Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Pre-order
160,000
Factory Lead Time:22-26 weeks
1,600+$2.875
5,000+$2.6875
10,000+$2.525
- +
Ext. Price(USD):$4,600.00
MOQ:1,600
Mult:1,600
SPQ:1,600
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7242
- +
Ext. Price(USD):$869.04
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 11 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
10
Estimated Ship Time:3-5 working days
08+
10+$1.217
30+$1.1965
50+$1.1545
- +
Ext. Price(USD):$12.17
MOQ:10
Mult:10
SPQ:10
Shrouded Header THT Type
Available Stock
280
Estimated Ship Time:14-17 working days
100+$0.2781
500+$0.2477
1,000+$0.2388
2,000+$0.2257
4,000+$0.2245
- +
Ext. Price(USD):$50.05
MOQ:180
Mult:1
SPQ:1
Wire-to-Board HDR, 22 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
360,000
Factory Lead Time:15 weeks
720+$1.5355
- +
Ext. Price(USD):$1,105.56
MOQ:720
Mult:720
SPQ:240
Wire-to-Board HDR 12 Pos 3mm Solder ST Top Entry TH Tray
Pre-order
1,215,000
Factory Lead Time:15 weeks
2,430+$1.1629
- +
Ext. Price(USD):$2,825.84
MOQ:2,430
Mult:2,430
SPQ:810
Molex
ECAD Model:
1.25mm Pitch, Micro Lock Plus PCB Header, Vertical SMD, 0.76um Gold Plating, 10 Circuits, Tape & Reel, Black
Pre-order
480,000
Factory Lead Time:22-26 weeks
4,800+$1.35
12,000+$1.175
30,000+$1.15
- +
Ext. Price(USD):$6,480.00
MOQ:4,800
Mult:4,800
Wire-to-Board HDR 12-Pin 4.2mm Solder Right Angle Side Entry TH
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.9833
- +
Ext. Price(USD):$5,377.45
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 4 Pos, 4.2mm Pitch, Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.4996
- +
Ext. Price(USD):$674.46
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Connector
Pre-order
600
Factory Lead Time:22-26 weeks
6+$306.925
11+$274.1875
50+$176.1
100+$151.525
250+$143.35
- +
Ext. Price(USD):$1,841.55
MOQ:6
Mult:6
SPQ:6
JST
ECAD Model:
Connector 2.0mm Pitch Disconnectable Crimp Style
Available Stock
72
Estimated Ship Time:4-6 working days
25+
1+$1.3282
- +
Ext. Price(USD):$1.32
MOQ:1
Mult:1
SPQ:1
Conn Wire to Board M 22 POS 3mm Solder ST Top Entry Thru-Hole T/R
Available Stock
844
Estimated Ship Time:6-12 working days
10+$1.7024
100+$1.672
250+$1.672
500+$1.6416
1,000+$1.6416
- +
Ext. Price(USD):$25.53
MOQ:15
Mult:1
Elevated Socket Connector, SKT, 20 POS, 2mm Pitch, Solder ST Top Entry TH, Bulk
Pre-order
100
Factory Lead Time:8-10 weeks
1+$10.8572
25+$10.4471
19,500+$2.0508
42,250+$1.8674
- +
Ext. Price(USD):$260.57
MOQ:24
Mult:1
SPQ:1
JST
ECAD Model:
IDC Connector RCP 7 POS 2.5mm IDT ST Cable Mount Box
Pre-order
90,000
Factory Lead Time:18-22 weeks
26+
9,000+$0.0953
27,000+$0.0937
45,000+$0.0913
- +
Ext. Price(USD):$857.70
MOQ:9,000
Mult:9,000
SPQ:9,000
JST
ECAD Model:
Board-to-Board Connector, 1.25mm Pitch, High Density
Available Stock
100
Estimated Ship Time:4-6 working days
26+
1+$0.5313
- +
Ext. Price(USD):$0.53
MOQ:1
Mult:1
SPQ:1
JST
ECAD Model:
Board-to-Board Connector PL 30 POS 1.27mm Solder RA Thru-Hole Box
Pre-order
16,660
Factory Lead Time:18-22 weeks
26+
1,666+$3.3642
4,998+$3.3081
8,330+$3.2241
- +
Ext. Price(USD):$5,604.75
MOQ:1,666
Mult:1,666
SPQ:1,666
Wire-to-Board HDR, 10 POS, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0446
- +
Ext. Price(USD):$1,253.52
MOQ:1,200
Mult:1,200
SPQ:400
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Header, Dual Row, Right Angle, SMT
Pre-order
1,500,000
Factory Lead Time:15 weeks
3,000+$2.9543
- +
Ext. Price(USD):$8,862.90
MOQ:3,000
Mult:3,000
SPQ:600
Molex
ECAD Model:
Shrouded Header HDR 12 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
44
Estimated Ship Time:3-5 working days
06+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board HDR Connector 22 Pos 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.1107
- +
Ext. Price(USD):$999.63
MOQ:900
Mult:900
SPQ:300
42-Pin, 2mm Connector Header
Pre-order
76,000
Factory Lead Time:22-26 weeks
760+$3.7
1,140+$3.5
5,320+$3.2625
10,260+$3.075
- +
Ext. Price(USD):$2,812.00
MOQ:760
Mult:760
SPQ:760
Conn Unshrouded Header HDR 3 POS 2.54mm Solder ST Thru-Hole Carton
Pre-order
2,160,000
Factory Lead Time:22-26 weeks
21,600+$0.375
50,000+$0.3175
100,000+$0.2763
250,000+$0.2538
- +
Ext. Price(USD):$8,100.00
MOQ:21,600
Mult:21,600
SPQ:21,600
Wire-to-Board Connector HDR 22 POS 3mm Solder RA Side Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.9941
- +
Ext. Price(USD):$1,789.38
MOQ:1,800
Mult:1,800
SPQ:600
Wire-to-Board Header 6 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.376
- +
Ext. Price(USD):$1,128.00
MOQ:3,000
Mult:1,500
SPQ:500
JST
ECAD Model:
Shrouded Header (4 Sides), HDR 7 Pos, 2mm Pitch, Solder, ST Top Entry, Thru-Hole, Box
Pre-order
120,000
Factory Lead Time:18-22 weeks
26+
12,000+$0.0619
36,000+$0.0609
60,000+$0.0594
- +
Ext. Price(USD):$742.80
MOQ:12,000
Mult:12,000
SPQ:12,000
25 / PageGoto