Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Vertical Header, TH
Pre-order
1,440,000
Factory Lead Time:15 weeks
2,880+$1.337
- +
Ext. Price(USD):$3,850.56
MOQ:2,880
Mult:2,880
SPQ:2,880
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0533
- +
Ext. Price(USD):$1,263.96
MOQ:1,200
Mult:400
SPQ:400
Unshrouded Header, 10 Pos, 2.54mm Pitch, Solder, ST Top Entry, Thru-Hole, Carton
Pre-order
640,000
Factory Lead Time:22-26 weeks
6,400+$1.0625
10,000+$0.825
50,000+$0.6875
100,000+$0.6
250,000+$0.5625
- +
Ext. Price(USD):$6,800.00
MOQ:6,400
Mult:6,400
SPQ:6,400
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.3084
- +
Ext. Price(USD):$6,577.56
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Wire to Board HDR 30 POS 1.25mm Solder RA SMD PanelMate T/R
Available Stock
200
Estimated Ship Time:3-5 working days
06+
10+$0.4781
100+$0.47
300+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$3.7761
- +
Ext. Price(USD):$4,531.32
MOQ:1,200
Mult:1,200
SPQ:400
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.3359
- +
Ext. Price(USD):$7,203.46
MOQ:1,350
Mult:1,350
SPQ:450
Conn Board to Board PL 20 POS 0.5mm Solder RA Side Entry SMD T/R
Pre-order
120,000
Factory Lead Time:16-18 weeks
12,000+$0.6442
- +
Ext. Price(USD):$7,730.40
MOQ:12,000
Mult:12,000
JST
ECAD Model:
Conn Socket Strip RCP 3 POS 2.5mm Solder ST Top Entry Thru-Hole
Available Stock
80
Estimated Ship Time:4-6 working days
25+
1+$0.4711
- +
Ext. Price(USD):$0.47
MOQ:1
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Socket Strip RCP 4 POS 2.5mm Solder RA Thru-Hole KK Tray
Available Stock
20
Estimated Ship Time:3-5 working days
04+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Pre-order
300,000
Factory Lead Time:22-26 weeks
3,000+$0.4125
6,000+$0.3875
- +
Ext. Price(USD):$1,237.50
MOQ:3,000
Mult:3,000
SPQ:3,000
Conn Board to Board PL 20 POS 0.5mm Solder RA Side Entry SMD T/R
Available Stock
100
Estimated Ship Time:4-6 working days
25+
1+$1.2396
- +
Ext. Price(USD):$1.23
MOQ:1
Mult:1
SPQ:1
multicomp
ECAD Model:
TERMINAL BLOCK, HEADER, 8POS, TH; Gender:Header; Pitch Spacing:5.08mm; No. of Positions:8Ways; Rated Current:16A; Rated Voltage:300V; Block Orientation:Through Hole Vertical; Product Range:-; SVHC:No SVHC (15-Jan-2019);
Available Stock
63
Estimated Ship Time:6-12 working days
10+$1.0937
25+$1.0499
1,000+$0.9449
1,500+$0.9449
- +
Ext. Price(USD):$24.06
MOQ:22
Mult:1
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 2 POS 1.5mm Solder RA Side Entry Thru-Hole Box
Available Stock
44,000
Estimated Ship Time:3-5 working days
2,000+$0.0202
6,000+$0.0198
10,000+$0.0194
- +
Ext. Price(USD):$40.40
MOQ:2,000
Mult:2,000
Conn Shrouded Header HDR 8 POS 2.2mm Solder RA Thru-Hole Automotive Tube
Pre-order
2,400,000
Factory Lead Time:22-26 weeks
24,000+$1.9625
- +
Ext. Price(USD):$47,100.00
MOQ:24,000
Mult:24,000
SPQ:24,000
JST
ECAD Model:
Conn IDC Connector RCP 5 POS 2mm IDT ST Cable Mount Automotive Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.1604
72,000+$0.1577
120,000+$0.1537
- +
Ext. Price(USD):$3,849.60
MOQ:24,000
Mult:24,000
SPQ:24,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
200
Estimated Ship Time:3-5 working days
20+
10+$0.2174
100+$0.2117
300+$0.2042
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn Wire to Board HDR 4 POS 1.25mm Solder RA SMD PanelMate T/R
Available Stock
40
Estimated Ship Time:3-5 working days
04+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Pre-order
30,000
Factory Lead Time:22-26 weeks
300+$0.7
1,200+$0.6625
- +
Ext. Price(USD):$210.00
MOQ:300
Mult:300
SPQ:300
Wire-to-Board HDR 18 Pos 4.2mm Solder RA Side Entry TH Tray
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.9018
- +
Ext. Price(USD):$5,311.62
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 20 Pos, 4.2mm Pitch, Solder, RA Side Entry, TH, T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.297
- +
Ext. Price(USD):$1,750.95
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Conn Wire to Board HDR 8 POS 4.2mm Press Fit ST Thru-Hole Tray
Pre-order
192,000
Factory Lead Time:22-26 weeks
1,920+$3.5
4,000+$3.0625
10,000+$3
- +
Ext. Price(USD):$6,720.00
MOQ:1,920
Mult:1,920
Pre-order
141,000
Factory Lead Time:22-26 weeks
1,410+$1.3375
2,820+$1.1875
5,029+$1.1125
10,011+$1.05
- +
Ext. Price(USD):$1,885.87
MOQ:1,410
Mult:1,410
SPQ:1,410
Molex
ECAD Model:
Board to Board Connector, 50 Pos, 0.4mm Pitch, Solder, Straight, SMD
Available Stock
190
Estimated Ship Time:3-5 working days
07+
10+$0.4781
100+$0.47
300+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$1.1629
- +
Ext. Price(USD):$2,825.84
MOQ:2,430
Mult:2,430
SPQ:810
25 / PageGoto