Other Card Edge Components

Results:

Other card edge components include specialized or supplementary connector products that are not grouped with standard edgeboard connectors, housings, contacts, adapters or accessories. Because products in this category can use different interface and mounting formats, begin with the manufacturer part number and datasheet, identify the actual connector type, and then compare its mating and PCB requirements.

Pass the Part Identity Checkpoint

The category name alone does not define a single connector format. Use the following identification sequence before comparing products or approving a substitute.

1
Capture the Manufacturer Part Number Record the complete part number, manufacturer and product series without removing suffixes.
2
Identify the Actual Connector Type Determine whether the part is a header, socket, card-edge connector or another specialized component.
3
Confirm the Mating Interface Establish whether the product connects to a PCB card edge, another PCB, a cable assembly or a separate connector.
4
Decode the Physical Format Compare positions, rows, pitch, orientation, mounting type and termination method.
5
Verify the Datasheet Confirm the mating drawing, recommended PCB layout, ratings, materials and compatible product series.

Use the Part Number as the Primary Identifier

Product descriptions can be shortened or normalized across distributor databases. The complete manufacturer part number provides the most reliable route to the original drawing and product specification.

Manufacturer + Base Part Number + Prefix and Suffix + Series

Prefixes and suffixes may identify contact finish, packaging, mounting variation, keying or another configuration detail. Compare the complete ordering code when evaluating replacements.

Determine What the Part Connects

Establish the connection path before interpreting positions, pitch or mounting details. Products in this category may serve different interconnection functions.

PCB ↔ PCB
Board connection Confirm the interface on both boards, installed spacing and mating orientation.
PCB ↔ Cable
Wire connection Identify the mating housing, contact system, wire range and termination method.
Card ↔ Host
Card-edge interface Check card thickness, conductive-finger arrangement, insertion geometry and keying.

Decode the Connector Format

Once the product type and mating interface are known, translate the mechanical specification into a comparable set of fields.

Connector type Header, socket, receptacle, card-edge connector or another specified component.
Positions and rows Confirm the total number of electrical positions and how they are distributed across rows.
Pitch Match the center-to-center spacing of contacts or terminals to the mating product and PCB.
Orientation Check straight, vertical, right-angle, top-entry or side-entry configuration as applicable.
Mounting and termination Verify surface mount or through-hole installation and the specified solder or contact termination.

Match the PCB Installation

The connector body may fit the available space while its terminals or recommended footprint remain incompatible with the board. Check the complete installation drawing.

PCB footprint Compare pad or hole locations, terminal pattern, tolerances and keep-out areas.
Installed envelope Check connector height, body width, card approach and surrounding component clearance.
Assembly process Confirm soldering method, mounting hardware, packaging and automated assembly requirements.

Confirm the Mating Component

A compatible pitch and position count do not establish a complete mating match. Use the manufacturer’s drawing or related-products list to verify the opposing connector, housing, contact or PCB interface.

✓ Mating manufacturer part number ✓ Compatible product series ✓ Contact gender and arrangement ✓ Keying and polarization ✓ Engagement and insertion depth ✓ Electrical and temperature ratings

Build a Verifiable Part Identity

Save the identifying and mating information together so that purchasing, engineering and incoming inspection use the same product definition.

Part identity record
Manufacturer + Part number | Connector type | Mating product | Positions × pitch | Mounting

If the required product is already identifiable as a complete edgeboard connector, housing, contact, adapter or accessory, browse Card Edge Connectors & Components to select the corresponding product group.

