Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Molex
ECAD Model:
Unshrouded Header HDR 16 POS 2.54mm Solder ST Thru-Hole C-Grid III Tray
Pre-order
120,000
Factory Lead Time:22-26 weeks
1,200+$2.2375
2,400+$2.2
2,500+$1.9125
5,000+$1.775
- +
Ext. Price(USD):$2,685.00
MOQ:1,200
Mult:1,200
SPQ:1,200
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.5616
- +
Ext. Price(USD):$1,405.44
MOQ:900
Mult:900
SPQ:300
Available Stock
2,957
Estimated Ship Time:6-7 working days
22+
20+$0.7176
500+$0.2396
- +
Ext. Price(USD):$14.35
MOQ:20
Mult:20
Board to Board Connector RCP 10 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
20
Estimated Ship Time:6-7 working days
20+$0.7344
- +
Ext. Price(USD):$14.68
MOQ:20
Mult:20
JST
ECAD Model:
Board to Board Connector RCP 10 POS 2.5mm Solder ST Thru-Hole Box
Available Stock
200
Estimated Ship Time:14-17 working days
100+$0.4727
300+$0.3835
4,000+$0.3299
5,000+$0.3299
- +
Ext. Price(USD):$50.10
MOQ:106
Mult:1
SPQ:1
Molex
ECAD Model:
Conn Wire to Board HDR 3 POS 1.2mm Solder ST SMD Pico-EZmate T/R
Available Stock
19
Estimated Ship Time:3-5 working days
08+
1+$1.8473
30+$1.8164
50+$1.7527
- +
Ext. Price(USD):$1.84
MOQ:1
Mult:1
SPQ:1
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Single Row Vertical Through Hole Header
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.0115
- +
Ext. Price(USD):$5,158.65
MOQ:5,100
Mult:5,100
SPQ:1,700
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 2 POS 2mm Solder RA Thru-Hole Box
Available Stock
2
Estimated Ship Time:4-6 working days
20+
1+$0.0217
- +
Ext. Price(USD):$0.02
MOQ:1
Mult:1
SPQ:1
CONNECTOR, HEADER, 30POS, 2ROW, 2.54MM; Pitch Spacing:2.54mm; No. of Contacts:30Contacts; Gender:Header; Product Range:-; Contact Termination Type:Surface Mount; No. of Rows:2Rows; Contact Plating:Gold Plated Contacts; C
Available Stock
2,840
Estimated Ship Time:6-12 working days
10+$0.7105
50+$0.7105
100+$0.6366
200+$0.6366
- +
Ext. Price(USD):$24.15
MOQ:34
Mult:1
Lumberg
ECAD Model:
Conn Board to Board RCP 6 POS 5mm Solder RA Thru-Hole Bulk
Pre-order
200,000
Factory Lead Time:8-10 weeks
1+$0.941
- +
Ext. Price(USD):$376.40
MOQ:400
Mult:200
SPQ:200
Pre-order
472,500
Factory Lead Time:15 weeks
945+$10.4212
- +
Ext. Price(USD):$9,848.03
MOQ:945
Mult:945
SPQ:315
Wire-to-Board HDR 12 Pos 4.2mm Solder ST Top Entry TH Tray
Pre-order
810,000
Factory Lead Time:15 weeks
1,620+$5.0243
- +
Ext. Price(USD):$8,139.36
MOQ:1,620
Mult:1,620
SPQ:540
Molex
ECAD Model:
0.50mm Pitch Board-to-Board Shutter I/O Receptacle, SMD, Shielded, Right-Angle, 18 Circuits, Silver
Available Stock
68
Estimated Ship Time:3-5 working days
07+
10+$0.2174
50+$0.2136
100+$0.2062
- +
Ext. Price(USD):$2.17
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header, 24 Pos, 4.2mm Pitch, Solder, ST Top Entry, Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.6678
- +
Ext. Price(USD):$1,501.02
MOQ:900
Mult:900
SPQ:300
Wire-to-Board Header 8 POS 4.2mm Solder Right Angle Side Entry Thru-Hole T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$2.7803
- +
Ext. Price(USD):$3,753.40
MOQ:1,350
Mult:1,350
SPQ:450
Harwin
ECAD Model:
Conn Datamate M 6 POS 2mm Solder ST SMD Tube
Available Stock
152
Estimated Ship Time:7-12 working days
25+$8.4024
- +
Ext. Price(USD):$243.66
MOQ:29
Mult:1
SPQ:1
Wire-to-Board HDR, 2 Pos, 3mm Pitch, Solder, ST Top Entry, TH, T/R
Pre-order
1,350,000
Factory Lead Time:15 weeks
2,700+$0.6512
- +
Ext. Price(USD):$1,758.24
MOQ:2,700
Mult:2,700
SPQ:900
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 11 POS 2mm Solder ST Top Entry Thru-Hole
Available Stock
1,800
Estimated Ship Time:4-6 working days
225+$0.5825
- +
Ext. Price(USD):$131.06
MOQ:225
Mult:225
SPQ:225
Pre-order
123,000
Factory Lead Time:22-26 weeks
1,230+$1.85
2,460+$1.75
5,002+$1.6375
10,004+$1.5375
- +
Ext. Price(USD):$2,275.50
MOQ:1,230
Mult:1,230
SPQ:1,230
Pre-order
132,000
Factory Lead Time:22-26 weeks
1,320+$3.9125
5,005+$3.65
10,010+$3.4375
- +
Ext. Price(USD):$5,164.50
MOQ:1,320
Mult:1,320
SPQ:1,320
Wire-to-Board HDR 12-Pin 4.2mm Solder Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$1.0288
- +
Ext. Price(USD):$1,234.56
MOQ:1,200
Mult:1,200
SPQ:400
Conn Wire to Wire HDR 11 POS 1mm IDT ST Cable Mount Box
Available Stock
6,185
Estimated Ship Time:6-7 working days
22+
20+$0.362
200+$0.1875
- +
Ext. Price(USD):$7.24
MOQ:20
Mult:20
Minitek Reg Pwr 3.0 Wire To Board Connector Header Dual Row Right Angle SMT Tails And Hold Down Gold Flash Plating Black Color 18 Positions Glow Wire Compatible
Pre-order
3,000,000
Factory Lead Time:15 weeks
6,000+$2.124
- +
Ext. Price(USD):$12,744.00
MOQ:6,000
Mult:6,000
SPQ:600
Molex
ECAD Model:
Conn Wire to Board HDR 15 POS 1.25mm Solder ST SMD Mini Mi II T/R
Available Stock
50
Estimated Ship Time:3-5 working days
07+
10+$0.4781
50+$0.47
100+$0.4535
- +
Ext. Price(USD):$4.78
MOQ:10
Mult:10
SPQ:10
Wire-to-Board Header 8 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
750,000
Factory Lead Time:15 weeks
1,500+$0.7312
- +
Ext. Price(USD):$1,096.80
MOQ:1,500
Mult:1,500
SPQ:500
25 / PageGoto