Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Socket Strip
Pre-order
6,000
Factory Lead Time:22-26 weeks
60+$267.525
100+$246.6375
500+$234.0875
1,000+$221.55
- +
Ext. Price(USD):$16,051.50
MOQ:60
Mult:60
SPQ:60
Molex
ECAD Model:
Pre-order
1,200,000
Factory Lead Time:22-26 weeks
12,000+$0.15
24,000+$0.1413
- +
Ext. Price(USD):$1,800.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Conn Unshrouded Header HDR 22 POS 2mm Solder RA Thru-Hole Loose
Pre-order
720,000
Factory Lead Time:22-26 weeks
7,200+$1.8625
10,000+$1.625
25,000+$1.4875
50,000+$1.4
100,000+$1.3
- +
Ext. Price(USD):$13,410.00
MOQ:7,200
Mult:7,200
SPQ:7,200
JST
ECAD Model:
Connector Board to Board RCP 6 POS 2mm Solder ST Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1455
36,000+$0.1431
60,000+$0.1394
- +
Ext. Price(USD):$1,746.00
MOQ:12,000
Mult:12,000
SPQ:12,000
Wire-to-Board Connector HDR 14 POS 4.2mm Solder RA Side Entry Thru-Hole Tray
Pre-order
585,000
Factory Lead Time:15 weeks
1,170+$4.3888
- +
Ext. Price(USD):$5,134.89
MOQ:1,170
Mult:1,170
SPQ:390
Wire to Board Connector HDR 2 POS 7.92mm Solder RA Thru-Hole
Available Stock
500
Estimated Ship Time:14-17 working days
300+$0.1493
500+$0.1384
10,000+$0.1006
30,000+$0.1006
- +
Ext. Price(USD):$50.01
MOQ:335
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
3,680,000
Factory Lead Time:22-26 weeks
36,800+$0.875
80,000+$0.7625
200,000+$0.75
- +
Ext. Price(USD):$32,200.00
MOQ:36,800
Mult:36,800
JST
ECAD Model:
Conn IDC HDR 10 POS 2.5mm IDT ST Thru-Hole Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.2895
18,000+$0.2846
30,000+$0.2773
- +
Ext. Price(USD):$1,737.00
MOQ:6,000
Mult:6,000
SPQ:6,000
JST
Package:SMD,P=0.5mm
ECAD Model:
Conn Board to Board SKT 80 POS 0.5mm Solder ST Top Entry SMD T/R
Available Stock
1,482
Estimated Ship Time:14-17 working days
10+$2.4564
30+$1.9016
500+$1.4017
1,000+$1.3946
- +
Ext. Price(USD):$51.58
MOQ:21
Mult:1
SPQ:1
Top Entry Header Connector
Available Stock
332
Estimated Ship Time:6-7 working days
20+$0.257
- +
Ext. Price(USD):$5.14
MOQ:20
Mult:20
Molex
ECAD Model:
Wire-to-Board RCP 32 POS 2.54mm Solder RA Thru-Hole EXTreme LPHPower Tray
Pre-order
140,000
Factory Lead Time:22-26 weeks
1,400+$4.175
4,000+$3.65
10,000+$3.575
- +
Ext. Price(USD):$5,845.00
MOQ:1,400
Mult:1,400
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.8586
- +
Ext. Price(USD):$10,609.11
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8391
- +
Ext. Price(USD):$1,132.78
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Board to Board RCP 70 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
47
Estimated Ship Time:3-5 working days
06+
10+$0.3261
50+$0.3205
100+$0.3093
- +
Ext. Price(USD):$3.26
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Conn Board to Board RCP 7 POS 2mm Solder ST Thru-Hole Box
Available Stock
2,500
Estimated Ship Time:6-7 working days
22+
500+$0.236
- +
Ext. Price(USD):$118.00
MOQ:500
Mult:500
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.921
- +
Ext. Price(USD):$1,105.20
MOQ:1,200
Mult:400
SPQ:400
Wire-to-Board (Crimp Style/IDC) / Wire-to-Wire (Crimp Style/IDC)
Available Stock
946
Estimated Ship Time:14-17 working days
100+$0.2809
300+$0.2233
5,000+$0.1673
10,000+$0.1673
- +
Ext. Price(USD):$50.00
MOQ:178
Mult:1
SPQ:1
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Vertical SMT Tails And Hold Down 30 Gold Plating Natural Color 8 Positions Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:13 weeks
6,000+$2.3589
- +
Ext. Price(USD):$14,153.40
MOQ:6,000
Mult:6,000
SPQ:1,200
JST
ECAD Model:
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0573
72,000+$0.0564
120,000+$0.055
- +
Ext. Price(USD):$1,375.20
MOQ:24,000
Mult:24,000
SPQ:24,000
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.5463
- +
Ext. Price(USD):$5,319.45
MOQ:1,500
Mult:500
SPQ:500
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 10 POS 2mm Solder RA Thru-Hole Tube
Pre-order
432,000
Factory Lead Time:22-26 weeks
4,320+$1.775
- +
Ext. Price(USD):$7,668.00
MOQ:4,320
Mult:4,320
SPQ:4,320
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1699
- +
Ext. Price(USD):$1,403.88
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.6469
- +
Ext. Price(USD):$2,964.42
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR 16-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.5024
- +
Ext. Price(USD):$2,839.53
MOQ:1,890
Mult:1,890
SPQ:630
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4781
- +
Ext. Price(USD):$1,330.29
MOQ:900
Mult:900
SPQ:300
25 / PageGoto