Read More
Other Card Edge ComponentsResults:
Comprehensive
Price Priority
Stock Priority
Image
Part Number
Description
Availability
Unit Price(USD)
Quantity
Operation
Wire-to-Board Header, 20 Pos, 4.2mm Pitch, Solder, Straight Top Entry Thru-Hole, T/R
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.4676
- +
Ext. Price(USD):$1,320.84
MOQ:900
Mult:900
SPQ:300
Wire-to-Board HDR 10-Pin 4.2mm Pitch Solder RA Side Entry TH T/R
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$3.252
- +
Ext. Price(USD):$4,390.20
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board HDR, 12 Pos, 4.2mm Pitch, Solder RA Side Entry, TH, Tray
Pre-order
675,000
Factory Lead Time:15 weeks
1,350+$0.9088
- +
Ext. Price(USD):$1,226.88
MOQ:1,350
Mult:1,350
SPQ:450
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$0.7103
- +
Ext. Price(USD):$852.36
MOQ:1,200
Mult:1,200
SPQ:400
TERMINAL BLOCK, HEADER, 6POS, TH; Gender:Header; Pitch Spacing:5.08mm; No. of Positions:6Ways; Rated Current:15A; Rated Voltage:300V; Block Orientation:Through Hole Right Angle; Product Range:-; SVHC:No SVHC (07-Jul-2017
Available Stock
4,840
Estimated Ship Time:6-12 working days
10+$1.1299
100+$1.1097
500+$1.1097
1,000+$1.0895
2,500+$1.0895
- +
Ext. Price(USD):$24.85
MOQ:22
Mult:1
JST
ECAD Model:
Conn Header PCB Copper Alloy
Pre-order
6,480
Factory Lead Time:18-22 weeks
26+
648+$1.2485
1,944+$1.2277
3,240+$1.1965
- +
Ext. Price(USD):$809.02
MOQ:648
Mult:648
SPQ:648
Conn Shrouded Header HDR 9 POS 1.5mm Solder ST Thru-Hole Box
Pre-order
72,800
Factory Lead Time:16-18 weeks
7,280+$0.0796
- +
Ext. Price(USD):$579.48
MOQ:7,280
Mult:7,280
Connectors 1.25mm Pitch Disconnectable Crimp Style
Available Stock
900
Estimated Ship Time:14-17 working days
50+$0.9343
100+$0.7861
2,000+$0.6328
4,000+$0.6305
- +
Ext. Price(USD):$50.45
MOQ:54
Mult:1
SPQ:1
Wire-to-Board HDR 12 POS 3mm Solder ST Top Entry Thru-Hole T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$0.7626
- +
Ext. Price(USD):$1,372.68
MOQ:1,800
Mult:1,800
SPQ:600
JST
ECAD Model:
Conn Shrouded Header HDR 2 POS 2mm Solder RA Thru-Hole Box
Available Stock
24,000
Estimated Ship Time:4-6 working days
1,000+$0.1016
2,000+$0.0906
5,000+$0.0834
- +
Ext. Price(USD):$101.60
MOQ:1,000
Mult:1,000
SPQ:1,000
Header, 2.54mm Pitch, Vertical, 4 Circuits
Pre-order
1,000,000
Factory Lead Time:6-8 weeks
26+
10,000+$0.6734
30,000+$0.6465
50,000+$0.6195
- +
Ext. Price(USD):$6,734.00
MOQ:10,000
Mult:10,000
SPQ:10,000
Wire-to-Board HDR 6 Pos 3mm Solder ST Top Entry TH T/R
Pre-order
900,000
Factory Lead Time:15 weeks
1,800+$1.1073
- +
Ext. Price(USD):$1,993.14
MOQ:1,800
Mult:1,800
SPQ:600
Minitek Reg Pwr 4.2 Hcc Wire-to-Board Connector, Header Single Row Right Angle Through Hole
Pre-order
2,550,000
Factory Lead Time:15 weeks
5,100+$1.3927
- +
Ext. Price(USD):$7,102.77
MOQ:5,100
Mult:5,100
SPQ:1,700
Wire-to-Board Header 16-Pos 4.2mm RA Side Entry TH Tray
Pre-order
495,000
Factory Lead Time:15 weeks
990+$1.0306
- +
Ext. Price(USD):$1,020.29
MOQ:990
Mult:330
SPQ:330
Molex
ECAD Model:
Pre-order
225,000
Factory Lead Time:22-26 weeks
2,250+$1.1
4,500+$1.0375
- +
Ext. Price(USD):$2,475.00
MOQ:2,250
Mult:2,250
SPQ:2,250
JST
ECAD Model:
Shrouded Header, HDR, 4 Pos, 2mm, Solder, ST, SMD, T/R
Pre-order
60,000
Factory Lead Time:18-22 weeks
26+
6,000+$0.2194
18,000+$0.2158
30,000+$0.2103
- +
Ext. Price(USD):$1,316.40
MOQ:6,000
Mult:6,000
SPQ:6,000
Wire-to-Board Header 14 Pos 4.2mm Solder Straight Top Entry Thru-Hole T/R
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$5.4735
- +
Ext. Price(USD):$6,568.20
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Unshrouded Header, 9-Pin, 2.5mm Pitch, Solder, Right Angle, Thru-Hole
Available Stock
500
Estimated Ship Time:14-17 working days
50+$0.6453
100+$0.559
4,000+$0.3899
10,000+$0.3899
- +
Ext. Price(USD):$50.33
MOQ:78
Mult:1
SPQ:1
Molex
ECAD Model:
1.50mm Pitch Click Mate PCB Receptacle Single Row SMD Right Angle Tin Plating Positive Lock 4 Circuits Black
Pre-order
600,000
Factory Lead Time:22-26 weeks
6,000+$0.5125
12,000+$0.45
30,000+$0.4375
- +
Ext. Price(USD):$3,075.00
MOQ:6,000
Mult:6,000
Molex
ECAD Model:
TEN60 Right Angle Plug Assembly
Pre-order
60,000
Factory Lead Time:22-26 weeks
600+$19.425
1,200+$17
3,000+$16.6375
- +
Ext. Price(USD):$11,655.00
MOQ:600
Mult:600
Minitek Wire-to-Board Connector Header, Dual Row, Right Angle, Through Hole
Pre-order
450,000
Factory Lead Time:15 weeks
900+$1.8088
- +
Ext. Price(USD):$1,627.92
MOQ:900
Mult:900
SPQ:450
Pre-order
1,209,000
Factory Lead Time:8 weeks
2,418+$0.665
- +
Ext. Price(USD):$1,607.97
MOQ:2,418
Mult:2,418
SPQ:2,418
Molex
ECAD Model:
Conn Shrouded Header (4 Sides) M 26 POS 2mm Solder RA Side Entry Thru-Hole Tube
Pre-order
453,600
Factory Lead Time:22-26 weeks
4,536+$1.225
- +
Ext. Price(USD):$5,556.60
MOQ:4,536
Mult:4,536
SPQ:4,536
Pre-order
600,000
Factory Lead Time:15 weeks
1,200+$4.5508
- +
Ext. Price(USD):$5,460.96
MOQ:1,200
Mult:1,200
SPQ:400
JST
ECAD Model:
Conn Shrouded Header (4 Sides) HDR 12 POS 2mm Solder ST Top Entry Thru-Hole
Pre-order
72,000
Factory Lead Time:18-22 weeks
26+
7,200+$0.7367
21,600+$0.7244
36,000+$0.706
- +
Ext. Price(USD):$5,304.24
MOQ:7,200
Mult:7,200
SPQ:7,200
25 / PageGoto