Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Conn Wire to Board HDR 7Power POS 5.7mm Solder RA Thru-Hole Mega-Fit Tray
Pre-order
80,000
Factory Lead Time:22-26 weeks
800+$7.0875
1,600+$6.2
4,000+$6.0625
- +
Ext. Price(USD):$5,670.00
MOQ:800
Mult:800
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.055
- +
Ext. Price(USD):$1,899.00
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1786
- +
Ext. Price(USD):$1,414.32
MOQ:1,200
Mult:1,200
SPQ:400
multicomp
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 5 POS 7.62mm Solder ST Top Entry Thru-Hole
Available Stock
587
Estimated Ship Time:6-12 working days
10+$0.9824
100+$0.9005
500+$0.9005
- +
Ext. Price(USD):$24.56
MOQ:25
Mult:1
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9063
- +
Ext. Price(USD):$2,573.50
MOQ:1,350
Mult:1,350
SPQ:450
TW - Samtec 2mm Flexible Board Stacker Surface Mount 12.37mm Overall Pin Length (04)
Pre-order
100
Factory Lead Time:8-10 weeks
50+$4.4153
100+$3.8362
34,977+$1.1412
75,626+$1.0447
- +
Ext. Price(USD):$251.67
MOQ:57
Mult:1
SPQ:1
multicomp
ECAD Model:
Shrouded Header (4 Sides) HDR 6 POS 7.62mm ST Top Entry Thru-Hole
Available Stock
278
Estimated Ship Time:6-12 working days
10+$1.2168
100+$1.195
500+$1.195
- +
Ext. Price(USD):$24.33
MOQ:20
Mult:1
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
4,050,000
Factory Lead Time:15 weeks
8,100+$1.0828
- +
Ext. Price(USD):$8,770.68
MOQ:8,100
Mult:8,100
SPQ:2,700
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 12 POS 2mm Solder RA Side Entry Thru-Hole
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$0.8375
2,400+$0.7625
2,500+$0.75
- +
Ext. Price(USD):$1,005.00
MOQ:1,200
Mult:1,200
SPQ:1,200
Conn Shrouded Header (4 Sides) M 2 POS 3.81mm Solder RA Side Entry Thru-Hole
Available Stock
445
Estimated Ship Time:6-12 working days
100+$0.2016
500+$0.1882
1,000+$0.1882
- +
Ext. Price(USD):$24.19
MOQ:120
Mult:10
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.8635
- +
Ext. Price(USD):$1,554.30
MOQ:1,800
Mult:1,800
SPQ:600
Molex
ECAD Model:
Conn Board to Board PL 50 POS 0.635mm Solder ST SMD T/R
Available Stock
45
Estimated Ship Time:3-5 working days
05+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Conn Shrouded Header HDR 15 POS 1.5mm Solder ST Thru-Hole Box/Tray
Pre-order
1,440,000
Factory Lead Time:22-26 weeks
14,400+$0.55
25,000+$0.45
1,000,000+$0.3038
2,000,000+$0.2875
- +
Ext. Price(USD):$7,920.00
MOQ:14,400
Mult:14,400
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$1.875
- +
Ext. Price(USD):$2,812.50
MOQ:1,500
Mult:1,500
SPQ:500
JST
ECAD Model:
IDC Connector RCP 9 POS 2.5mm IDT RA Cable Mount Box
Available Stock
1,250
Estimated Ship Time:4-6 working days
250+$0.4091
- +
Ext. Price(USD):$102.27
MOQ:250
Mult:250
SPQ:250
Molex
ECAD Model:
Board to Board Connector RCP 8 POS 1.6mm Solder RA Thru-Hole Tray
Available Stock
36
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Pre-order
2,000,000
Factory Lead Time:22-26 weeks
20,000+$1.075
25,000+$0.8875
1,000,000+$0.6
2,000,000+$0.5625
- +
Ext. Price(USD):$21,500.00
MOQ:20,000
Mult:20,000
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
540,000
Factory Lead Time:15 weeks
1,080+$3.9797
- +
Ext. Price(USD):$4,298.07
MOQ:1,080
Mult:1,080
SPQ:360
FFC Connector SKT 40POS 1mm THRU
Available Stock
311
Estimated Ship Time:14-17 working days
50+$0.8179
100+$0.7061
2,000+$0.6091
4,000+$0.6068
- +
Ext. Price(USD):$50.70
MOQ:62
Mult:1
SPQ:1
Wire-to-Board HDR 12 Pos 3mm Pitch Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$0.7381
- +
Ext. Price(USD):$1,771.44
MOQ:2,400
Mult:2,400
SPQ:800
Wire-to-Board Connector HDR 24-Pin 3mm Solder Straight Top Entry Thru-Hole Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.1831
- +
Ext. Price(USD):$2,947.18
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6512
- +
Ext. Price(USD):$1,758.24
MOQ:2,700
Mult:2,700
SPQ:900
Wire-to-Board HDR 14-Pin 4.2mm Solder RA Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.7666
- +
Ext. Price(USD):$6,434.91
MOQ:1,350
Mult:450
SPQ:450
Molex
ECAD Model:
Mini Mi2 1-Row Wafer Assy 2-Ckt
Available Stock
50
Estimated Ship Time:3-5 working days
05+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Header Connector, 32 Pos, 2.54mm Pitch, Solder RA Thru-Hole, 32 Terminal, 1 Port
Available Stock
6
Estimated Ship Time:3-5 working days
08+
1+$0.4344
30+$0.4271
50+$0.4121
- +
Ext. Price(USD):$0.43
MOQ:1
Mult:1
SPQ:1
25 / PageGoto