Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1368
- +
Ext. Price(USD):$1,023.12
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR, 16 Pos, 4.2mm, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$5.6023
- +
Ext. Price(USD):$7,563.10
MOQ:1,350
Mult:1,350
SPQ:450
JST
ECAD Model:
Wire-to-Wire Connector HDR 19 Pos 1mm IDT ST Cable Mount Box
Available Stock
1,500
Estimated Ship Time:4-6 working days
150+$0.4269
- +
Ext. Price(USD):$64.03
MOQ:150
Mult:150
SPQ:150
Molex
ECAD Model:
Board to Board Connector, 40 Pos, 0.5mm Pitch, Solder, Surface Mount, SlimStack, T/R
Available Stock
29
Estimated Ship Time:3-5 working days
04+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Molex
ECAD Model:
Conn Board to Board HDR 16 POS 0.4mm Solder ST SMD SlimStack™ T/R
Available Stock
50
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Wire Connector HDR 29 Pos 1mm IDT ST Cable Mount Box
Available Stock
1,720
Estimated Ship Time:6-7 working days
22+
20+$0.8967
100+$0.4658
- +
Ext. Price(USD):$17.93
MOQ:20
Mult:20
Conn High Performance Interconnect HDR 13 POS 1.5mm Solder ST SMD Box/Tube
Pre-order
2,500,000
Factory Lead Time:22-26 weeks
25,000+$1
50,000+$0.8875
1,000,000+$0.8
2,000,000+$0.775
- +
Ext. Price(USD):$25,000.00
MOQ:25,000
Mult:25,000
Wire-to-Board Connector, Header, 6 Pos, 4.2mm Pitch, Solder, Right Angle, Side Entry, TH, Tray
Pre-order
1,260,000
Factory Lead Time:15 weeks
2,520+$0.5571
- +
Ext. Price(USD):$1,403.89
MOQ:2,520
Mult:2,520
SPQ:840
Molex
ECAD Model:
IDC Connector F 2 POS 2.54mm IDT RA Cable Mount KK Bag
Available Stock
20
Estimated Ship Time:3-5 working days
08+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.3102
- +
Ext. Price(USD):$3,118.77
MOQ:1,350
Mult:1,350
SPQ:450
Available Stock
1,400
Estimated Ship Time:5-7 working days
12+$4.4287
500+$3.2553
- +
Ext. Price(USD):$53.14
MOQ:12
Mult:1
SPQ:120
Molex
ECAD Model:
IDC Connector F 20 Pos 2.5mm IDT RA Cable Mount Tray
Pre-order
4,800,000
Factory Lead Time:22-26 weeks
48,000+$2.0125
80,000+$1.95
- +
Ext. Price(USD):$96,600.00
MOQ:48,000
Mult:48,000
SPQ:48,000
Pre-order
70,000
Factory Lead Time:22-26 weeks
700+$3.0875
1,050+$2.75
5,250+$2.575
10,150+$2.4125
- +
Ext. Price(USD):$2,161.25
MOQ:700
Mult:700
SPQ:700
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.5449
- +
Ext. Price(USD):$817.35
MOQ:1,500
Mult:1,500
SPQ:500
Pre-order
240,000
Factory Lead Time:22-26 weeks
2,400+$3.525
5,004+$3.2875
10,008+$3.1
- +
Ext. Price(USD):$8,460.00
MOQ:2,400
Mult:2,400
SPQ:2,400
Wire-to-Board Connector HDR, 16 POS, 3mm Pitch, Solder, ST Top Entry, Thru-Hole
Pre-order
945,000
Factory Lead Time:15 weeks
1,890+$1.7444
- +
Ext. Price(USD):$3,296.91
MOQ:1,890
Mult:1,890
SPQ:630
Wire-to-Board HDR 20 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.024
- +
Ext. Price(USD):$4,082.40
MOQ:1,350
Mult:1,350
SPQ:450
Molex
ECAD Model:
Wire-to-Board Connector, 6 Power Pos, 2mm/2.5mm Pitch, Solder, Right Angle, Thru-Hole, Tray
Available Stock
403
Estimated Ship Time:6-12 working days
1+$10.4294
10+$9.7341
250+$9.3865
500+$9.3865
- +
Ext. Price(USD):$31.28
MOQ:3
Mult:1
Wire-to-Board HDR 16 Pos 4.2mm Solder ST Top Entry TH
Pre-order
742,500
Factory Lead Time:15 weeks
1,485+$1.3022
- +
Ext. Price(USD):$1,933.76
MOQ:1,485
Mult:1,485
SPQ:495
Wire-to-Wire Connector HDR 9 Pos 1mm IDT ST Cable Mount Box
Available Stock
3,250
Estimated Ship Time:6-7 working days
22+
250+$0.203
- +
Ext. Price(USD):$50.75
MOQ:250
Mult:250
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.1665
- +
Ext. Price(USD):$1,399.80
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Shrouded Header (4 Sides) HDR 9 POS 2mm Solder ST Thru-Hole Tube
Pre-order
18,000
Factory Lead Time:22-26 weeks
180+$2.6125
720+$2.475
- +
Ext. Price(USD):$470.25
MOQ:180
Mult:180
SPQ:180
Molex
ECAD Model:
Board-to-Board Connector Receptacle 34 Pos 0.4mm Pitch Solder Straight SMD SlimStack T/R
Available Stock
40
Estimated Ship Time:3-5 working days
06+
10+$0.3478
50+$0.3418
100+$0.3297
- +
Ext. Price(USD):$3.47
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.6998
- +
Ext. Price(USD):$944.73
MOQ:1,350
Mult:1,350
SPQ:450
Through Hole Type Shrouded Header
Available Stock
1,000
Estimated Ship Time:14-17 working days
50+$0.5891
100+$0.5055
4,000+$0.3492
5,000+$0.3492
- +
Ext. Price(USD):$50.07
MOQ:85
Mult:1
SPQ:1
25 / PageGoto