Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$2.2625
5,000+$1.6
10,000+$1.525
25,000+$1.45
- +
Ext. Price(USD):$6,787.50
MOQ:3,000
Mult:3,000
SPQ:3,000
JST
ECAD Model:
Conn Shrouded Header (3 Sides) HDR 7 POS 1.5mm Solder ST Top Entry Thru-Hole Box
Available Stock
1,500
Estimated Ship Time:6-7 working days
23+
500+$0.0841
- +
Ext. Price(USD):$42.05
MOQ:500
Mult:500
Wire-to-Board HDR 6 Pos 4.2mm Solder ST Top Entry TH
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.6755
- +
Ext. Price(USD):$1,215.90
MOQ:1,800
Mult:900
SPQ:900
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.2075
- +
Ext. Price(USD):$2,980.12
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Disconnectable Insulation Displacement Connectors
Pre-order
10,000
Factory Lead Time:18 weeks
1,000+$0.2614
5,000+$0.2549
- +
Ext. Price(USD):$261.40
MOQ:1,000
Mult:1,000
SPQ:1,000
Conn HDR, 14-Pin MTA156 HDR ASSY R/A F/L LF
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$10.0875
500+$9.55
1,000+$8.375
25,000+$7.45
50,000+$6.5375
- +
Ext. Price(USD):$2,521.87
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.3826
- +
Ext. Price(USD):$7,544.34
MOQ:900
Mult:900
SPQ:300
AMP CT F/HANGING P/HDR 3P G/P
Pre-order
4,200,000
Factory Lead Time:22-26 weeks
42,000+$1.375
50,000+$1.325
100,000+$1.2875
250,000+$1.15
500,000+$1.0375
- +
Ext. Price(USD):$57,750.00
MOQ:42,000
Mult:42,000
SPQ:42,000
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.7329
- +
Ext. Price(USD):$2,638.44
MOQ:3,600
Mult:3,600
SPQ:1,800
Wire-to-Board HDR 22 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$7.9369
- +
Ext. Price(USD):$10,714.81
MOQ:1,350
Mult:1,350
SPQ:450
Pre-order
36,000
Factory Lead Time:25-42 weeks
360+$27.3251
- +
Ext. Price(USD):$9,837.03
MOQ:360
Mult:72
SPQ:72
Board to Board Connector, PL, 20 Pos, 0.5mm Pitch, Solder, ST, SMD, T/R
Available Stock
20
Estimated Ship Time:6-7 working days
20+$2.885
- +
Ext. Price(USD):$57.70
MOQ:20
Mult:20
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4554
- +
Ext. Price(USD):$1,309.86
MOQ:900
Mult:900
SPQ:300
Conn Shrouded Header HDR 12 POS 2.54mm Solder ST Thru-Hole Package
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$5.4
5,000+$4.875
10,000+$4.45
25,000+$4.1375
50,000+$3.925
- +
Ext. Price(USD):$16,200.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Pre-order
198,000
Factory Lead Time:22-26 weeks
1,980+$4.8625
5,005+$4.5375
10,010+$4.2625
- +
Ext. Price(USD):$9,627.75
MOQ:1,980
Mult:1,980
SPQ:1,980
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 14 POS 2mm Solder ST Top Entry Thru-Hole Tube
Pre-order
448,000
Factory Lead Time:22-26 weeks
4,480+$1.85
- +
Ext. Price(USD):$8,288.00
MOQ:4,480
Mult:4,480
SPQ:4,480
Wire-to-Board Header 4 POS 4.2mm Solder Right Angle Side Entry TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.4502
- +
Ext. Price(USD):$4,176.57
MOQ:2,880
Mult:2,880
SPQ:960
Molex
ECAD Model:
Conn Wire to Board HDR 8 POS 1.5mm Solder ST Top Entry SMD Pico-SPOX™ T/R
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.375
6,000+$0.34
- +
Ext. Price(USD):$1,125.00
MOQ:3,000
Mult:3,000
SPQ:3,000
Unshrouded HDR 10 POS 2.54mm Solder ST Top Entry SMD BergStik T/R
Pre-order
9,600
Factory Lead Time:10-16 weeks
24+
960+$0.5804
1,280+$0.5652
- +
Ext. Price(USD):$557.18
MOQ:960
Mult:320
SPQ:320
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 24 POS 2mm Solder ST Thru-Hole MicroClasp™
Available Stock
14,318
Estimated Ship Time:14-17 working days
100+$0.4014
300+$0.3439
4,000+$0.2714
5,000+$0.2714
- +
Ext. Price(USD):$50.17
MOQ:125
Mult:1
SPQ:1
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.8879
- +
Ext. Price(USD):$1,331.85
MOQ:1,500
Mult:500
SPQ:500
Pre-order
67,500
Factory Lead Time:22-26 weeks
675+$1.375
1,350+$1.2
10,125+$1.025
25,650+$0.8625
- +
Ext. Price(USD):$928.12
MOQ:675
Mult:675
JST
ECAD Model:
Board to Board Connector RCP 4 POS 2mm Solder RA Thru-Hole Box
Available Stock
1,005
Estimated Ship Time:6-7 working days
22+
20+$0.2452
500+$0.1206
- +
Ext. Price(USD):$4.90
MOQ:20
Mult:20
2.5mm Signal DBL-Lock 5mm Pitch 7P Post Header Assy
Pre-order
2,600,000
Factory Lead Time:25-42 weeks
26,000+$0.2947
- +
Ext. Price(USD):$7,662.20
MOQ:26,000
Mult:2,000
SPQ:2,000
Board-in Insulation Displacement Connector, 1.27mm Pitch, Ribbon Cables
Available Stock
200
Estimated Ship Time:6-7 working days
20+$0.7964
- +
Ext. Price(USD):$15.92
MOQ:20
Mult:20
25 / PageGoto