Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 27 Pos 2.54mm Solder RA Thru-Hole
Pre-order
500,000
Factory Lead Time:22-26 weeks
5,000+$3.7625
10,000+$3.6625
25,000+$3.05
- +
Ext. Price(USD):$18,812.50
MOQ:5,000
Mult:5,000
SPQ:5,000
Molex
ECAD Model:
Pre-order
180,000
Factory Lead Time:22-26 weeks
1,800+$1.0125
4,000+$0.875
10,000+$0.8625
- +
Ext. Price(USD):$1,822.50
MOQ:1,800
Mult:1,800
Dinkle
ECAD Model:
Conn Wire to Board HDR 3 POS 5.08mm Solder Lug ST Panel Mount
Available Stock
200
Estimated Ship Time:3-4 weeks
26+
100+$1.162
- +
Ext. Price(USD):$116.20
MOQ:100
Mult:50
SPQ:100
Molex
ECAD Model:
Pre-order
35,000
Factory Lead Time:22-26 weeks
350+$1.375
1,400+$1.3
- +
Ext. Price(USD):$481.25
MOQ:350
Mult:350
SPQ:350
Molex
ECAD Model:
Wire-to-Board Connector, 10 Power Pos, 2mm/2.5mm Pitch, Solder, Right Angle, Thru-Hole, Tray
Pre-order
56,000
Factory Lead Time:22-26 weeks
560+$9.0625
1,200+$7.9375
3,000+$7.7625
- +
Ext. Price(USD):$5,075.00
MOQ:560
Mult:560
CT P/HDR ASSY 3P V W/O KINK T
Pre-order
450,000
Factory Lead Time:22-26 weeks
4,500+$0.225
9,000+$0.2013
10,020+$0.1788
25,020+$0.1475
50,040+$0.1413
- +
Ext. Price(USD):$1,012.50
MOQ:4,500
Mult:4,500
SPQ:4,500
Conn Wire to Board HDR 24 POS 3mm Solder RA Side Entry Thru-Hole Tray
Pre-order
225,000
Factory Lead Time:15 weeks
450+$1.0027
- +
Ext. Price(USD):$902.43
MOQ:900
Mult:450
SPQ:450
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$3.0171
- +
Ext. Price(USD):$2,715.39
MOQ:900
Mult:900
SPQ:450
Connectors, 2.5mm Pitch, Disconnectable, Crimp Style
Available Stock
471
Estimated Ship Time:6-7 working days
20+$0.5384
- +
Ext. Price(USD):$10.76
MOQ:20
Mult:20
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.7479
- +
Ext. Price(USD):$1,573.11
MOQ:900
Mult:300
SPQ:300
Molex
ECAD Model:
2.00mm Pitch Milli Grid PCB Header Dual Row Vertical TH, Tin Plated w/Peg, 2.60mm Tail, Pick & Place Cap, 30 Circuits, Glow Wire, Tube
Pre-order
560,000
Factory Lead Time:22-26 weeks
5,600+$1.4
- +
Ext. Price(USD):$7,840.00
MOQ:5,600
Mult:5,600
SPQ:5,600
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3102
- +
Ext. Price(USD):$3,118.77
MOQ:1,350
Mult:1,350
SPQ:450
PCB Housing, Rated Cross Section: 2.5 mm, colour: Black, rated_current: 16 A, rated_voltage(III/2): 320 V, : , Number of Potentials: 4, Number of Rows: 1, number_of_bits: 4, Connection Quantity: 4, Product Series: ICC..-H/..L5,0, : 5 mm, install: Wave Soldering, Pin Arrangement: Linear Arrangement, Soldering pins[P]: 3.5 mm, Number of solder pins per potential: 1, Pin Connector Style Alignment: standard, interlock: Snap-in Locking, install: Without, Packaging Type: boxed, Product has pin header output on the left side
Available Stock
35
Estimated Ship Time:4-6 working days
26+
1+$2.7921
- +
Ext. Price(USD):$2.79
MOQ:1
Mult:1
SPQ:1
Shrouded Header HDR 10 POS 2mm Solder RA Side Entry SMD
Available Stock
1,000
Estimated Ship Time:14-17 working days
50+$0.7823
100+$0.6426
4,000+$0.5006
10,000+$0.4995
- +
Ext. Price(USD):$50.06
MOQ:64
Mult:1
SPQ:1
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.3081
- +
Ext. Price(USD):$924.30
MOQ:3,000
Mult:1,500
SPQ:500
JST
ECAD Model:
Conn Shrouded Header HDR 6 POS 2mm Solder RA Thru-Hole Box
Available Stock
8,000
Estimated Ship Time:4-6 working days
500+$0.0434
- +
Ext. Price(USD):$21.70
MOQ:500
Mult:500
SPQ:500
Molex
ECAD Model:
Conn Board to Board RCP 8Power POS 2mm/2.5mm Solder RA Side Entry Thru-Hole EXTreme LPHPower™ Tray
Pre-order
90,000
Factory Lead Time:22-26 weeks
900+$6.75
2,000+$5.9125
5,000+$5.775
- +
Ext. Price(USD):$6,075.00
MOQ:900
Mult:900
1.5mm AMP Mini CT
Pre-order
1,380,000
Factory Lead Time:22-26 weeks
13,800+$0.55
25,000+$0.45
1,000,000+$0.3038
2,000,000+$0.2875
- +
Ext. Price(USD):$7,590.00
MOQ:13,800
Mult:13,800
JST
ECAD Model:
Connector 2.0mm Pitch Disconnectable Crimp Style
Available Stock
770
Estimated Ship Time:4-6 working days
770+$0.7942
- +
Ext. Price(USD):$611.53
MOQ:770
Mult:770
SPQ:770
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7524
- +
Ext. Price(USD):$3,715.74
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.2448
- +
Ext. Price(USD):$1,493.76
MOQ:1,200
Mult:400
SPQ:400
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 18 POS 2mm Solder ST Top Entry SMD Tube
Pre-order
546,000
Factory Lead Time:22-26 weeks
5,460+$1.7
- +
Ext. Price(USD):$9,282.00
MOQ:5,460
Mult:5,460
SPQ:5,460
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.1494
- +
Ext. Price(USD):$4,251.69
MOQ:1,350
Mult:450
SPQ:450
Available Stock
423
Estimated Ship Time:14-17 working days
10+$1.7879
50+$1.0919
1,000+$0.7921
2,000+$0.7886
- +
Ext. Price(USD):$50.06
MOQ:28
Mult:1
SPQ:1
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9063
- +
Ext. Price(USD):$2,573.50
MOQ:1,350
Mult:1,350
SPQ:450
25 / PageGoto