Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 4 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.5049
- +
Ext. Price(USD):$908.82
MOQ:1,800
Mult:1,800
SPQ:600
Disconnector Crimp Style Connector, 1.0mm Pitch
Available Stock
1,161
Estimated Ship Time:14-17 working days
10+$2.2509
30+$1.6865
500+$1.2133
1,000+$1.2063
- +
Ext. Price(USD):$51.77
MOQ:23
Mult:1
SPQ:1
JST
ECAD Model:
Shrouded Header HDR 2 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0269
72,000+$0.0265
120,000+$0.0258
- +
Ext. Price(USD):$645.60
MOQ:24,000
Mult:24,000
SPQ:24,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.391
- +
Ext. Price(USD):$1,251.90
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
CONN Wire-to-Board Connector HDR 12POS 1.5mm THRU
Pre-order
56,000
Factory Lead Time:18-22 weeks
26+
5,600+$0.055
16,800+$0.0541
28,000+$0.0527
- +
Ext. Price(USD):$308.00
MOQ:5,600
Mult:5,600
SPQ:5,600
JST
ECAD Model:
Conn IDC RCP 5 POS 2mm IDT RA Cable Mount Box
Pre-order
360,000
Factory Lead Time:16-18 weeks
36,000+$0.0613
- +
Ext. Price(USD):$2,206.80
MOQ:36,000
Mult:36,000
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.9975
- +
Ext. Price(USD):$1,197.00
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.0724
- +
Ext. Price(USD):$5,469.24
MOQ:5,100
Mult:5,100
SPQ:1,700
Conn Unshrouded Header HDR 40 POS 2.54mm Solder ST SMD T/R
Pre-order
1,480,000
Factory Lead Time:8 weeks
2,960+$0.8461
- +
Ext. Price(USD):$2,504.45
MOQ:2,960
Mult:370
SPQ:370
Conn Wire to Board HDR 14 POS 3mm Solder ST Top Entry Thru-Hole
Pre-order
1,080,000
Factory Lead Time:15 weeks
2,160+$1.1298
- +
Ext. Price(USD):$2,440.36
MOQ:2,160
Mult:2,160
SPQ:720
Molex
ECAD Model:
Conn Board to Board HDR 10 Power POS 2mm/2.5mm Solder RA Side Entry Thru-Hole EXTreme LPHPower Tray
Pre-order
28,000
Factory Lead Time:22-26 weeks
280+$7.3375
560+$7.125
1,000+$6.9375
- +
Ext. Price(USD):$2,054.50
MOQ:280
Mult:280
SPQ:280
JST
ECAD Model:
Conn Unshrouded Header HDR 5 POS 2mm Solder RA Thru-Hole
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.165
72,000+$0.1622
120,000+$0.1581
- +
Ext. Price(USD):$3,960.00
MOQ:24,000
Mult:24,000
SPQ:24,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 14 POS 2.54mm Solder ST Top Entry Thru-Hole
Pre-order
33,600
Factory Lead Time:22-26 weeks
336+$5.0625
672+$4.875
1,000+$4.05
2,500+$3.525
5,000+$3.2875
- +
Ext. Price(USD):$1,701.00
MOQ:336
Mult:336
SPQ:336
Conn Shrouded Header HDR 26 POS 2mm Solder ST Thru-Hole Box
Available Stock
7,750
Estimated Ship Time:6-7 working days
22+
250+$0.2681
- +
Ext. Price(USD):$67.02
MOQ:250
Mult:250
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.4637
- +
Ext. Price(USD):$5,356.44
MOQ:1,200
Mult:400
SPQ:400
Disconnectable Crimp Style Connectors, Wire-to-Board/Wire-to-Wire
Available Stock
120
Estimated Ship Time:14-17 working days
10+$2.8318
30+$2.2728
500+$1.7176
1,000+$1.7094
- +
Ext. Price(USD):$50.97
MOQ:18
Mult:1
SPQ:1
Molex
ECAD Model:
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$4.825
600+$4.7
1,000+$4.575
- +
Ext. Price(USD):$1,447.50
MOQ:300
Mult:300
SPQ:300
Molex
ECAD Model:
Pre-order
1,500,000
Factory Lead Time:22-26 weeks
15,000+$0.0963
30,000+$0.0925
- +
Ext. Price(USD):$1,444.50
MOQ:15,000
Mult:15,000
SPQ:15,000
Conn Shrouded Header HDR 6 POS 1.5mm Solder RA Thru-Hole Box
Pre-order
91,200
Factory Lead Time:16-18 weeks
9,120+$0.2035
- +
Ext. Price(USD):$1,855.92
MOQ:9,120
Mult:9,120
Conn Wire to Board HDR 2 POS 5.08mm Solder ST Thru-Hole Box
Available Stock
240
Estimated Ship Time:14-17 working days
10+$2.4948
30+$1.9098
500+$1.3946
1,000+$1.3876
- +
Ext. Price(USD):$52.39
MOQ:21
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Socket Strip RCP 54 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III™
Pre-order
100,000
Factory Lead Time:22-26 weeks
1,000+$6.05
- +
Ext. Price(USD):$6,050.00
MOQ:1,000
Mult:1,000
SPQ:1,000
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.6981
- +
Ext. Price(USD):$1,047.15
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7068
- +
Ext. Price(USD):$1,060.20
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Connector HDR, 4 Pos, 3.96mm Pitch, Solder, ST Top Entry, TH
Available Stock
9,737
Estimated Ship Time:6-7 working days
22+
20+$0.1908
250+$0.0657
- +
Ext. Price(USD):$3.81
MOQ:20
Mult:20
Molex
Package:SMD,P=1.5mm,Horizontal SMD
ECAD Model:
Pre-order
165,000
Factory Lead Time:22-26 weeks
1,650+$5.6375
4,400+$4.925
10,450+$4.825
- +
Ext. Price(USD):$9,301.87
MOQ:1,650
Mult:1,650
25 / PageGoto