Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.4649
- +
Ext. Price(USD):$1,255.23
MOQ:2,700
Mult:900
SPQ:900
Molex
ECAD Model:
Conn Unshrouded Header HDR 27 POS 2.54mm Solder RA Thru-Hole C-Grid III™ Tray
Pre-order
288,000
Factory Lead Time:22-26 weeks
2,880+$2.1875
- +
Ext. Price(USD):$6,300.00
MOQ:2,880
Mult:2,880
SPQ:2,880
Molex
ECAD Model:
Pre-order
588,000
Factory Lead Time:22-26 weeks
5,880+$1.475
- +
Ext. Price(USD):$8,673.00
MOQ:5,880
Mult:5,880
SPQ:5,880
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 15 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
1,350
Estimated Ship Time:4-6 working days
150+$0.6197
- +
Ext. Price(USD):$92.95
MOQ:150
Mult:150
SPQ:150
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.0368
- +
Ext. Price(USD):$6,333.12
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Conn Shrouded Header HDR 3 POS 6mm Solder ST Thru-Hole Box
Available Stock
117
Estimated Ship Time:6-7 working days
20+$11.8001
- +
Ext. Price(USD):$236.00
MOQ:20
Mult:20
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
3,690,000
Factory Lead Time:15 weeks
7,380+$0.5658
- +
Ext. Price(USD):$4,175.60
MOQ:7,380
Mult:7,380
SPQ:7,380
Conn Header SMT Type
Available Stock
2,019
Estimated Ship Time:6-7 working days
22+
20+$0.6473
500+$0.3359
- +
Ext. Price(USD):$12.94
MOQ:20
Mult:20
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4439
- +
Ext. Price(USD):$665.85
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
Through Hole Type Shrouded Header
Pre-order
45,000
Factory Lead Time:18-22 weeks
26+
4,500+$0.6302
13,500+$0.6196
22,500+$0.6039
- +
Ext. Price(USD):$2,835.90
MOQ:4,500
Mult:4,500
SPQ:4,500
Conn Shrouded Header HDR 3 POS 1.5mm Solder ST Thru-Hole Box/Tray
Pre-order
2,580,000
Factory Lead Time:22-26 weeks
25,800+$0.2563
50,000+$0.2475
1,000,000+$0.1713
2,000,000+$0.1625
- +
Ext. Price(USD):$6,612.54
MOQ:25,800
Mult:25,800
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,890,000
Factory Lead Time:15 weeks
3,780+$1.0342
- +
Ext. Price(USD):$3,909.27
MOQ:3,780
Mult:3,780
SPQ:3,780
Wire-to-Board HDR 18 Pos 4.2mm Solder ST Top Entry TH
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.398
- +
Ext. Price(USD):$1,006.56
MOQ:720
Mult:720
SPQ:360
Wire-to-Board HDR, 2 POS, 4.2mm, ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.4439
- +
Ext. Price(USD):$665.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.4958
- +
Ext. Price(USD):$7,646.22
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$0.7138
- +
Ext. Price(USD):$2,569.68
MOQ:3,600
Mult:3,600
SPQ:1,800
Molex
ECAD Model:
1.50mm Pitch, Click Mate PCB Receptacle, Single Row, SMD, Right Angle, Tin Plated, Positive Lock, 4 Circuits, Red
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.575
12,000+$0.4875
30,000+$0.475
- +
Ext. Price(USD):$3,450.00
MOQ:6,000
Mult:6,000
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1525
- +
Ext. Price(USD):$1,383.00
MOQ:1,200
Mult:1,200
SPQ:400
multicomp
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 5.08mm Solder RA Side Entry Thru-Hole
Available Stock
503
Estimated Ship Time:6-12 working days
10+$1.0937
25+$1.0499
1,000+$0.9449
1,500+$0.9449
- +
Ext. Price(USD):$24.06
MOQ:22
Mult:1
JST
ECAD Model:
Unshrouded Header, 20 POS, 2.54mm Pitch, Solder RA, Thru-Hole
Available Stock
250
Estimated Ship Time:4-6 working days
250+$1.1808
- +
Ext. Price(USD):$295.20
MOQ:250
Mult:250
SPQ:250
PIN HEADER, 72POS, 2ROW, 2.54MM, THT;
Available Stock
19
Estimated Ship Time:6-12 working days
1+$14.2753
10+$14.0204
250+$13.7655
500+$13.7655
- +
Ext. Price(USD):$28.55
MOQ:2
Mult:1
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.4649
- +
Ext. Price(USD):$1,255.23
MOQ:2,700
Mult:900
SPQ:900
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8409
- +
Ext. Price(USD):$1,009.08
MOQ:1,200
Mult:1,200
SPQ:400
Conn Shrouded Header HDR 14 POS 2mm Solder ST Thru-Hole Box
Pre-order
54,000
Factory Lead Time:16-18 weeks
5,400+$0.5223
- +
Ext. Price(USD):$2,820.42
MOQ:5,400
Mult:5,400
JST
ECAD Model:
Shrouded Header (4 Sides) HDR 10 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.1615
27,000+$0.1588
45,000+$0.1548
- +
Ext. Price(USD):$1,453.50
MOQ:9,000
Mult:9,000
SPQ:9,000
25 / PageGoto