Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
400,000
Factory Lead Time:15 weeks
800+$1.0864
- +
Ext. Price(USD):$869.12
MOQ:800
Mult:800
SPQ:400
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9088
- +
Ext. Price(USD):$1,226.88
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 24 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
315,000
Factory Lead Time:15 weeks
630+$9.1521
- +
Ext. Price(USD):$5,765.82
MOQ:630
Mult:630
SPQ:210
Flex Connector, 0.50mm Pitch, 4.85mm H, Vertical ZIF Autolock, 60-Pos
Pre-order
3,500,000
Factory Lead Time:10 weeks
7,000+$2.688
- +
Ext. Price(USD):$18,816.00
MOQ:7,000
Mult:7,000
SPQ:7,000
Conn Shrouded Header HDR 20 POS 1.5mm Solder ST Thru-Hole Box
Available Stock
260
Estimated Ship Time:14-17 working days
50+$0.7946
100+$0.6845
2,000+$0.5899
4,000+$0.5876
- +
Ext. Price(USD):$50.05
MOQ:63
Mult:1
SPQ:1
Wire-to-Board HDR 2 POS 4.2mm Solder RA Side Entry TH
Pre-order
3,105,000
Factory Lead Time:15 weeks
6,210+$0.376
- +
Ext. Price(USD):$2,334.96
MOQ:6,210
Mult:6,210
SPQ:2,070
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.1665
- +
Ext. Price(USD):$5,949.15
MOQ:5,100
Mult:1,700
SPQ:1,700
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.437
- +
Ext. Price(USD):$1,048.80
MOQ:2,400
Mult:1,200
SPQ:1,200
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2622
- +
Ext. Price(USD):$1,135.98
MOQ:900
Mult:900
SPQ:300
Amphenol
Package:SMD,P=1mm
ECAD Model:
Pre-order
2,500,000
Factory Lead Time:14 weeks
5,000+$0.6528
- +
Ext. Price(USD):$3,264.00
MOQ:5,000
Mult:5,000
SPQ:5,000
Wire-to-Board HDR, 24 Pos, 3mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.515
- +
Ext. Price(USD):$4,745.25
MOQ:1,350
Mult:450
SPQ:450
Wire-to-Board HDR 22 POS 3mm Solder ST Top Entry TH Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.0177
- +
Ext. Price(USD):$2,723.89
MOQ:1,350
Mult:1,350
SPQ:450
Conn Socket Strip SKT 48 POS 2mm Solder RA Thru-Hole Tube
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$5.55
5,004+$4.4375
10,008+$3.8875
25,008+$3.55
50,004+$3.325
- +
Ext. Price(USD):$9,990.00
MOQ:1,800
Mult:1,800
SPQ:1,800
Conn Board Stacker HDR 10POS 2mm Solder ST Top Entry SMD Tube
Available Stock
48
Estimated Ship Time:4-6 working days
13+
1+$2.3886
- +
Ext. Price(USD):$2.38
MOQ:1
Mult:1
SPQ:1
TUBE PACKING AMP CT CONN. POST HDR ASSY STD-V DIP
Pre-order
375,000
Factory Lead Time:22-26 weeks
3,750+$0.4375
5,000+$0.3738
500,000+$0.2063
750,000+$0.1913
- +
Ext. Price(USD):$1,640.62
MOQ:3,750
Mult:3,750
Conn Wire to Board HDR 8 POS 2.5mm Solder ST Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:25-42 weeks
4,500+$0.6697
- +
Ext. Price(USD):$3,013.65
MOQ:4,500
Mult:4,500
SPQ:4,500
Header, 2.54mm Pitch, SMD, Vertical, 30 Circuits
Pre-order
1,000,000
Factory Lead Time:6-8 weeks
26+
10,000+$1.0247
30,000+$0.9837
50,000+$0.9427
- +
Ext. Price(USD):$10,247.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Shrouded Header (4 Sides), HDR 2 Pos, 2.5mm Pitch, Solder, ST, Top Entry, Thru-Hole
Available Stock
16,296
Estimated Ship Time:6-7 working days
25+
20+$0.0612
1,000+$0.0216
- +
Ext. Price(USD):$1.22
MOQ:20
Mult:20
Molex
ECAD Model:
Pre-order
150,000
Factory Lead Time:22-26 weeks
1,500+$1.7
4,000+$1.4875
10,000+$1.45
- +
Ext. Price(USD):$2,550.00
MOQ:1,500
Mult:1,500
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.626
- +
Ext. Price(USD):$1,463.40
MOQ:900
Mult:900
SPQ:300
Conn Shrouded Header HDR 2 POS 5.08mm Solder RA Thru-Hole
Available Stock
762
Estimated Ship Time:6-12 working days
1+$0.4575
250+$0.427
500+$0.4193
1,000+$0.4117
5,000+$0.4117
- +
Ext. Price(USD):$24.24
MOQ:53
Mult:1
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.438
- +
Ext. Price(USD):$2,588.40
MOQ:1,800
Mult:1,800
SPQ:600
Truck Bus and Off-Road Headers
Pre-order
238,700
Factory Lead Time:16-20 weeks
2,387+$1.2412
- +
Ext. Price(USD):$2,962.74
MOQ:2,387
Mult:2,387
Shrouded Header (4 Sides), HDR, 12 Pos, 2.54mm, Solder, ST Top Entry, Thru-Hole
Pre-order
250,000
Factory Lead Time:22-26 weeks
2,500+$2.8875
5,000+$2.6125
10,000+$2.375
25,000+$2.2125
50,000+$2.0875
- +
Ext. Price(USD):$7,218.75
MOQ:2,500
Mult:2,500
SPQ:2,500
JST
ECAD Model:
Board-In Insulation Displacement Connectors, 2.0mm Pitch
Available Stock
36,000
Estimated Ship Time:6-7 working days
25+
2,000+$0.0771
- +
Ext. Price(USD):$154.20
MOQ:2,000
Mult:2,000
25 / PageGoto