Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4874
- +
Ext. Price(USD):$731.10
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Shrouded Header 8-Pin 2mm Solder RA Thru-Hole Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.0765
18,000+$0.0753
30,000+$0.0734
- +
Ext. Price(USD):$459.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4919
- +
Ext. Price(USD):$1,342.71
MOQ:900
Mult:900
SPQ:300
Pre-order
124,400
Factory Lead Time:22-26 weeks
1,244+$5.825
5,287+$5.475
10,263+$5.2125
- +
Ext. Price(USD):$7,246.30
MOQ:1,244
Mult:1,244
SPQ:1,244
Header XH 2.5 THT Side Entry
Available Stock
55
Estimated Ship Time:6-7 working days
20+$0.1632
- +
Ext. Price(USD):$3.26
MOQ:20
Mult:20
JST
ECAD Model:
Conn Unshrouded Header HDR 5 POS 2mm Solder ST Thru-Hole
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.233
72,000+$0.2291
120,000+$0.2233
- +
Ext. Price(USD):$5,592.00
MOQ:24,000
Mult:24,000
SPQ:24,000
Molex
ECAD Model:
Pre-order
561,600
Factory Lead Time:22-26 weeks
5,616+$2
- +
Ext. Price(USD):$11,232.00
MOQ:5,616
Mult:5,616
SPQ:5,616
JST
ECAD Model:
Shrouded Header Connector 9-Pin 2.5mm Pitch Solder Right Angle Thru-Hole
Available Stock
2,320
Estimated Ship Time:6-7 working days
24+
20+$0.5339
100+$0.2123
- +
Ext. Price(USD):$10.67
MOQ:20
Mult:20
Conn IDC Connector M 4 POS 1.27mm IDT RA Cable Mount T/R
Available Stock
7,019
Estimated Ship Time:6-12 working days
10+$0.5963
100+$0.5342
1,000+$0.5247
2,500+$0.5247
- +
Ext. Price(USD):$29.81
MOQ:50
Mult:10
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.955
- +
Ext. Price(USD):$2,932.50
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.252
- +
Ext. Price(USD):$4,390.20
MOQ:1,350
Mult:450
SPQ:450
RECT PWR CON, R/A RCPT, 2P+4S, PRESS FIT; No. of Contacts:6Contacts; Product Range:PwrBlade 10164594 Series; Connector Mounting:PCB Mount; Contact Termination Type:Press Fit; Pitch Spacing:-; Gender:R 80AK4157
Available Stock
460
Estimated Ship Time:6-12 working days
1+$3.8125
10+$3.66
500+$3.294
1,000+$3.294
- +
Ext. Price(USD):$26.68
MOQ:7
Mult:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 2mm Solder ST Top Entry Thru-Hole Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.1004
36,000+$0.0987
60,000+$0.0962
- +
Ext. Price(USD):$1,204.80
MOQ:12,000
Mult:12,000
SPQ:12,000
Board to Board Connector HDR 38 Pos 1.5mm Solder ST SMD T/R
Available Stock
981
Estimated Ship Time:14-17 working days
1+$1.7783
50+$1.2577
2,000+$0.9029
4,000+$0.9006
- +
Ext. Price(USD):$51.57
MOQ:29
Mult:1
SPQ:1
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1978
- +
Ext. Price(USD):$1,437.36
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 2mm Solder RA Thru-Hole Tube
Pre-order
468,000
Factory Lead Time:22-26 weeks
4,680+$1.7125
- +
Ext. Price(USD):$8,014.50
MOQ:4,680
Mult:4,680
SPQ:4,680
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8287
- +
Ext. Price(USD):$1,118.74
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 20 Pos 3mm Solder Straight Top Entry TH Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$1.8454
- +
Ext. Price(USD):$2,740.41
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.1761
- +
Ext. Price(USD):$9,687.73
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder RA Side Entry Thru-Hole Tube
Pre-order
537,600
Factory Lead Time:22-26 weeks
5,376+$1.5875
- +
Ext. Price(USD):$8,534.40
MOQ:5,376
Mult:5,376
SPQ:5,376
JST
ECAD Model:
Board to Board Connector, 11 Pos, 1.25mm Pitch, Solder, Straight, Thru-Hole, Box
Pre-order
21,600
Factory Lead Time:18-22 weeks
26+
2,160+$0.6209
6,480+$0.6105
10,800+$0.595
- +
Ext. Price(USD):$1,341.14
MOQ:2,160
Mult:2,160
SPQ:2,160
Pre-order
2,400,000
Factory Lead Time:25-42 weeks
24,000+$0.9627
- +
Ext. Price(USD):$23,104.80
MOQ:24,000
Mult:2,400
SPQ:2,400
Conn Shrouded Header HDR 21 POS 0.5mm Solder ST SMD T/R
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$1.1982
27,000+$1.1783
45,000+$1.1483
- +
Ext. Price(USD):$10,783.80
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.572
- +
Ext. Price(USD):$2,358.00
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn Unshrouded Header HDR 9 POS 2.5mm Solder RA Side Entry Thru-Hole Reel
Available Stock
7,500
Estimated Ship Time:4-6 working days
500+$0.2727
- +
Ext. Price(USD):$136.35
MOQ:500
Mult:500
SPQ:500
25 / PageGoto