Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
400,000
Factory Lead Time:15 weeks
800+$1.1403
- +
Ext. Price(USD):$912.24
MOQ:800
Mult:800
SPQ:400
Wire-to-Board Connector HDR 16 Pos 4.2mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$6.6051
- +
Ext. Price(USD):$8,025.19
MOQ:1,215
Mult:1,215
SPQ:405
CamdenBoss
ECAD Model:
Shrouded Header, 2 Pos, 7.5mm Pitch, Solder RA, Thru-Hole
Available Stock
667
Estimated Ship Time:6-12 working days
10+$0.6138
100+$0.5499
1,000+$0.5303
2,500+$0.5303
- +
Ext. Price(USD):$24.55
MOQ:40
Mult:10
Header, Unshrouded, 6 Pos, 2.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
1,000
Estimated Ship Time:6-7 working days
22+
1,000+$0.2111
- +
Ext. Price(USD):$211.10
MOQ:1,000
Mult:1,000
Molex
ECAD Model:
Pre-order
11,300
Factory Lead Time:22-26 weeks
113+$1.1875
450+$1.1625
1,000+$1.125
- +
Ext. Price(USD):$134.18
MOQ:113
Mult:113
SPQ:113
Molex
ECAD Model:
Conn Unshrouded Header HDR 58 POS 2.54mm Solder ST Thru-Hole C-Grid III™ Tray
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$3.025
- +
Ext. Price(USD):$9,075.00
MOQ:3,000
Mult:3,000
SPQ:3,000
CamdenBoss
ECAD Model:
PCB Mount Male Horizontal Closed Ended
Available Stock
403
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
JST
ECAD Model:
Board to Board Connector Receptacle, 8 Pos, 2.5mm Pitch
Pre-order
24,000
Factory Lead Time:18-22 weeks
26+
2,400+$0.2019
7,200+$0.1986
12,000+$0.1935
- +
Ext. Price(USD):$484.56
MOQ:2,400
Mult:2,400
SPQ:2,400
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.6281
- +
Ext. Price(USD):$4,353.72
MOQ:1,200
Mult:1,200
SPQ:400
Datamate Mix-Tek Male Horizontal PC Tail Connector, Jackscrews/5mm Hex Socket, Board Mount, No Signal Contacts, 2 x 3.5mm PC Tail Power
Available Stock
134
Estimated Ship Time:6-12 working days
1+$43.9232
5+$43.1388
50+$42.3545
100+$42.3545
- +
Ext. Price(USD):$43.92
MOQ:1
Mult:1
Pre-order
1,800,000
Factory Lead Time:8 weeks
3,600+$1.4345
- +
Ext. Price(USD):$5,164.20
MOQ:3,600
Mult:3,600
SPQ:3,600
Unshrouded Header, 20 POS, 2.54mm Pitch, Solder RA, Thru-Hole
Available Stock
250
Estimated Ship Time:6-7 working days
22+
250+$1.0381
- +
Ext. Price(USD):$259.52
MOQ:250
Mult:250
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6615
- +
Ext. Price(USD):$1,190.70
MOQ:1,800
Mult:600
SPQ:600
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.6825
- +
Ext. Price(USD):$921.37
MOQ:1,350
Mult:1,350
SPQ:450
JST 2.5mm Pitch 10-Pin Double Row Header JFA J2000 Series Right Angle
Available Stock
367
Estimated Ship Time:14-17 working days
10+$2.2413
30+$1.6714
500+$1.1993
1,000+$1.1922
- +
Ext. Price(USD):$51.54
MOQ:23
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Board to Board PL 46 POS 0.5mm Solder ST SMD SlimStack™ T/R
Available Stock
50
Estimated Ship Time:3-5 working days
07+
10+$1.2427
30+$1.2218
50+$1.1789
- +
Ext. Price(USD):$12.42
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Shrouded Header HDR 18 POS 2mm Solder RA Thru-Hole Box
Available Stock
50
Estimated Ship Time:4-6 working days
26+
10+$0.7969
- +
Ext. Price(USD):$7.96
MOQ:10
Mult:10
SPQ:1
Molex
ECAD Model:
Conn Board to Board PL 50 POS 0.4mm Solder ST SMD T/R
Available Stock
35
Estimated Ship Time:3-5 working days
07+
10+$0.6954
50+$0.6836
100+$0.6596
- +
Ext. Price(USD):$6.95
MOQ:10
Mult:10
SPQ:10
03P MTA156 POL HDR ASSY LF
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$0.1688
2,500+$0.1563
5,000+$0.1488
10,000+$0.1438
25,000+$0.12
- +
Ext. Price(USD):$168.80
MOQ:1,000
Mult:1,000
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9001
- +
Ext. Price(USD):$810.09
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 2 POS 2mm Solder ST Thru-Hole Tube
Pre-order
103,500
Factory Lead Time:22-26 weeks
1,035+$2.225
2,070+$2.1125
- +
Ext. Price(USD):$2,302.87
MOQ:1,035
Mult:1,035
SPQ:1,035
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$0.7939
- +
Ext. Price(USD):$1,000.31
MOQ:1,260
Mult:1,260
SPQ:420
Minitek PWR 3.0 Wire-to-Board Connector, Header, Dual Row
Pre-order
2,767,500
Factory Lead Time:15 weeks
5,535+$0.4021
- +
Ext. Price(USD):$2,225.62
MOQ:5,535
Mult:5,535
SPQ:1,845
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
405,000
Factory Lead Time:15 weeks
810+$5.2628
- +
Ext. Price(USD):$4,262.86
MOQ:810
Mult:270
SPQ:270
Molex
ECAD Model:
Pre-order
528,000
Factory Lead Time:22-26 weeks
5,280+$1.4
- +
Ext. Price(USD):$7,392.00
MOQ:5,280
Mult:5,280
SPQ:5,280
25 / PageGoto