$24.94
MOQ:17
Mult:1
25 / PageGoto