Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 5 Pos 2mm Solder Straight Thru-Hole Tube
Pre-order
66,000
Factory Lead Time:22-26 weeks
660+$2.6125
1,320+$2.475
- +
Ext. Price(USD):$1,724.25
MOQ:660
Mult:660
SPQ:660
Conn HDR & Receptacle F 3 POS 2mm Solder ST Thru-Hole 3 Terminal 1 Port
Pre-order
2,592,000
Factory Lead Time:22-26 weeks
25,920+$0.2425
50,040+$0.235
100,080+$0.225
250,200+$0.205
500,040+$0.1825
- +
Ext. Price(USD):$6,285.60
MOQ:25,920
Mult:25,920
SPQ:25,920
Molex
ECAD Model:
Board-to-Board HDR 200 Pos 0.635mm Solder ST SMD SlimStack™ Tube
Available Stock
1,273
Estimated Ship Time:14-17 working days
5+$6.3335
10+$5.4238
100+$4.1004
200+$4.0589
- +
Ext. Price(USD):$50.66
MOQ:8
Mult:1
SPQ:1
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7138
- +
Ext. Price(USD):$1,070.70
MOQ:1,500
Mult:1,500
SPQ:500
Wire-to-Board HDR 14 Pos 4.2mm Solder ST Top Entry TH
Pre-order
585,000
Factory Lead Time:15 weeks
1,170+$1.149
- +
Ext. Price(USD):$1,344.33
MOQ:1,170
Mult:585
SPQ:585
Wire-to-Board HDR, 16 POS, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.2883
- +
Ext. Price(USD):$1,159.47
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 8 POS 2.5mm Solder RA Thru-Hole Bag
Available Stock
44
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.806
- +
Ext. Price(USD):$1,088.10
MOQ:1,350
Mult:450
SPQ:450
Molex
ECAD Model:
Conn Board to Board HDR 80 POS 0.64mm Solder ST SMD SlimStack™ Tube
Available Stock
12
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Through Hole Type Shrouded Header
Pre-order
80,000
Factory Lead Time:16-18 weeks
8,000+$0.1743
- +
Ext. Price(USD):$1,394.40
MOQ:8,000
Mult:8,000
JST
ECAD Model:
CONN Wire to Board Connector RCP 5POS 3.81mm CRMP THRU
Available Stock
600
Estimated Ship Time:14-17 working days
1+$1.5618
50+$1.1289
2,000+$0.7933
4,000+$0.791
- +
Ext. Price(USD):$51.53
MOQ:33
Mult:1
SPQ:1
Wire-to-Board Connector, 3 Pos, 5mm Pitch, Solder, Straight, Top Entry, Thru-Hole, Medical
Available Stock
31
Estimated Ship Time:7-12 working days
10+$15.4209
25+$13.8393
- +
Ext. Price(USD):$246.73
MOQ:16
Mult:1
SPQ:1
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$8.4958
- +
Ext. Price(USD):$7,646.22
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 16 Pos 3mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$1.9063
- +
Ext. Price(USD):$2,573.50
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Shrouded Header HDR 2 POS 2mm Solder RA Side Entry Thru-Hole Box
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0269
72,000+$0.0265
120,000+$0.0258
- +
Ext. Price(USD):$645.60
MOQ:24,000
Mult:24,000
SPQ:24,000
Molex
ECAD Model:
Conn Wire to Wire Adapter M/M 11 POS 2mm ST Panel Mount Mi II Bag
Available Stock
30
Estimated Ship Time:3-5 working days
15+
10+$1.2172
30+$1.185
50+$1.1435
- +
Ext. Price(USD):$12.17
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$7.634
- +
Ext. Price(USD):$6,870.60
MOQ:900
Mult:900
SPQ:300
Molex
ECAD Model:
Conn Board to Board RCP 120 Pos 0.4mm Solder ST SMD SlimStack T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR, 18-Pos, 4.2mm, Solder, ST Top Entry, TH, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$0.9435
- +
Ext. Price(USD):$849.15
MOQ:900
Mult:900
SPQ:300
JST
ECAD Model:
Shrouded Header, 3-Sides, HDR, 6-Pos, 2.5mm, Solder, ST, Top Entry, Thru-Hole
Pre-order
180,000
Factory Lead Time:16-18 weeks
18,000+$0.333
- +
Ext. Price(USD):$5,994.00
MOQ:18,000
Mult:18,000
Connector Socket Strip RCP 24 2mm Solder Straight Surface Mount Tape and Reel
Pre-order
1,500,000
Factory Lead Time:8 weeks
3,000+$2.3781
- +
Ext. Price(USD):$7,134.30
MOQ:3,000
Mult:3,000
SPQ:3,000
Wire-to-Board Connector HDR 4 POS 3.96mm Solder Straight Thru-Hole Box
Available Stock
500
Estimated Ship Time:6-7 working days
23+
500+$0.1632
- +
Ext. Price(USD):$81.60
MOQ:500
Mult:500
Molex
ECAD Model:
Pre-order
448,000
Factory Lead Time:22-26 weeks
4,480+$2.2125
- +
Ext. Price(USD):$9,912.00
MOQ:4,480
Mult:4,480
SPQ:4,480
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
2,700,000
Factory Lead Time:15 weeks
5,400+$0.6998
- +
Ext. Price(USD):$3,778.92
MOQ:5,400
Mult:5,400
SPQ:1,800
Wire-to-Board Connector Header 10 Pos 4.2mm Pitch Solder RA Side Entry TH
Pre-order
630,000
Factory Lead Time:15 weeks
1,260+$0.6946
- +
Ext. Price(USD):$875.19
MOQ:1,260
Mult:1,260
SPQ:420
25 / PageGoto