Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Conn Shrouded Header (4 Sides) HDR 3 POS 3.96mm Solder ST Top Entry Thru-Hole Box
Available Stock
187
Estimated Ship Time:6-7 working days
20+$0.3377
- +
Ext. Price(USD):$6.75
MOQ:20
Mult:20
JST
ECAD Model:
Shrouded Header HDR 5 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
11,883
Estimated Ship Time:5-9 working days
22+
10+$0.1581
50+$0.1222
150+$0.1201
- +
Ext. Price(USD):$1.58
MOQ:10
Mult:5
SPQ:1,000
Conn Shrouded Header HDR 2 POS 1.25mm Solder ST Top Entry SMD T/R
Available Stock
2,494
Estimated Ship Time:14-17 working days
100+$0.3206
300+$0.2644
5,000+$0.1966
10,000+$0.1955
- +
Ext. Price(USD):$50.01
MOQ:156
Mult:1
SPQ:1
Molex
ECAD Model:
Wire to Board HDR 22 POS 1.25mm Solder ST Top Entry SMD T/R
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$1.675
4,000+$1.4625
10,000+$1.425
- +
Ext. Price(USD):$3,350.00
MOQ:2,000
Mult:2,000
Pre-order
1,200,000
Factory Lead Time:9 weeks
2,400+$3.635
- +
Ext. Price(USD):$8,724.00
MOQ:2,400
Mult:600
SPQ:600
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
2,250,000
Factory Lead Time:15 weeks
4,500+$0.8757
- +
Ext. Price(USD):$3,940.65
MOQ:4,500
Mult:4,500
SPQ:4,500
Conn Shrouded Header HDR 5 POS 1.5mm Solder ST SMD T/R
Available Stock
244
Estimated Ship Time:6-7 working days
20+$0.681
- +
Ext. Price(USD):$13.62
MOQ:20
Mult:20
Conn Shrouded Header HDR 20 POS 5.08mm Solder RA Thru-Hole Box
Available Stock
42
Estimated Ship Time:14-17 working days
5+$6.6719
10+$5.7937
100+$4.4542
200+$4.4152
- +
Ext. Price(USD):$53.37
MOQ:8
Mult:1
SPQ:1
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.3771
- +
Ext. Price(USD):$1,239.39
MOQ:900
Mult:900
SPQ:300
Pre-order
200,000
Factory Lead Time:22-26 weeks
2,000+$0.1938
8,000+$0.1825
10,000+$0.1763
25,000+$0.1475
- +
Ext. Price(USD):$387.60
MOQ:2,000
Mult:2,000
SPQ:2,000
JST
ECAD Model:
Conn Wire to Board HDR 3 POS 3.96mm Solder ST Thru-Hole T/R
Available Stock
1,000
Estimated Ship Time:6-7 working days
23+
250+$0.1233
- +
Ext. Price(USD):$30.82
MOQ:250
Mult:250
Molex
ECAD Model:
Pre-order
57,000
Factory Lead Time:22-26 weeks
570+$2.6375
1,140+$2.4875
- +
Ext. Price(USD):$1,503.37
MOQ:570
Mult:570
SPQ:570
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$2.2754
- +
Ext. Price(USD):$3,413.10
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR, 22 POS, 3mm, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.5139
- +
Ext. Price(USD):$3,393.76
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.5727
- +
Ext. Price(USD):$773.14
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Pre-order
55,000
Factory Lead Time:22-26 weeks
550+$2.325
1,100+$2.2375
2,500+$1.95
5,000+$1.8125
- +
Ext. Price(USD):$1,278.75
MOQ:550
Mult:550
SPQ:550
Conn Wire to Board HDR 4 POS 3.81mm Solder ST Top Entry Thru-Hole Box
Available Stock
2,067
Estimated Ship Time:6-12 working days
50+$0.2763
100+$0.2475
500+$0.2475
1,000+$0.2431
5,000+$0.2431
- +
Ext. Price(USD):$24.03
MOQ:87
Mult:1
Conn Shrouded Header (4 Sides) HDR 11 POS 2mm Solder ST Top Entry Thru-Hole Box
Available Stock
20
Estimated Ship Time:6-7 working days
20+$1.0783
- +
Ext. Price(USD):$21.56
MOQ:20
Mult:20
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$3.4035
- +
Ext. Price(USD):$4,288.41
MOQ:1,260
Mult:1,260
SPQ:420
Wire-to-Board HDR 18 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.8827
- +
Ext. Price(USD):$1,191.64
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR 10 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.3265
- +
Ext. Price(USD):$2,387.70
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board HDR, 14 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, Tray
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$5.5379
- +
Ext. Price(USD):$8,223.78
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Board HDR, 24 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH
Pre-order
270,000
Factory Lead Time:15 weeks
540+$1.5181
- +
Ext. Price(USD):$819.77
MOQ:540
Mult:540
SPQ:180
Wire-to-Board Connector, 3.0mm, Right Angle SMT Tails and Hold Down Header
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$3.7813
- +
Ext. Price(USD):$11,343.90
MOQ:3,000
Mult:3,000
SPQ:600
Conn HDR & Receptacle F 8 POS 2mm Solder ST Thru-Hole 8 Terminal 1 Port
Pre-order
1,152,000
Factory Lead Time:25-42 weeks
11,520+$0.4554
- +
Ext. Price(USD):$5,246.20
MOQ:11,520
Mult:160
SPQ:160
25 / PageGoto