Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
3.96 Pitch Through Hole Header Assembly
Pre-order
2,800,000
Factory Lead Time:25-42 weeks
28,000+$0.1911
- +
Ext. Price(USD):$5,350.80
MOQ:28,000
Mult:4,000
SPQ:4,000
Disconnectable Crimp Style Connectors Wire-to-Board/Wire-to-Wire
Available Stock
725
Estimated Ship Time:6-7 working days
24+
20+$5.06
90+$1.3156
- +
Ext. Price(USD):$101.20
MOQ:20
Mult:20
Molex
ECAD Model:
Conn Unshrouded Header HDR 15 POS 2.54mm Solder ST Thru-Hole C-Grid III Tray
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$2.175
2,400+$2.1375
2,500+$1.85
5,000+$1.725
- +
Ext. Price(USD):$2,610.00
MOQ:1,200
Mult:1,200
SPQ:1,200
Conn Unshrouded Header HDR 30 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
25,000
Factory Lead Time:22-26 weeks
250+$4.175
500+$3.95
5,000+$2.9125
10,000+$2.2375
50,000+$1.8625
- +
Ext. Price(USD):$1,043.75
MOQ:250
Mult:250
SPQ:250
Wire-to-Board HDR, 8 Pos, 3mm Pitch, Solder, Top Entry, Thru-Hole, T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.4781
- +
Ext. Price(USD):$2,660.58
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Shrouded Header, HDR, 4 Pos, 2mm, Solder, ST, SMD, T/R
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.1481
18,000+$0.1457
30,000+$0.1419
- +
Ext. Price(USD):$888.60
MOQ:6,000
Mult:6,000
SPQ:6,000
Molex
ECAD Model:
Conn Board to Board HDR 70 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
15+
10+$0.4781
50+$0.4655
100+$0.4492
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn HDR 6 POS 6.35mm Solder ST Thru-Hole 6 Terminal 1 Port
Pre-order
68,000
Factory Lead Time:22-26 weeks
680+$0.4875
2,720+$0.4625
- +
Ext. Price(USD):$331.50
MOQ:680
Mult:680
SPQ:680
Molex
ECAD Model:
0.50mm Pitch Board-to-Board Plug, SMD, Vertical, 1.50mm Mated Height, 30 Circuits
Available Stock
10
Estimated Ship Time:3-5 working days
15+
10+$0.2175
50+$0.2118
100+$0.2043
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 9 POS 3.96mm Solder ST Thru-Hole Bag
Available Stock
24
Estimated Ship Time:3-5 working days
15+
10+$0.2174
50+$0.2117
100+$0.2042
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
JST
ECAD Model:
Wire to Board Connector HDR 3POS 3.96mm Solder ST Thru-Hole Box
Available Stock
8,384
Estimated Ship Time:6-7 working days
24+
20+$0.2401
500+$0.0978
- +
Ext. Price(USD):$4.80
MOQ:20
Mult:20
JST
ECAD Model:
Wire-to-Board Connector PL 3POS 5mm
Pre-order
20,000
Factory Lead Time:18-22 weeks
26+
2,000+$0.1435
6,000+$0.1412
10,000+$0.1375
- +
Ext. Price(USD):$287.00
MOQ:2,000
Mult:2,000
SPQ:2,000
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$9.1259
- +
Ext. Price(USD):$8,213.31
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Board to Board RCP 40 POS 0.4mm Solder ST SMD SlimStack T/R
Available Stock
90
Estimated Ship Time:3-5 working days
07+
10+$0.6091
50+$0.5988
100+$0.5778
- +
Ext. Price(USD):$6.09
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.304
- +
Ext. Price(USD):$1,173.60
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Board to Board Connector Receptacle, 40 Pos, 0.4mm Pitch, Solder, Straight, SMD, T/R
Available Stock
40
Estimated Ship Time:3-5 working days
06+
10+$0.5433
50+$0.5341
100+$0.5153
- +
Ext. Price(USD):$5.43
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$3.2259
- +
Ext. Price(USD):$4,838.85
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.6512
- +
Ext. Price(USD):$879.12
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.633
- +
Ext. Price(USD):$1,469.70
MOQ:900
Mult:300
SPQ:300
Conn Unshrouded Header HDR 8 POS 2.54mm Solder ST Thru-Hole Automotive Carton
Pre-order
640,000
Factory Lead Time:22-26 weeks
6,400+$0.5375
10,000+$0.4125
50,000+$0.345
100,000+$0.2963
250,000+$0.2763
- +
Ext. Price(USD):$3,440.00
MOQ:6,400
Mult:6,400
SPQ:6,400
Molex
ECAD Model:
1.25mm Pitch, Micro Lock Plus PCB Header, Right Angle SMD, 0.76um Gold Plating, 11 Circuits, Tape & Reel, Black
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$1.525
12,000+$1.3375
30,000+$1.3
- +
Ext. Price(USD):$7,320.00
MOQ:4,800
Mult:4,800
Conn Shrouded Header HDR 6 POS 2.54mm Solder ST Thru-Hole Box
Pre-order
5,700
Factory Lead Time:22-26 weeks
57+$1.7875
113+$1.5125
225+$1.275
500+$1.0125
1,000+$0.7875
- +
Ext. Price(USD):$101.88
MOQ:57
Mult:57
SPQ:57
Pre-order
240,000
Factory Lead Time:25-42 weeks
2,400+$0.4447
- +
Ext. Price(USD):$1,067.28
MOQ:2,400
Mult:2,400
SPQ:2,400
Wire-to-Board HDR 2 Pos 4.2mm Solder RA Side Entry TH T/R
Pre-order
1,200,000
Factory Lead Time:15 weeks
2,400+$1.0481
- +
Ext. Price(USD):$2,515.44
MOQ:2,400
Mult:2,400
SPQ:1,200
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$5.564
- +
Ext. Price(USD):$5,007.60
MOQ:900
Mult:300
SPQ:300
25 / PageGoto