Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Unshrouded Header HDR 6 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
1,040,000
Factory Lead Time:22-26 weeks
10,400+$0.3063
50,000+$0.255
100,000+$0.2213
250,000+$0.2038
- +
Ext. Price(USD):$3,185.52
MOQ:10,400
Mult:10,400
SPQ:10,400
Wire-to-Board Connector HDR 10 Pos 3mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.6058
- +
Ext. Price(USD):$1,453.92
MOQ:2,400
Mult:2,400
SPQ:800
Wire-to-Board Connector HDR 16 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$0.719
- +
Ext. Price(USD):$873.58
MOQ:1,215
Mult:1,215
SPQ:405
Molex
ECAD Model:
1.25mm Pitch Micro Lock Plus PCB Header Vertical SMD 0.38um Gold Plating 13 Circuits Tape Reel Black
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$1.1625
12,000+$1.025
30,000+$1
- +
Ext. Price(USD):$5,580.00
MOQ:4,800
Mult:4,800
Conn Shrouded Header HDR 22 POS 2mm Solder ST Thru-Hole Box
Available Stock
109
Estimated Ship Time:4-6 working days
1+$0.4119
- +
Ext. Price(USD):$0.41
MOQ:1
Mult:1
SPQ:1
Board to Board Connector RCP 30 Pos 1.27mm Solder RA Thru-Hole
Available Stock
791
Estimated Ship Time:14-17 working days
1+$16.1359
5+$11.6121
100+$8.5199
200+$8.4825
- +
Ext. Price(USD):$64.54
MOQ:4
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.9442
- +
Ext. Price(USD):$5,933.04
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 34 POS 2mm Solder RA Side Entry Thru-Hole
Available Stock
45
Estimated Ship Time:4-6 working days
26+
1+$2.3022
- +
Ext. Price(USD):$2.30
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch CLIK Mate Wire-to-Board PCB Receptacle Dual Row SMD Vertical 0.38μm Gold Au Plating 32 Circuits Natural
Pre-order
135,000
Factory Lead Time:22-26 weeks
1,350+$3.8875
4,050+$3.3875
10,350+$3.325
- +
Ext. Price(USD):$5,248.12
MOQ:1,350
Mult:1,350
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.5877
- +
Ext. Price(USD):$2,381.55
MOQ:1,500
Mult:1,500
SPQ:500
Molex
ECAD Model:
Wire-to-Board HDR 14 Pos 1.25mm Solder ST Top Entry SMD T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$1.2
8,000+$1.05
20,000+$1.0375
- +
Ext. Price(USD):$3,600.00
MOQ:3,000
Mult:3,000
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7347
- +
Ext. Price(USD):$991.84
MOQ:1,350
Mult:1,350
SPQ:450
Conn Unshrouded Header HDR 14 POS 2.54mm Solder ST Top Entry SMD BergStik® T/R
Pre-order
2,100
Factory Lead Time:10-16 weeks
24+
210+$1.0981
420+$1.0696
- +
Ext. Price(USD):$230.60
MOQ:210
Mult:210
SPQ:210
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 2mm Solder RA Thru-Hole Tube
Pre-order
477,000
Factory Lead Time:22-26 weeks
4,770+$1.25
- +
Ext. Price(USD):$5,962.50
MOQ:4,770
Mult:4,770
SPQ:4,770
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.4958
- +
Ext. Price(USD):$7,646.22
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Unshrouded Header HDR 12 POS 2.5mm Solder RA Side Entry Thru-Hole Reel
Available Stock
4,540
Estimated Ship Time:4-6 working days
1+$0.313
200+$0.2834
- +
Ext. Price(USD):$0.31
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Connector HDR 14 POS 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
585,000
Factory Lead Time:15 weeks
1,170+$4.6082
- +
Ext. Price(USD):$5,391.59
MOQ:1,170
Mult:1,170
SPQ:390
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9714
- +
Ext. Price(USD):$1,311.39
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 24 Pos 4.2mm Solder ST Top Entry TH
Pre-order
472,500
Factory Lead Time:15 weeks
945+$1.6069
- +
Ext. Price(USD):$1,518.52
MOQ:945
Mult:945
SPQ:315
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.159
- +
Ext. Price(USD):$8,243.10
MOQ:900
Mult:900
SPQ:300
Amphenol
Package:SMD,P=0.8mm
ECAD Model:
Conn Board to Board PL 20 POS 0.8mm Solder ST Top Entry SMD Bergstak T/R
Pre-order
450,000
Factory Lead Time:8 weeks
900+$1.1456
- +
Ext. Price(USD):$1,031.04
MOQ:900
Mult:450
SPQ:450
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.8091
- +
Ext. Price(USD):$4,570.92
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Ejector Header HDR 14 POS 2.54mm Solder RA Thru-Hole Box
Pre-order
9,000
Factory Lead Time:18-22 weeks
26+
900+$0.6462
2,700+$0.6354
4,500+$0.6193
- +
Ext. Price(USD):$581.58
MOQ:900
Mult:900
SPQ:900
Wire-to-Board Connector HDR 14 POS 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
585,000
Factory Lead Time:15 weeks
1,170+$1.0324
- +
Ext. Price(USD):$1,207.90
MOQ:1,170
Mult:1,170
SPQ:390
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 36 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$1.45
- +
Ext. Price(USD):$6,786.00
MOQ:4,680
Mult:4,680
SPQ:4,680
25 / PageGoto