Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
JST
ECAD Model:
Shrouded Header HDR 36 POS 1.5mm Solder ST Thru-Hole
Available Stock
210
Estimated Ship Time:4-6 working days
210+$0.5808
- +
Ext. Price(USD):$121.96
MOQ:210
Mult:210
SPQ:210
Conn Shrouded Header HDR 10 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
440
Estimated Ship Time:14-17 working days
1+$2.0125
50+$1.4043
2,000+$1.0204
4,000+$1.0193
- +
Ext. Price(USD):$50.31
MOQ:25
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1206
36,000+$0.1187
60,000+$0.1157
- +
Ext. Price(USD):$1,447.20
MOQ:12,000
Mult:12,000
SPQ:12,000
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$4.975
- +
Ext. Price(USD):$14,925.00
MOQ:3,000
Mult:3,000
SPQ:3,000
MTA 100 Connector Assembly, 24 AWG, Standard
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$2.7375
2,500+$2.525
5,000+$2.4125
10,000+$2.35
25,000+$1.9625
- +
Ext. Price(USD):$5,475.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Pre-order
625,000
Factory Lead Time:15 weeks
1,250+$1.3823
- +
Ext. Price(USD):$1,727.87
MOQ:1,250
Mult:1,250
SPQ:1,250
Shrouded Header Connector, HDR, 2 Pos, 2.5mm Pitch, Solder, ST, TH, Bag/Box
Available Stock
3,940
Estimated Ship Time:5-7 working days
23+
450+$0.3301
1,000+$0.3142
2,000+$0.3068
- +
Ext. Price(USD):$148.54
MOQ:450
Mult:1
SPQ:1
JST
ECAD Model:
Conn Shrouded Header HDR 11 POS 1.25mm Solder ST SMD T/R
Pre-order
125,000
Factory Lead Time:18-22 weeks
26+
12,500+$0.6209
37,500+$0.6105
62,500+$0.595
- +
Ext. Price(USD):$7,761.25
MOQ:12,500
Mult:12,500
SPQ:12,500
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
990,000
Factory Lead Time:15 weeks
1,980+$1.8019
- +
Ext. Price(USD):$3,567.76
MOQ:1,980
Mult:1,980
SPQ:1,980
Molex
ECAD Model:
1.50mm Pitch CLIK Mate PCB Receptacle Single Row SMD Tin Plating Positive Lock Pick & Place Polyimide Tape 6 Circuits Red
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$0.7375
8,000+$0.65
20,000+$0.6375
- +
Ext. Price(USD):$2,655.00
MOQ:3,600
Mult:3,600
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.9057
- +
Ext. Price(USD):$3,922.69
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.7521
- +
Ext. Price(USD):$1,015.33
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR, 4 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, Tray
Pre-order
2,767,500
Factory Lead Time:15 weeks
5,535+$0.6877
- +
Ext. Price(USD):$3,806.41
MOQ:5,535
Mult:5,535
SPQ:1,845
Molex
ECAD Model:
Conn Shrouded Header HDR 14 POS 4.2mm Solder RA Side Entry Thru-Hole Mini-Fit BMI Tray
Pre-order
144,000
Factory Lead Time:22-26 weeks
1,440+$12.35
2,500+$10.75
5,000+$9.9875
- +
Ext. Price(USD):$17,784.00
MOQ:1,440
Mult:1,440
SPQ:1,440
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.665
- +
Ext. Price(USD):$997.50
MOQ:1,500
Mult:1,500
SPQ:500
multicomp
ECAD Model:
WTB CONN, HEADER, 12POS, 2ROW, 2MM;
Available Stock
4,168
Estimated Ship Time:6-12 working days
50+$0.3153
100+$0.3153
200+$0.3153
- +
Ext. Price(USD):$24.27
MOQ:77
Mult:1
Unshrouded Header HDR ST THT
Pre-order
4,000,000
Factory Lead Time:12 weeks
8,000+$0.3186
- +
Ext. Price(USD):$2,548.80
MOQ:8,000
Mult:1,000
SPQ:1,000
Wire-to-Board HDR, 2 POS, 3mm, Solder ST Top Entry TH Tray
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$0.43
- +
Ext. Price(USD):$3,483.00
MOQ:8,100
Mult:8,100
SPQ:2,700
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.008
- +
Ext. Price(USD):$1,360.80
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 2 POS 4.2mm Solder RA Side Entry TH
Pre-order
2,520,000
Factory Lead Time:15 weeks
5,040+$0.813
- +
Ext. Price(USD):$4,097.52
MOQ:5,040
Mult:5,040
SPQ:1,680
Molex
ECAD Model:
Pre-order
156,300
Factory Lead Time:22-26 weeks
1,563+$0.05
3,000+$0.0488
- +
Ext. Price(USD):$78.15
MOQ:1,563
Mult:1,563
SPQ:1,563
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.538
- +
Ext. Price(USD):$968.40
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Pre-order
217,000
Factory Lead Time:22-26 weeks
2,170+$1.0875
4,340+$1.025
- +
Ext. Price(USD):$2,359.87
MOQ:2,170
Mult:2,170
SPQ:2,170
Wire-to-Board HDR 16-Pin 4.2mm Solder RA Side Entry TH
Pre-order
495,000
Factory Lead Time:15 weeks
990+$5.0852
- +
Ext. Price(USD):$5,034.34
MOQ:990
Mult:990
SPQ:330
JST
ECAD Model:
JST Board-to-Board Connector, RK Series, 2.54mm Pitch, 14-Way (2 Rows), Solder Termination, 1A
Pre-order
18,000
Factory Lead Time:16-18 weeks
1,800+$1.1258
- +
Ext. Price(USD):$2,026.44
MOQ:1,800
Mult:1,800
25 / PageGoto