Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 POS, 4.2mm, RA, Thru-Hole
Pre-order
3,105,000
Factory Lead Time:15 weeks
6,210+$0.4196
- +
Ext. Price(USD):$2,605.71
MOQ:6,210
Mult:2,070
SPQ:2,070
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 12 Pos 2mm Solder ST Top Entry Thru-Hole
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.2814
27,000+$0.2767
45,000+$0.2697
- +
Ext. Price(USD):$2,532.60
MOQ:9,000
Mult:9,000
SPQ:9,000
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.633
- +
Ext. Price(USD):$8,328.30
MOQ:5,100
Mult:1,700
SPQ:1,700
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
3,150,000
Factory Lead Time:15 weeks
6,300+$0.9871
- +
Ext. Price(USD):$6,218.73
MOQ:6,300
Mult:6,300
SPQ:2,100
Molex
ECAD Model:
Shrouded Header HDR 9-Pin 1.5mm Solder ST Top Entry SMD CLIK-Mate T/R
Pre-order
360,000
Factory Lead Time:22-26 weeks
3,600+$0.9625
8,100+$0.85
20,700+$0.8375
- +
Ext. Price(USD):$3,465.00
MOQ:3,600
Mult:3,600
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$5.6493
- +
Ext. Price(USD):$6,101.24
MOQ:1,080
Mult:1,080
SPQ:360
Amphenol ICC T816 Series Wire-to-Board Connector, 2.54mm Pitch, 30-Pin Dual Row, Right Angle, TH
Available Stock
32
Estimated Ship Time:6-12 working days
10+$1.0932
100+$1.0021
500+$1.0021
1,000+$0.9839
2,500+$0.9839
- +
Ext. Price(USD):$24.05
MOQ:22
Mult:1
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.7027
- +
Ext. Price(USD):$3,064.86
MOQ:1,800
Mult:1,800
SPQ:600
Wire to Board Connector 3.0mm Right Angle TH Header
Pre-order
325,000
Factory Lead Time:15 weeks
650+$4.2009
- +
Ext. Price(USD):$2,730.58
MOQ:650
Mult:650
SPQ:650
Molex
ECAD Model:
Pre-order
90,000
Factory Lead Time:22-26 weeks
900+$2.325
1,800+$2.1875
- +
Ext. Price(USD):$2,092.50
MOQ:900
Mult:900
SPQ:900
JST
ECAD Model:
IDC Connector RCP 8 POS 2mm IDT RA Cable Mount Box
Available Stock
170
Estimated Ship Time:6-7 working days
20+$0.5835
- +
Ext. Price(USD):$11.67
MOQ:20
Mult:20
Molex
ECAD Model:
Pre-order
448,000
Factory Lead Time:22-26 weeks
4,480+$1.1875
- +
Ext. Price(USD):$5,320.00
MOQ:4,480
Mult:4,480
SPQ:4,480
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.955
- +
Ext. Price(USD):$2,932.50
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$6.29
- +
Ext. Price(USD):$5,661.00
MOQ:900
Mult:900
SPQ:300
SMT Type Shrouded Header
Available Stock
830
Estimated Ship Time:14-17 working days
10+$2.2345
50+$1.5385
2,000+$1.1323
4,000+$1.1289
- +
Ext. Price(USD):$51.39
MOQ:23
Mult:1
SPQ:1
Female Wire-to-Board Connector
Available Stock
973
Estimated Ship Time:4-6 working days
25+
1+$0.2835
100+$0.2582
- +
Ext. Price(USD):$0.28
MOQ:1
Mult:1
SPQ:1
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.8669
- +
Ext. Price(USD):$5,280.21
MOQ:900
Mult:900
SPQ:300
Pre-order
37,500
Factory Lead Time:22-26 weeks
375+$3.55
- +
Ext. Price(USD):$1,331.25
MOQ:375
Mult:375
JST
ECAD Model:
Disconnectable Insulation Displacement Connector, 1.25mm Pitch
Available Stock
129
Estimated Ship Time:4-6 working days
26+
1+$1.0626
- +
Ext. Price(USD):$1.06
MOQ:1
Mult:1
SPQ:1
Wire-to-Board Connector HDR, 10 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
765,000
Factory Lead Time:15 weeks
1,530+$3.2155
- +
Ext. Price(USD):$4,919.71
MOQ:1,530
Mult:1,530
SPQ:510
Wire-to-Board HDR, 14 Pos, 3mm Pitch, Solder, ST, Top Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.7043
- +
Ext. Price(USD):$2,300.80
MOQ:1,350
Mult:1,350
SPQ:450
Connector Through-Hole Type Shrouded Header
Available Stock
3,046
Estimated Ship Time:6-7 working days
22+
20+$0.2685
336+$0.1085
- +
Ext. Price(USD):$5.37
MOQ:20
Mult:20
Conn Shrouded Header HDR 14 POS 2mm Solder RA Thru-Hole Box
Available Stock
2,250
Estimated Ship Time:6-7 working days
22+
250+$0.1573
- +
Ext. Price(USD):$39.32
MOQ:250
Mult:250
JST
ECAD Model:
IDC Connector Receptacle, 20 Pos, 2.54mm, Solder RA, Thru-Hole
Pre-order
16,000
Factory Lead Time:18-22 weeks
26+
1,600+$1.1382
4,800+$1.1193
8,000+$1.0908
- +
Ext. Price(USD):$1,821.12
MOQ:1,600
Mult:1,600
SPQ:1,600
Conn Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
264
Estimated Ship Time:14-17 working days
100+$0.3494
300+$0.2946
4,000+$0.2293
5,000+$0.2293
- +
Ext. Price(USD):$50.31
MOQ:144
Mult:1
SPQ:1
25 / PageGoto