Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
129
Estimated Ship Time:4-6 working days
26+
1+$1.0626
- +
Ext. Price(USD):$1.06
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Connector HDR, 10 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$3.2155
- +
Ext. Price(USD):$4,919.71
MOQ:1,530
Mult:1,530
SPQ:510
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7043
- +
Ext. Price(USD):$2,300.80
MOQ:1,350
Mult:1,350
SPQ:450
Connector Through-Hole Type Shrouded Header
Available Stock
3,046
Estimated Ship Time:6-7 working days
22+
20+$0.2685
336+$0.1085
- +
Ext. Price(USD):$5.37
MOQ:20
Mult:20
Conn Shrouded Header HDR 14 POS 2mm Solder RA Thru-Hole Box
Available Stock
2,250
Estimated Ship Time:6-7 working days
22+
250+$0.1573
- +
Ext. Price(USD):$39.32
MOQ:250
Mult:250
JST
ECAD Model:
IDC Connector Receptacle, 20 Pos, 2.54mm, Solder RA, Thru-Hole
Pre-order
16,000
Factory Lead Time:18-22 weeks
26+
1,600+$1.1382
4,800+$1.1193
8,000+$1.0908
- +
Ext. Price(USD):$1,821.12
MOQ:1,600
Mult:1,600
SPQ:1,600
Conn Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
264
Estimated Ship Time:14-17 working days
100+$0.3494
300+$0.2946
4,000+$0.2293
5,000+$0.2293
- +
Ext. Price(USD):$50.31
MOQ:144
Mult:1
SPQ:1
JST
ECAD Model:
Unshrouded Header Connector, 3 POS, 2.5mm Pitch, Solder, ST, Thru-Hole
Available Stock
2,250
Estimated Ship Time:4-6 working days
250+$0.3884
- +
Ext. Price(USD):$97.10
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.0058
- +
Ext. Price(USD):$4,806.96
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1229
- +
Ext. Price(USD):$1,347.48
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Wire-to-Board Connector HDR 3 POS 5mm Solder ST Top Entry Thru-Hole Bag
Available Stock
40
Estimated Ship Time:5-8 working days
25+
1+$0.5259
10+$0.4382
100+$0.3811
750+$0.3562
- +
Ext. Price(USD):$0.52
MOQ:1
Mult:1
SPQ:750
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.1786
- +
Ext. Price(USD):$6,010.86
MOQ:5,100
Mult:1,700
SPQ:1,700
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9227
- +
Ext. Price(USD):$1,245.64
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 28 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
6,400
Estimated Ship Time:4-6 working days
1+$0.4612
100+$0.4329
- +
Ext. Price(USD):$0.46
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$0.8391
- +
Ext. Price(USD):$906.22
MOQ:1,080
Mult:1,080
SPQ:360
Wire-to-Board HDR, 2 POS, 3mm, Solder ST Top Entry TH Tray
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.43
- +
Ext. Price(USD):$3,483.00
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board HDR, 24 Pos, 4.2mm Pitch, Solder, ST, Top Entry, Thru-Hole, Tray
Pre-order
472,500
Factory Lead Time:15 weeks
945+$9.2548
- +
Ext. Price(USD):$8,745.78
MOQ:945
Mult:315
SPQ:315
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.494
- +
Ext. Price(USD):$7,644.60
MOQ:900
Mult:900
SPQ:300
Board to Board Connector, 40 Pos, 0.5mm Pitch, Solder RA Side Entry, SMD, T/R
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.9989
27,000+$0.9823
45,000+$0.9573
- +
Ext. Price(USD):$8,990.10
MOQ:9,000
Mult:9,000
SPQ:9,000
Molex
ECAD Model:
Shrouded Header Connector, HDR 10 Pos, 2mm Pitch, Solder, ST, Thru-Hole, Tube
Pre-order
15,800
Factory Lead Time:22-26 weeks
158+$2.6875
630+$2.55
- +
Ext. Price(USD):$424.62
MOQ:158
Mult:158
SPQ:158
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2291
- +
Ext. Price(USD):$1,474.92
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$2.7211
- +
Ext. Price(USD):$2,448.99
MOQ:900
Mult:900
SPQ:450
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8096
- +
Ext. Price(USD):$1,214.40
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Board-to-Board Connector RCP 6 Pos 2.54mm Solder Straight SMD Automotive Box
Pre-order
27,000
Factory Lead Time:18-22 weeks
26+
2,700+$3.3309
8,100+$3.2754
13,500+$3.1921
- +
Ext. Price(USD):$8,993.43
MOQ:2,700
Mult:2,700
SPQ:2,700
Wire-to-Board Connector HDR 20 Pos 4.2mm Solder Straight Top Entry Thru-Hole
Pre-order
607,500
Factory Lead Time:15 weeks
1,215+$6.8105
- +
Ext. Price(USD):$8,274.75
MOQ:1,215
Mult:1,215
SPQ:405
25 / PageGoto