Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board HDR 4 POS 4.2mm Solder ST Top Entry Thru-Hole T/R
Pre-order
500,000
Factory Lead Time:15 weeks
1,000+$0.7068
- +
Ext. Price(USD):$706.80
MOQ:1,000
Mult:1,000
SPQ:500
Wire-to-Board HDR 6 Pos 4.2mm Solder RA Side Entry TH
Pre-order
1,035,000
Factory Lead Time:15 weeks
2,070+$0.4944
- +
Ext. Price(USD):$1,023.40
MOQ:2,070
Mult:2,070
SPQ:690
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.8008
- +
Ext. Price(USD):$960.96
MOQ:1,200
Mult:1,200
SPQ:400
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 7 POS 2mm Solder ST Thru-Hole Tube
Pre-order
225,000
Factory Lead Time:22-26 weeks
2,250+$1.1
4,500+$1.0375
- +
Ext. Price(USD):$2,475.00
MOQ:2,250
Mult:2,250
SPQ:2,250
Molex
ECAD Model:
Conn Socket Strip RCP 30 POS 2.54mm Solder ST Top Entry Thru-Hole C-Grid III™ Tube
Pre-order
175,000
Factory Lead Time:22-26 weeks
1,750+$3.8125
- +
Ext. Price(USD):$6,671.87
MOQ:1,750
Mult:1,750
SPQ:1,750
JST
ECAD Model:
Conn Shrouded Header HDR 50 POS 1mm Solder RA SMD T/R
Pre-order
40,000
Factory Lead Time:18-22 weeks
26+
4,000+$1.2655
12,000+$1.2443
20,000+$1.2127
- +
Ext. Price(USD):$5,062.00
MOQ:4,000
Mult:4,000
SPQ:4,000
Connectors, 2.5mm Pitch, Disconnectable, Crimp Style
Pre-order
5,000
Factory Lead Time:18 weeks
500+$0.8308
2,500+$0.8101
- +
Ext. Price(USD):$415.40
MOQ:500
Mult:500
SPQ:500
Wire-to-Board Connector HDR 4 Pos 4.2mm Solder Right Angle Side Entry TH Tray
Pre-order
1,800,000
Factory Lead Time:15 weeks
3,600+$1.3283
- +
Ext. Price(USD):$4,781.88
MOQ:3,600
Mult:1,200
SPQ:1,200
JST
ECAD Model:
Pre-order
240,000
Factory Lead Time:18-22 weeks
26+
24,000+$0.0942
72,000+$0.0927
120,000+$0.0904
- +
Ext. Price(USD):$2,260.80
MOQ:24,000
Mult:24,000
SPQ:24,000
Conn HDR and Receptacle 3 POS 2.5mm Solder ST TH Box/Tube
Pre-order
540,000
Factory Lead Time:22-26 weeks
5,400+$0.35
50,000+$0.28
100,000+$0.245
250,000+$0.2163
- +
Ext. Price(USD):$1,890.00
MOQ:5,400
Mult:5,400
Conn Unshrouded Header M 72 POS 2.54mm Solder Thru-Hole
Available Stock
703
Estimated Ship Time:6-12 working days
1+$3.7709
10+$3.3787
500+$3.258
1,000+$3.258
- +
Ext. Price(USD):$26.39
MOQ:7
Mult:1
JST
ECAD Model:
IDC Connector RCP 7 POS 2.5mm IDT RA Cable Mount Box
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.1885
18,000+$0.1853
30,000+$0.1806
- +
Ext. Price(USD):$1,131.00
MOQ:6,000
Mult:6,000
SPQ:6,000
Dinkle
ECAD Model:
PCB connector socket Iron soldering Pitch 5.08 mm 300V 15A
Available Stock
3,000
Estimated Ship Time:3-4 weeks
26+
100+$1.6071
- +
Ext. Price(USD):$160.71
MOQ:100
Mult:50
SPQ:100
Minitek Reg Pwr 3.0 Wire-to-Board Connector, Single Row Right Angle Header, TH
Pre-order
2,000,000
Factory Lead Time:15 weeks
4,000+$1.0236
- +
Ext. Price(USD):$4,094.40
MOQ:4,000
Mult:4,000
SPQ:2,000
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$4.9147
- +
Ext. Price(USD):$6,634.84
MOQ:1,350
Mult:1,350
SPQ:675
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 4 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
36
Estimated Ship Time:3-5 working days
08+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Connector Header 4 Pos 4.2mm Soldering Straight Top Entry Thru-Hole
Pre-order
2,700,000
Factory Lead Time:15 weeks
5,400+$1.8402
- +
Ext. Price(USD):$9,937.08
MOQ:5,400
Mult:5,400
SPQ:1,800
Pre-order
114,000
Factory Lead Time:22-26 weeks
1,140+$1.7375
2,280+$1.55
5,320+$1.45
10,260+$1.3625
- +
Ext. Price(USD):$1,980.75
MOQ:1,140
Mult:1,140
SPQ:1,140
Shrouded Header 12 POS Straight
Available Stock
2,103
Estimated Ship Time:14-17 working days
50+$0.6494
100+$0.5499
2,000+$0.469
4,000+$0.4667
- +
Ext. Price(USD):$50.00
MOQ:77
Mult:1
SPQ:1
Wire-to-Board Connector, 4.2mm, Right Angle Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.6557
- +
Ext. Price(USD):$8,444.07
MOQ:5,100
Mult:5,100
SPQ:1,700
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 6 POS 1.5mm Solder ST Top Entry Thru-Hole Box
Pre-order
480,000
Factory Lead Time:18-22 weeks
26+
48,000+$0.0757
144,000+$0.0743
240,000+$0.0725
- +
Ext. Price(USD):$3,633.60
MOQ:48,000
Mult:48,000
SPQ:48,000
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 5 POS 2.5mm Solder ST Thru-Hole Bag
Available Stock
20
Estimated Ship Time:3-5 working days
06+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Miniature Interconnection System Connector, RCP, 10 POS, 2.5mm Pitch, Solder, Right Angle, Thru-Hole, Box
Pre-order
150,000
Factory Lead Time:25-42 weeks
1,500+$1.8931
- +
Ext. Price(USD):$2,839.65
MOQ:1,500
Mult:1,500
SPQ:1,500
Molex
ECAD Model:
Conn Board to Board RCP 30 POS 0.5mm Solder ST SMD SlimStack T/R
Available Stock
11
Estimated Ship Time:3-5 working days
15+
10+$1.3692
30+$1.3331
50+$1.2863
- +
Ext. Price(USD):$13.69
MOQ:10
Mult:10
SPQ:10
Board-to-Board Connector RCP 80 POS 0.5mm Solder ST Top Entry SMD Reel
Available Stock
190
Estimated Ship Time:7-12 working days
25+$8.7978
50+$8.3036
- +
Ext. Price(USD):$246.33
MOQ:28
Mult:1
SPQ:1
25 / PageGoto